Close Go back Collapse all sections
Process Data set: Flügger Flutex Pro 10™ (en) en

Key Data Set Information
Location NO
Geographical representativeness description Scandinavia and Europe
Reference year 2021
Name
Flügger Flutex Pro 10™
Technical purpose of product or process Flutex Pro 10 is a waterbased, 100% acrylic wall paint for indoor use. The paint gives a matt surface with visible gloss, uniform finish and an even structure. Flutex Pro 10 is recommended for premises with high functional requirements, where the surface is exposed to dirt and wear and tear. Withstands cleaning, including spot cleaning with soft brush, water and cloth. Flutex Pro 10 is ecolabelled with the Nordic Swan and EU Ecolabel. For information on Green Building Standard credits and Ecolabels, see "Additional Information" on page 4. Life cycle analysis carried out for the white variant, which is estimated to have the greatest environmental impact.
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Paint
General comment on data set The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided by the manufacturer and represents the production of the declared product. Production site data was collected in 2020 from January 1st to October 31st, and extrapolated to cover the entire year. Remaining data is based on Ecoinvent v3.6, but adjusted to improve representativeness. All energy consumption in the database is assumed not to be used as raw material. The allocation is made in accordance with the provisions of NS-EN 15804. Incoming energy, water and waste production in-house is primarily allocated equally among all products through volume allocation. The recycling process and transportation of the material is allocated to this analysis. All major raw materials and essential energy is included. The production process for raw materials and energy flows with very small amounts (<1%), such as consumables in production and administration and employee travel, are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2026
Time representativeness description "08.02.2021" - "08.02.2026"
Technological representativeness
Technology description including background system Density: 1,39 kg/l Solids by volume: 42,5% EU VOC limit value for product (Cat. A/a): 30 g/l Product VOC max. 10 g/l Nominal spreading rate: 8 m2/l Wet film thickness: 125 µm Dry film thickness: 53 µm The most representative and worst case formulation is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized plastic packaging and is reported in the A1 Phase. For information on technical data, application and use of the product, see the Technical Data Sheet and FDV (Forvaltning, Drift og Vedlikehold) for the declared product on www.flugger.no For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.flugger.no

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
Input
  • 1.8
  • 0.00872
  • 0.587
  • 0.0167
Input
  • 0
  • 0
  • 0.0133
  • 0
Input
  • 1.8
  • 0.00872
  • 0.6
  • 0.0167
Input
  • 15.6
  • 0.58
  • 1.41
  • 1.31
Input
  • 16.5
  • 0
  • 0
  • 0
Input
  • 32.1
  • 0.58
  • 1.41
  • 1.31
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0.263
  • 0.000114
  • 0.00135
  • 0.00027
Output
  • 0.000035
  • 0.00000148
  • 0.00000552
  • 0.0000032
Output
  • 0.581
  • 0.038
  • 0.166
  • 0.118
Output
  • 0.000157
  • 0.00000394
  • 0.00000561
  • 0.00000896
Output
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0.00688
  • 0
Output
  • 0
  • 0
  • 0.0000171
  • 0
Output
  • 0
  • 0
  • 0.00127
  • 0
Output
  • 0
  • 0
  • 0.0136
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
  • 29.1
  • 0.566
  • 1.12
  • 1.29
  • 0.00000565
  • 9.08E-7
  • 0.0000246
  • 0.00000149
  • 0.0116
  • 0.000136
  • 0.000992
  • 0.00021
  • 1.77
  • 0.0381
  • 0.113
  • 0.0803
  • 0.00139
  • 0.0000233
  • 0.000098
  • 0.0000282
  • 0.00102
  • 0.00000514
  • 0.0000484
  • 0.0000101
  • 1.68E-7
  • 6.92E-9
  • 7.28E-9
  • 1.58E-8