soda4LCA
Data stock: PUBLIC

Process data set overview page

Data set: FireFree Fugeforsegler/Fugefiller (00.02.001)

Full name
FireFree Fugeforsegler/Fugefiller
Location
DE
Reference year
2025
Valid until
2030
Reference flow(s)
Type
EPD
Parameterized?
no
LCIA results included?
yes
Category
Bygg / Maling
Synonyms
Use advice for data set
The Construction Installation Stage, Use Stage, End of Life Stage, and Beyond System Boundaries have not been considered for the product, as these stages typically involve no related actions.
Data set use approval
General comment
Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
LCI Method Principle
LCI Method Approaches
No records found.
Completeness of product model
No statement
Reviews
  • Independent external review by
License and access conditions
Copyright
yes
License type
Free of charge for all users and uses
Access information
None
Owner of data set
Scandi Supply A/S
Technical purpose
FireFree Fugeforsegler/Fugefiller is a weather-resistant (use category X), ablative fire protection filler. The product is suitable for fire protection joints. For more information use our website: https://scandisupply.dk/produkter/lineaer-fuge/firefree-fugeforseglerfugefiller/ When exposed to fire, it undergoes a significant endothermic reaction, forming a protective, microporous carbon layer. This material is engineered for use in various passive fire protection applications within structural and industrial settings. It is particularly effective for fire protection joint sealings. FireFree Fugeforsegler/Fugefiller is suitable for both indoor use and installation in sheltered outdoor areas. Within the EU and EFTA, the product falls under the scope of Directive (EU) No. 305/2011 (CPR) for market placement. Compliance with this directive requires a Declaration of Performance in accordance with the relevant European Technical Assessments (ETAs), including ETA 25/0502 for linear joint and gap sealing in building components, along with the appropriate CE marking. The manufacture of FireFree Fugeforsegler/Fugefiller is optimized for efficiency and continuous improvement, certified to ISO 9001. Preliminary products undergo incoming inspection before use. Each batch is subject to internal quality control to ensure compliance with paint and fire protection standards, supplemented by regular external monitoring. Raw materials are stored securely to prevent environmental release. Worker safety is prioritized with minimal direct contact with raw materials, protective clothing, dust masks, and adequate extraction systems. Waste is sorted, stored, and returned to the recycling process wherever possible. FireFree Fugeforsegler/Fugefiller is a high-viscosity filler available in 600 ml cartridges and plastic containers of 12.5 kg. The following waste codes should be taken into account: 08 01 19* – aqueous suspensions containing paint or varnish with organic solvents or other hazardous substances. For additional information, please refer to the product's Safety Data Sheet. 100% of the known ingredients of the product have been considered in the environmental footprint calculation.
Input Products
No records found.
Co-Products
No records found.
Data set version
00.02.001
Time stamp (last saved)
2025-11-08T13:47:26
Data set format
Compliance systems
  • EN 15804+A2 (Overall compliance: Fully compliant)
  • ISO 14025 (Overall compliance: Fully compliant)
  • ISO 21930 (Overall compliance: Fully compliant)
Tag
Data Set deregistration
Are you sure you want to deregister selected dataset?
Please enter the reason of deregistration and confirm.