Process data set overview page

Data set: A22 seat height 63 (00.03.000)

Most recent version of this data set:00.04.000

View entire data set

Download data set as XML file

Download as ZIP file

Full name A22 seat height 63

Location SE

Reference year 2024

Valid until 2029

Reference flow(s) A22 seat height 63 - 1.0 * 1.0 Stück (Number of pieces)

Type EPD

Parameterized? no

LCIA results included? yes

Category

Synonyms

Use advice for data set The analysis is a cradle-to-cradle, A1-D, where some B-stages that were assumed to be neglectable are not included. The A1-A4 stages includes the extraction and production of raw materials, transportation to the production site, the production process itself, and an estimated transport distance to the market. A5 includes the generated waste from the packaging of the product after the assembly at the customer. The only B-stage that is assumed to be relevant is B2, which includes assumptions on how the customer takes care of the product according to Lammhults' care instructions. The C- and D-stages includes the use of materials and energy for deconstruction, the transport to waste management, the waste processes, disposal of materials that cannot be processed, and the potential of reuse, recovery, and recycling of the product.

Data set use approval

General comment Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.

LCI Method Principle

LCI Method Approaches No records found.

Completeness of product model No statement

Reviews Independent external review by Elisabet Amat

License and access conditions Copyright yes License type Free of charge for all users and uses Access information None

Owner of data set Lammhults Möbel AB

Technical purpose A22 is a highly versatile stool designed for impromptu meetings and quick breaks in dynamic environments — at home or at work. To facilitate recycling and reuse, the stool is made entirely of steel, without any bolts or screws. A22 can be used both indoors and outdoors. A22 is available in three different seat heights, 46cm, 63 cm and 78 cm. The frame is made of Ø25 & 20 mm powder coated steel tubing, footrest of Ø15 mm zinc plated steel tubing on the two higher variants. Glides. Seat of 3mm powder coated perforated sheet steel. Loose reversible pad for indoor or outdoor use, as an option. Stackable. Product variants: Seat height 46cm Seat height 63cm Seat height 78cm

Input Products No records found.

Co-Products No records found.

Data set version 00.03.000

Time stamp (last saved) 2024-10-22T11:56:39

Data set format

Other versions 00.04.000

Compliance systems EN 15804+A2 (Overall compliance: Fully compliant) ISO 14025 (Overall compliance: Fully compliant) ISO 21930 (Overall compliance: Fully compliant)

Tag

Data Set deregistration

Are you sure you want to deregister selected dataset?

Please enter the reason of deregistration and confirm.

YesNo