Process data set overview page

Data set: Sto-InnoDrain (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name Sto-InnoDrain

Location SE

Reference year 2024

Valid until 2029

Reference flow(s) Sto-InnoDrain - 1.0 * 1.0 qm (Area)

Type EPD

Parameterized? no

LCIA results included? yes

Category Bygg / Isolasjon

Synonyms

Use advice for data set The approach is “cradle-to-grave” but with exclusion of the use stage (B1-B7). Stage B1-B7 is not applicable for this thermal insulation product. Sto-InnoDrain does not require any actions or maintenance operations during the use stages. The following modules have been considered: A1, A2, A3 (Product stages): Extraction and transport of raw materials, including packaging, and manufacturing process A4 (Transport to market): Transportation from manufacturing plant to customer A5 (Assembly): Installation at construction site C1, C2, C3, C4 (End of life stages): Deconstruction, demolition, transport to waste processing, waste processing for reuse, recovery and/or recycling and disposal D (Benefits and loads beyond the system boundaries): Reuse/recovery/recycling potential

Data set use approval

General comment Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Elisabet Amat

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Sto SE & Co. KGaA

Technical purpose Sto-InnoDrain is an insulation board of expanded polystyrene according to EN 13163 with a drainage effect. Sto-InnoDrain is used as a facade insulation board intended for outdoor use, in StoTherm Vario D or in other StoTherm facade systems exposed to moisture. The board should be glued or plugged and glued on the facade. Sto-InnoDrain is manufactured by heating polystyrene grains, containing approximately 5% pentane, with steam. The polystyrene grains expand until they contain 98% of air. The pre-expanded polystyrene will first be dried, before mixing with additional materials. The EPS-mixture is thereafter dried and moulded under compression. After the stabilization phase, the products are ready for packaging and labelling. Sto-InnoDrain boards which don't pass the quality control at the production site, are recycled into new Sto-InnoDrain boards. Sto-InnoDrain is provided in several thicknesses. The average density of Sto-InnoDrain boards with thickness between 30 mm - 200 mm is approximately 23 kg/m³. Weight per declared unit is 0,759 kg with density of 23 kg/m³ and thickness of 33 mm. Please use the conversion table in this EPD, page 4, for other thicknesses then the declared unit.

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2024-12-27T13:09:46

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo