Close Go back Collapse all sections
Process Data set: CEM II/B-M (P-LL) Bascement Plus Slite (en) en

Key Data Set Information
Location SE
Geographical representativeness description Sweden (Europe)
Reference year 2026
Name
CEM II/B-M (P-LL) Bascement Plus Slite
Use advice for data set From raw material extraction to market
Technical purpose of product or process Bascement Plus is a Portland-composite cement for general purpose. The application of cement has a large variety. It is mainly used as a binder for concrete and mortar. The application in concrete is regulated in /EN 206/. According to this standard, general suitability is established for cement conforming to /EN 197-1/ CEM II/B-M (P-LL)
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Cement and lime
General comment on data set Data quality Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs in accordance with EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. For co-products, an economic allocation is carried out. Furthermore, the processing, when applicable, and transportation of the co-product are included in this analysis. Cut-off criteria All major raw materials and all the essential energy are included. The production processes for raw materials and energy flows with very small amounts (less than 1%) may not be included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 0.0 kg
  • Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until 2030
Time representativeness description 2025 - 2030-06-23
Technological representativeness
Technology description including background system More information at https://www.cement.heidelbergmaterials.se/sv/bascement-plus

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
Transport
A4
Input
  • 231.9
  • 2.815
Input
  • 0
  • 0
Input
  • 231.9
  • 2.815
Input
  • 2827
  • 213.4
Input
  • 0.4412
  • 0
Input
  • 2827
  • 213.4
Input
  • 19.13
  • 0
Input
  • 595.4
  • 0.01186
Input
  • 811
  • 0.0753
Input
  • 1.008
  • 0.02456
Output
  • 12.43
  • 0.2266
Output
  • 235.5
  • 4.58
Output
  • 0.02232
  • 0.0004565
Output
  • 0
  • 0
Output
  • 0.6185
  • 0
Output
  • 5.73E-10
  • 0
Output
  • 0.00001472
  • 0
Output
  • 0.00001398
  • 0

IndicatorUnit Production
A1-A3
Transport
A4
Abiotic depletion potential - fossil resources (ADPF)
  • 2827
  • 213.4
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.1104
  • 0.00004864
Acidification potential, Accumulated Exceedance (AP)
  • 1.008
  • 0.1604
Global Warming Potential - biogenic (GWP-biogenic)
  • 0.5964
  • 0.007632
Global Warming Potential - fossil fuels (GWP-fossil)
  • 474.9
  • 14.85
Global Warming Potential - total (GWP-total)
  • 475.6
  • 14.87
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.07403
  • 0.005767
  • 475.4
  • 14.87
Eutrophication potential - freshwater (EP-freshwater)
  • 0.04732
  • 0.0007352
Eutrophication potential - marine (EP-marine)
  • 0.3236
  • 0.03687
Eutrophication potential - terrestrial (EP-terrestrial)
  • 3.705
  • 0.4121
Photochemical Ozone Creation Potential (POCP)
  • 0.9819
  • 0.1312
Depletion potential of the stratospheric ozone layer (ODP)
  • 8.651E-7
  • 0.000001079
Water (user) deprivation potential (WDP)
  • 24.47
  • 13.72

IndicatorUnit Production
A1-A3
Transport
A4
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 104.9
  • 0.4401
Potential incidence of disease due to PM emissions (PM) 2
  • 0.000005999
  • 0.000001
Potential Soil quality index (SQP) 2
  • 1.42E+3
  • 163.7
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 0.00000117
  • 1E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 1.87E-8
  • 0
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 365.7
  • 48.46