Process data set overview page

Data set: Uniplan 200 Zero (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Uniplan 200 Zero

Location NO

Reference year 2024

Valid until 2029

Reference flow(s) Uniplan 200 Zero - 1.0 * 1.0 kg (Mass)

Type EPD

Parameterized? no

LCIA results included? yes

Category Byggevarer / Teknisk-kjemiske byggevareprodukter

Synonyms

Use advice for data set The approach is “cradle to gate” (A1–A3) with modules C1–C4 and module D and optional modules (A1–A3 + A4 – A5 + C + D). The production process starts from raw materials, that are purchased from external and intercompany suppliers and stored in the plant. Bulk raw materials are stored in specific silos and added automatically in the production mixer, according to the formula of the product. Other raw materials, supplied in bags, big bags or tanks, are stored in the warehouse and added automatically or manually in the mixer. The production is a discontinuous process, in which all the components are mechanically mixed in batches. The semi-finished product is then packaged, put on wooden pallets and stored in the finished products warehouse. The quality of final products is controlled before the sale.

Data set use approval

General comment Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Linda Høibye

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Mapei S.p.A

Technical purpose Uniplan 200 Zero is a pumpable, normal drying, cement-based, self-levelling compound for levelling and smoothing of new and existing concrete and cementitious substrates. Intended for indoor use both on new construction and renovation for residential housing, offices, commercial and public buildings, and can be used with mechanical adhesion to the substrate. Uniplan 200 Zero is available in 20kg bag. • Can be applied in thicknesses from 3 to 40 mm per layer. • Can be covered after 1 - 4 weeks depending on the thickness. • Can be covered with all types of resilient floor coverings, textiles, floating parquet and laminate, ceramics and natural stone. • Water amount 3.6 – 3.8 liter per 20 kg bag (18 – 19%). For more information see the TDS (Technical Data Sheet) on Mapei AS website (www.mapei.com/no).

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2025-01-09T22:39:42

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo