| Oplysninger om nøgledatasæt | |
| Placering | FI |
| Beskrivelse af den geografiske repræsentativitet | Finland |
| Referenceår | 2024 |
| Navn |
|
| Rådgivning om brug af datasæt | All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Teknisk formål med produktet eller processen | The insulation board is provided in several dimensions and thicknesses. Please use the conversion table below for other sizes than the declared unit. Expanded polystyrene (EPS) is a common material used for thermal insulation of buildings and constructions. As most of the material is air, EPS provides good insulating properties at a low weight. Other characteristics of the material include low moisture absorption, long service life and high compressive strength. This LCA is based on EPS Lattia and can be used for all products with the conversion factor which can be found under System boundaries Raw EPS materail expand up to 40 times when exposed to steam. The expanded polystyrene beads are then fed into a block molding machine, where steam and pressure form large blocks of EPS. During these processes, the final density of the product is determined. EPS density is the main contributor to the mechanical and thermal resistances of EPS. The average density of EPS Lattia is around 18,2 kg/m³. |
| Klassifikation |
Klassens navn
:
Hierarkisk niveau
|
| Generelle bemærkninger til datasættet | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not? apply for hazardous materials and substances. |
| Copyright | Ja |
| Ejer af datasættet | |
| Kvantitativ reference | |
| Referenceflow(s) |
|
| Indhold af biogent kulstof |
|
| Tidsmæssig repræsentativitet | |
| Datasættet er gyldigt indtil | 2029 |
| Beskrivelse af tidsrepræsentativitet | "2024-05-27" - "2029-05-27" |
| Teknologisk repræsentativitet | |
| Teknologibeskrivelse, herunder baggrundssystem | CE marking: EPS insulation boards are CE certified according to SFS-EN 13163:2013 + A2:2016 Typical compressive strength: 60 - 200 kPa (EN 826) Typical bending strength: 100 - 250 kPa (EN 12089) Typical size: 600 mm x 1000 mm, 1000 x 1200 mm, 1200x2000 mm (EN822) Typical thickness: 30 mm - 300 mm (EN 823) Typical lambda : 0,033 - 0,039 W/mK (EN 13164) Fire classification: F (SFS-EN 13501-1) |
| Undertype | specific dataset | ||||
| LCA-metodologirapport | |||||
| Datakilder, behandling og repræsentativitet | |||||
| Dokumentation af forvaltning af datakvalitet | |||||
| Datakilde(r) anvendt(e) til dette datasæt | |||||
| Fuldstændighed | |||||
| Validering | |||||
| |||||
| Erklæringer om overholdelse | |||||
| Overholdelse |
Navn på system til overholdelse af reglerne
EN 15804+A2
|
Godkendelse af den overordnede overholdelse
Fully compliant |
Overholdelse af nomenklaturen
Fully compliant |
Overholdelse af metoderne
Fully compliant |
Overholdelse af kravene
Fully compliant |
Dokumentation for overholdelse af reglerne
Fully compliant |
Overholdelse af kvalitet
Fully compliant |
| Overholdelse |
Navn på system til overholdelse af reglerne
|
Godkendelse af den overordnede overholdelse
Fully compliant |
Overholdelse af nomenklaturen
Fully compliant |
Overholdelse af metoderne
Fully compliant |
Overholdelse af kravene
Fully compliant |
Dokumentation for overholdelse af reglerne
Fully compliant |
Overholdelse af kvalitet
Fully compliant |
| Overholdelse |
Navn på system til overholdelse af reglerne
|
Godkendelse af den overordnede overholdelse
Fully compliant |
Overholdelse af nomenklaturen
Fully compliant |
Overholdelse af metoderne
Fully compliant |
Overholdelse af kravene
Fully compliant |
Dokumentation for overholdelse af reglerne
Fully compliant |
Overholdelse af kvalitet
Fully compliant |
| Datagenerator | |
| Datasætgenerator/modellering |
|
| Indtastning af data af | |
| Tidsstempel (sidst gemt) | 2024-11-15T13:21:23 |
| Datasætformat(er) | |
| Offentliggørelse og ejerskab | |
| UUID | f797d1f8-ba6d-461d-91f5-06ee906c99d9 |
| Dato for sidste revision | 2024-08-23T11:42:40.3476078Z |
| Version af datasæt | 00.06.001 |
| Registreringsmyndighed | |
| Registreringsnummer | NEPD-6666-5916-EN |
| Ejer af datasættet | |
| Copyright | Ja |
| Type af licens | Free of charge for all users and uses |
| Begrænsninger i adgang og anvendelse | None |
Indikatorer for livscyklus