Close Go back Collapse all sections
Process Data set: Protan SE 1.5 Roof Waterproofing Membrane (en) en

Key Data Set Information
Location NO
Geographical representativeness description European countries using BROOF(t1) fire classification according to EN 13501-5
Reference year 2024
Name
Protan SE 1.5 Roof Waterproofing Membrane
Use advice for data set The producer is held accountable for the transport of its own waste material. The processing of waste material is to be included into the new material and/or product.
Technical purpose of product or process Protan SE1,5 is a high quality polyester reinforced thermoplastic waterproofing membrane with high tensile and tear strength. Protan SE 1,5 is used on exposed roof surfaces. The membrane can be mechanically fastened to the load bearing substrate or installed in a Protan vacuum roof system. The membrane can be used on roofs of all shapes and sizes – whether flat, sloped or curved. The membrane is used on warm/compact roof constructions as well as cold/ventilated constructions. Protan SE1,5 contains stabilizers, which makes the product resistant to high and low temperatures, UV-resistant and flame retardant.
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Roofing/membranes
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Each product type is manufactured on a specific machine at Protan and has its own measuring system for energy consumption. Therefore, allocation is not relevant for calculating energy consumption in A3. The environmental impact and resource consumption for primary production of recycled materials is allocated to the original product system. Processing and transportation of the material to the production site is allocated to the analysis in this EPD Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2029
Time representativeness description "2024-06-28" - "2029-06-28"
Technological representativeness
Technology description including background system Weight: 1750 g/m² DoP315-SE15-E https://www.sintefcertification.no/no/product/index/3546/1071-cpr-1142

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 Installation
A5
 Transport
C2
 Waste processing
C3
Input
  • 4.819
  • 0.2014
  • 3.675
  • 0.01104
  • 0.2971
  • 0.05521
  • 0.1024
Input
  • 0.08315
  • 0.005668
  • 0.000003519
  • 0
  • 0.0007132
  • 0
  • 0
Input
  • 4.903
  • 0.2071
  • 3.675
  • 0.01104
  • 0.2978
  • 0.05521
  • 0.1024
Input
  • 68.28
  • 1.296
  • 0.46
  • 0.6386
  • 0.2106
  • 3.193
  • 0.639
Input
  • 43.13
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 111.4
  • 1.296
  • 0.46
  • 0.6386
  • 0.2106
  • 3.193
  • 0.639
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.07536
  • 0.001618
  • 0.000198
  • 0.0001501
  • 0.0002724
  • 0.0007504
  • 0.0002257
Output
  • 0.001161
  • 0.000001365
  • 5.677E-7
  • 3.255E-7
  • 1.929E-7
  • 0.000001628
  • 0.000002296
Output
  • 1.718
  • 0.06805
  • 0.03418
  • 0.05858
  • 0.03862
  • 0.2929
  • 0.009588
Output
  • 3.757E-8
  • 0
  • 0
  • 0.000004487
  • 0
  • 0.00002244
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0.1738
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0.2014
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
 Installation
A5
 Transport
C2
 Waste processing
C3
  • 96.86
  • 1.247
  • 0.3274
  • 0.6194
  • 0.1951
  • 3.097
  • 0.4647
  • 0.00001298
  • 2.267E-7
  • 4.409E-7
  • 7.823E-8
  • 6.41E-8
  • 3.911E-7
  • 5.953E-8
  • 0.01441
  • 0.0003324
  • 0.000155
  • 0.00009615
  • 0.00009427
  • 0.0004808
  • 0.0001292
  • 4.197
  • 0.08493
  • 0.03751
  • 0.03766
  • 0.04388
  • 0.1883
  • 0.04151
  • 0.01066
  • 0.00007911
  • 0.0000319
  • 0.00001328
  • 0.0001346
  • 0.00006638
  • 0.0001954
  • 0.001645
  • 0.00001745
  • 0.00000775
  • 0.000005805
  • 0.00001165
  • 0.00002902
  • 0.000003513
  • 0.000001749
  • 1.421E-9
  • 3.287E-9
  • 7.875E-9
  • 2.16E-9
  • 3.938E-8
  • 1.932E-9