Process Data set: Inspire S 300 (en)

Process Data set: Inspire S 300 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Inspire S 300
Technical purpose of product or process	Inspire S is a rectangular surface mounted downlight for indoor use. With cubist black reflectors it has very low glare and harmonious non-flickering light with a well-defined light pattern. Inspire S is suitable for use in high-end residential and commercial environments. Easy installation with ceiling bracket, quick connector and snap attachment. Suitable for open or hidden cabling. System Wattage: 15.0 W. Luminous flux: 950 lm. Efficacy: 63 lm/W. Colour temperature: 3000K. Colour rendering: Ra 98. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class I. Housing: Aluminium. Optics: . Height: 85.0mm. Length: 300.0 mm. Width: 59.0 mm. EAN: 7021983208309 The EPD also covers the following products: EAN: 7021983208262 - INSPIRE S 300 WHITE 2700K EAN: 7021983208279 - INSPIRE S 300 WHITE 3000K EAN: 7021983208286 - INSPIRE S 300 WHITE 4000K EAN: 7021983208293 - INSPIRE S 300 BLACK 2700K EAN: 7021983208316 - INSPIRE S 300 BLACK 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Inspire S 300 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.060518518522 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-05-09 - 2030-05-09
Publication date	2025-05-09
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/inspire-s/320830/pdf/specification_320830.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702840_Inspire%20S/50/702840_Inspire%20S.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11018-9967_Inspire-S-300-.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-25T10:20:00
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	feb4138d-aa43-466f-ba86-e2950198aeb1
Date of last revision	2025-05-08T14:57:57.0756055Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11018-9967
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	20.7	0.0035	0.4542	0.07717	0.0004866	2134	0.009713	0.04409	0.04482	-0.628
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.808	0	0	0	-0.808	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	21.51	0.0035	0.4542	0.07717	-0.8075	2134	0.009713	0.04409	0.04482	-0.628
Use of non renewable primary energy (PENRE)	Input	MJ	163	0.3093	4.529	6.792	0.02956	165	0.8582	0.3024	0.1817	-4.044
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.889	0	0	0	0	0	0	-3.516	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	165.9	0.3093	4.529	6.792	0.02956	165	0.8582	-3.214	0.1817	-4.044
Use of secondary material (SM)	Input	kg	0.8499	0	0	0	0	0	0	0	0.0008895	0.005631
Use of renewable secondary fuels (RSF)	Input	MJ	0.158	0.00006846	0.0003932	0.002543	0.00001614	1.676	0.00019	0.0006821	0.0002972	-0.001
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.025	0.0005813	0.003719	0.01362	0.00006654	4.175	0.001613	-0.00002822	0.007718	-0.08509
Use of net fresh water (FW)	Input	m3	0.1376	0.00003458	0.01192	0.000584	0.00001395	15.94	0.00009597	0.0003454	0.0001626	-0.002166
Hazardous waste disposed (HWD)	Output	kg	0.0894	0.00002795	0.0006204	0.0003312	0	0.1058	0.00007756	0.00001358	0.04962	-0.002124
Non hazardous waste dispose (NHWD)	Output	kg	1.909	0.01485	0.04236	0.2097	0.1306	12.69	0.0412	0.01841	0.2747	-0.03098
Radioactive waste disposed (RWD)	Output	kg	0.0004285	0.00000203	0.000003552	0.00004661	0	0.001475	0.000005632	6.863E-7	5.901E-7	-0.00001265
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02936	0	0.1215	0	0	0.6063	0.000004276	-0.0002235
Materials for energy recovery (MER)	Output	kg	0	0	0.004814	0	0.0003707	0	0	0.04767	1.046E-7	-0.00002941
Exported electrical energy (EEE)	Output	MJ	0	0	0.004466	0	0.007471	0	0	0.07325	0.000006785	-0.00007319
Exported thermal energy (EET)	Output	MJ	0	0	0.06756	0	0.113	0	0	1.108	0.0001026	-0.001107

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	165.9	0.3092	4.529	6.792	0.02956	164.8	0.8582	0.3023	0.1815	-4.042
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.003804	5.615E-7	0.000001573	0.000009167	5.143E-8	0.0009001	0.000001558	2.306E-7	7.871E-8	-0.0006799
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.115	0.00006261	0.002671	0.007414	0.00001001	0.09431	0.0001738	0.0001395	0.00006969	-0.03059
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1109	0.00000815	0.0007813	0.0001706	0.2209	0.3337	0.00002262	0.00005844	0.000008187	-0.000747
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	14.35	0.02093	0.5067	0.481	0.002113	12.07	0.05809	0.1424	0.01743	-0.2942
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	14.26	0.02095	0.5076	0.4812	0.2231	12.45	0.05813	0.1425	0.01752	-0.2934
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02941	0.000007653	0.00007976	0.0002395	6.988E-7	0.04979	0.00002124	0.00007411	0.00007897	0.001518
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	14.48	0.02095	0.4792	0.4812	0.002114	12.43	0.05813	0.1425	0.0183	-0.266
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001705	1.963E-7	0.00001131	0.000003069	1.735E-8	0.0008681	5.449E-7	9.421E-7	4.549E-7	-0.0001722
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01558	0.00001233	0.0005534	0.001784	0.000003309	0.01037	0.00003421	0.00003256	0.0000242	-0.001432
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1773	0.0001378	0.006091	0.01986	0.00003583	0.1349	0.0003826	0.0003558	0.000204	-0.02042
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.05626	0.00005162	0.001615	0.005368	0.0000103	0.03629	0.0001433	0.00009568	0.00007735	-0.005624
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000009883	4.551E-9	7.625E-9	1.06E-7	4.46E-10	8.277E-7	1.263E-8	2.033E-9	1.49E-9	-0.0005158
Water (user) deprivation potential (WDP)	m3 world eqv.	564.8	0.1008	0.727	4.498	0.03746	642.5	0.2799	2.894	2.082	56.66

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.539	0.001285	0.003951	0.02944	0.0001265	2.989	0	0.003567	0.001519	0.0006919	-0.01533
Potential incidence of disease due to PM emissions (PM)²	disease incidence	8.182E-7	1.357E-9	3.603E-8	1.7E-8	1.47E-10	6.762E-7	0	3.755E-9	9.01E-10	1.25E-9	-5.34E-8
Potential Soil quality index (SQP)²	unitless	47.92	0.2119	0.9606	3.277	0.01983	82.98	0	0.588	0.07107	0.4152	-5.269
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.207E-7	2.46E-10	6.477E-9	3.391E-9	5E-11	8.441E-7	0	6.83E-10	2.749E-8	3.9E-10	-1.094E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.206E-8	0	1.42E-10	0	1E-12	3.583E-8	0	0	4.66E-10	4.5E-11	-8.91E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	906.8	0.2507	13.25	4.627	0.03942	750.7	0	0.6957	0.7515	138.7	-228.8