Process data set overview page

Data set: StoLevell Cote F (00.03.000)

View entire data set

Download data set as XML file

Download as ZIP file

Full name StoLevell Cote F

Location SE

Reference year 2024

Valid until 2029

Reference flow(s) StoLevell Cote F - 1.0 * 1.0 kg (Mass)

Type EPD

Parameterized? no

LCIA results included? yes

Category Bygg / Teknisk-kjemiske byggevareprodukter

Synonyms

Use advice for data set The approach is “cradle-to-grave” but with exclusion of the use stage (B1-B7). Stage B1-B7 is not applicable for this cement based product. StoLevell Cote F does not require any actions or maintenance operations during the use stages. The following modules have been considered: A1, A2, A3 (Product stages): Extraction and transport of raw materials, including packaging, and manufacturing process A4 (Transport to market): Transportation from manufacturing plant to customer A5 (Assembly): Installation at construction site C1, C2, C3, C4 (End of life stages): Deconstruction, demolition, transport to waste processing, waste processing for reuse, recovery and/or recycling and disposal D (Benefits and loads beyond the system boundaries): Reuse/recovery/recycling potential

Data set use approval

General comment Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Linda Høibye

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Sto SE & Co. KGaA

Technical purpose This EPD covers the following products: StoLevell Cote F 0-1 mm StoLevell Cote F 0-3 mm The 2 products are within ± 10% for the GWP-total factor. The product with the highest GWP has been used as the basis for this EPD. Area of application: For exterior and interior use For all mineral substrates Properties: - hydrophobic - good adhesion to the substrate - weatherproof - water vapor permeable - crack-bridging if embedded mesh is used

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2024-12-27T13:11:36

Data set format

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo