Process Data set: Hurdal Connect 600 (en)

Process Data set: Hurdal Connect 600 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Hurdal Connect 600
Technical purpose of product or process	Hurdal Connect is a version of Hurdal which comes complete with driver and integrated SG Connect sensor. The sensor switches the light on when it detects motion and switches off after a pre-selected period of time to save energy. The sensor also includes an integrated daylight sensor. If this function is activated, the sensor will constantly work to provide the desired amount of light in its work area. The lighting control is easy to configure using the SG Connect Commissioning App, and the luminaire can be used individually or as part of a larger system, which can easily be enlarged or reconfigured as needed. System Wattage: 12.0 W. Luminous flux: 1590lm lm. Efficacy: 133 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Connect. Luminiare class: Class I. Housing: Steel. Optics: UV-stabilized polycarbonate. Height: 76.0mm. Length: 600.0 mm. Width: 72.0 mm. EAN: 7021981131265. The EPD also covers the following products: EAN: 7021981131586 - HURDAL CONNECT 600 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Hurdal Connect 600 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.152862383906 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-17
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/113126/703345/specification_113126.pdf Link to CE Declaration: https://www.sg-as.com/file/techfile/9WE7/Hurdal%20Connect.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14082-14420_Hurdal-Connect-600.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-18T17:38:35
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	ed2825f1-0cd5-4824-bde3-07a3f4f0e176
Date of last revision	2025-11-14T15:15:22.5635592Z
Data set version	00.02.003
Registration authority	EPD Norway
Registration number	NEPD-14082-14420
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	26.85	0.004479	0.3398	0.09571	0.001214	1962	0.01147	0.06116	0.05576	-2.966
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.905	0	0	0	-3.773	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	30.73	0.004479	0.3398	0.09571	-3.772	1962	0.01147	0.06116	0.05576	-2.966
Use of non renewable primary energy (PENRE)	Input	MJ	228	0.3958	3.98	8.425	0.07376	151.7	1.013	0.4244	0.2129	-10.86
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	7.63	0	0	0	0	0	0	-8.398	0	0.0009834
Total use of non renewable primary energy resource (PENRT)	Input	MJ	235.5	0.3958	3.98	8.425	0.07376	151.7	1.013	-7.974	0.2129	-10.86
Use of secondary material (SM)	Input	kg	0.6066	0	0	0	0	0	0	0	0.001269	0.006826
Use of renewable secondary fuels (RSF)	Input	MJ	1.073	0.00008761	0.0001568	0.003092	0.00004027	1.541	0.0002243	0.0009213	0.0002546	0.0135
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.002	0.0007439	0.001886	0.01685	0.000166	3.839	0.001905	-0.00003448	0.01104	0.2727
Use of net fresh water (FW)	Input	m3	0.1979	0.00004425	0.001679	0.0007349	0.0000348	14.66	0.0001133	0.0006933	0.0001702	-0.009229
Hazardous waste disposed (HWD)	Output	kg	0.8402	0.00003576	0.0003412	0.0004277	0	0.09729	0.00009158	0.00001779	0.06356	-0.004332
Non hazardous waste dispose (NHWD)	Output	kg	21.05	0.019	0.05042	0.2671	0.3259	11.67	0.04865	0.0249	0.2739	-0.2674
Radioactive waste disposed (RWD)	Output	kg	0.000613	0.000002597	0.000006633	0.0000577	0	0.001357	0.000006651	9.386E-7	5.121E-7	-0.00002391
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02886	0	0.3031	0	0	0.4814	0.0000132	-0.0002671
Materials for energy recovery (MER)	Output	kg	0	0	0.002095	0	0.01578	0	0	0.1472	3.228E-7	-0.0000351
Exported electrical energy (EEE)	Output	MJ	0	0	0.003218	0	0.01864	0	0	0.2261	0.00002094	-0.00008606
Exported thermal energy (EET)	Output	MJ	0	0	0.04869	0	0.282	0	0	3.421	0.0003168	-0.001302

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	235.3	0.3957	3.98	8.425	0.07375	151.5	1.013	0.4243	0.2128	-10.86
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.007143	7.185E-7	0.00000103	0.00001156	1.283E-7	0.0008277	0.00000184	3.206E-7	9.705E-8	-0.000852
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1988	0.00008013	0.002271	0.008836	0.00002496	0.08673	0.0002052	0.0002267	0.00008388	-0.04313
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.4818	0.00001043	0.00006555	0.0002121	0.5198	0.3069	0.00002671	0.00008897	0.00001631	-0.001978
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	19.11	0.02679	0.442	0.5953	0.005272	11.1	0.06859	0.3874	0.03111	-0.9695
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	18.67	0.02681	0.4421	0.5956	0.5251	11.45	0.06864	0.3875	0.03124	-0.9732
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04358	0.000009793	0.00004783	0.0002929	0.000001744	0.04579	0.00002508	0.0001027	0.0001117	-0.001731
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	19.23	0.02681	0.4203	0.5956	0.005274	11.43	0.06864	0.3875	0.03124	-0.9604
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003119	2.513E-7	0.000008289	0.000003881	4.329E-8	0.0007983	6.434E-7	0.000001259	6.063E-7	-0.0002633
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02318	0.00001578	0.0005158	0.002122	0.000008257	0.009533	0.0000404	0.00006371	0.00003837	-0.002465
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.315	0.0001764	0.005684	0.02363	0.00008939	0.1241	0.0004517	0.000682	0.0002279	-0.03294
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.09861	0.00006606	0.002017	0.006406	0.0000257	0.03337	0.0001691	0.0001776	0.00009447	-0.01004
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000006605	5.823E-9	1.34E-8	1.311E-7	1.114E-9	7.611E-7	1.492E-8	3.137E-9	1.594E-9	-0.001563
Water (user) deprivation potential (WDP)	m3 world eqv.	250.4	0.1291	0.3237	5.443	0.09347	590.8	0.3304	4.162	1.455	0.3482

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.4	0.001645	0.0051	0.03645	0.0003156	2.749	0	0.004212	0.002101	0.0006432	-0.02762
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001175	1.732E-9	2.749E-8	2.185E-8	3.69E-10	6.218E-7	0	4.434E-9	1.367E-9	1.537E-9	-1.227E-7
Potential Soil quality index (SQP)²	unitless	69.5	0.2712	0.7896	4.147	0.04948	76.31	0	0.6943	0.09896	0.5496	-8.307
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00000108	3.13E-10	1.629E-8	4.327E-9	1.24E-10	7.762E-7	0	8.06E-10	3.769E-8	4.78E-10	-1.234E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.232E-8	0	1.18E-10	0	3E-12	3.295E-8	0	0	6.41E-10	5.9E-11	-3.854E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2006	0.3208	10.33	5.792	0.09836	690.3	0	0.8215	1.412	77.56	-330.7