| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | For ventilating buildings, offices and production facilities, for extracting air from kitchens and for extracting aggressive gases or vapours. For more information see: https://www.trox-xfans.de/en/roof-ventilation-fans/drvf-h-9c5db39ef611125c Vertical discharge. Motor encapsulated and externally ventilated for direct motor drive. Max. flow rate 120 °C. Base plate made of sendzimir-galvanised sheet steel with deep-drawn inlet nozzle. Housing made of aluminium, pressed for dimensional stability. Radial impeller, single inlet, made of sheet steel with polyester resin-based powder coating, dynamically balanced to DIN ISO 1940, quality level Q 6.3. Motor as IEC standard motor, type V1, arranged outside the air flow. Motor electrically wired to the externally mounted repair switch in accordance with VDE 0113 and VBG 4. This EPD includes the environmental data of the product series DRVF-H. The following represents a representative dataset of the most sold variant in the declared sales year (DRVF-H 500/30-6). |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-01-19" - "2029-01-19" |
| Technological representativeness | |
| Technology description including background system | Nominal sizes 250 - 700. Motor sizes 90 to 200. Volume flows up to 54,360 m³/h. Pressure difference up to 2300 Pa. Ventilation up to 120 °C continuous temperature. Also with frequency inverter. For more information see: https://www.trox-xfans.de/en/roof-ventilation-fans/drvf-h-9c5db39ef611125c |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-09-19T20:24:43 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | e758661a-a7c2-4ea1-ae97-77b8a9564983 |
| Date of last revision | 2024-01-17T10:38:08.4048562Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-5849-5127 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle