|
Owner of data set Sto SE & Co. KGaA |
Technical purpose Sto-Resol Insulation Board is a thermal insulation board made from rigid phenolic foam and glass fleece facings on both sides in accordance with EN 13166. The use of the product is in exterior application, for example in wall insulation systems such as StoTherm Resol and StoTherm Resol Plus. The product is available with a thickness between 2 cm and 20 cm. Sto is acting as trader for the insulation board. The supplier is located in Europe.
This EPD covers the insulation board with a thickness of 10 cm and a format of 120 x 40 cm and a RD-value of 4,75 m²·K/W. The grammage is equal to 3.88 kg/ m². If calculating different thicknesses, it is paramount to use the calculation table provided by Sto for the correct result.
For the placing on the market of the product in the European Union/European Free Trade Association (EU/EFTA) (with the exception of Switzerland) Regulation (EU) No. 305/2011 (CPR) applies. The product needs a declaration of performance taking into consideration EN 13166 - Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification and the CE-marking. For the application and use the respective national provisions apply.
In the current REACH regulations, phenolic foam insulation products are considered 'articles' and are exempt from the requirements of Article 57 and 59(1) of REACH Regulation (EC) No 1907/2006. These products are not classified as 'hazardous products' according to any current legislation, and can hence be declared as follows:
- This article contains substances listed in the candidate list
(date: 12.07.2024) exceeding 0.1 percentage by mass: no.
- This article contains other carcinogenic, mutagenic, reprotoxic
(CMR) substances in categories 1A or 1B which are not on the
candidate list, exceeding 0.1 percentage by mass: no.
- Biocide products were added to this construction product or it
has been treated with biocide products (this then concerns a
treated product as defined by the (EU) Biocidal Products
Regulation No. 528/2012 (BPR): no.'
The chemical functional group of the additives used in the resin is that of non-ionic surfactants. The blowing agent is permanent due to the closed cell structure.
The main materials of Sto-Resol Insulation Board are as stated below. The exact amount depends on the thickness of the board. |
