Process Data set: AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL (en)

Process Data set: AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Sweden
Reference year	2025
Name	AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL
Technical purpose of product or process	Totally water sealed three core power cable designed for installation in air, direct in ground and in water (with limited depth and moderate currents). Included in the E Path concept, the cable is evaluated and designed with sustainability in mind. The outer sheath is of 90% recycled (post-consumer scrap) and as insulation system the cable uses Prysmians premium thermoplastic material: P-laser that ensure outstanding performance and recyclability. Radially water sealed byan aluminium laminate bonded to the outer sheath and longitudinally water sealed with swellable tapes.The screen is made up of circular corrosion protected aluminium wires that are covered with a semi-conductive material. By using the two strong ripcords stripping of the jacket becomes easier and safer for both man and cable. Conductor design Stranded, round, compacted aluminum class 2, longitudinal water sealed Conductor material Aluminium Inner semi-conducting layer Yes Core insulation material Polypropylene Outer semi-conducting layer Yes Screen construction Aluminum wire Material outer sheath MDPE Laminated sheath Yes Longitudinal water blocking screen Yes Rip cord Yes UV resistant Yes
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Sverige AB
Quantitative reference
Reference flow(s)	AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.67500000054 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-11-30 - 2030-11-30
Publication date	2025-11-30
Technological representativeness
Technology description including background system	AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL SAP code: 20496468 STANDARDS, CERTIFICATIONS AND APPROVALS: SS 424 14 20 Construction standard 12-36 kV CENELEC HD 620 Part 12 Section M Harmonized construction and testing standard IEC 60228 Construction standard

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12567-12706_-AMALJ-TT-E-Path-3x400-50-ALCL-12kV-lcAL.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-30T21:18:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	dcb7e746-2f27-4119-892f-fbd49ba16248
Date of last revision	2025-10-06T14:04:23.8875435Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12567-12706
Owner of data set	Prysmian Group Sverige AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	242	0.161	12.87	0.1291	5.118	0.2332	0.07722	0.01098	0.06532	-105.4
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	22.66	0	0	0	-22.21	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	264.7	0.161	12.87	0.1291	-17.09	0.2332	0.07722	0.01098	0.06532	-105.4
Use of non renewable primary energy (PENRE)	Input	MJ	224.7	12.36	27.43	10.26	6.193	0.4862	5.472	0.2477	0.6764	-263.3
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	87.66	0	0	0	0.09653	0	0	-82.84	0	-5.38
Total use of non renewable primary energy resource (PENRT)	Input	MJ	312.4	12.36	27.43	10.26	6.29	0.4862	5.472	-82.59	0.6764	-268.6
Use of secondary material (SM)	Input	kg	0.8436	0	0	0	0.01688	0	0	0	0.0002019	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.1687	0.00555	0.05096	0.004516	0.005024	0.0009038	0.002764	0.0002565	0.001402	-0.0491
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1651	0.02111	0.1609	0.01514	0.01214	0.002855	0.009866	0	0.04066	-0.6446
Use of net fresh water (FW)	Input	m3	1.285	0.001333	0.02998	0.001168	0.02683	0.0005297	0.0005762	0.001477	0.0008012	-0.5221
Hazardous waste disposed (HWD)	Output	kg	0.1263	0.0006573	0.1273	0.0005615	0.01255	0.00002538	0.0002791	0	0.3725	0.08401
Non hazardous waste dispose (NHWD)	Output	kg	9.622	0.816	0.2031	0.8923	2.073	0.001602	0.2615	0	1.85	-5.871
Radioactive waste disposed (RWD)	Output	kg	0.001015	0.00008431	0.0004058	0.00007003	0.00003234	0.000007315	0.00003731	0	0.000004481	-0.001056
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.004934	0	0.05063	0	0	2.524	0.00005784	-0.00009137
Materials for energy recovery (MER)	Output	kg	0	0	0.5155	0	1.831	0	0	1.022	0.000006315	-0.0003957
Exported electrical energy (EEE)	Output	MJ	0	0	0.303	0	1.292	0	0	1.7	0.0001348	-0.000691
Exported thermal energy (EET)	Output	MJ	0	0	4.584	0	19.54	0	0	25.72	0.002039	-0.01045

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	261.7	12.36	27.37	10.26	6.93	0.4851	5.472	0.2476	0.6764	-268.2
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0001352	0.00001623	0.000009609	0.00001126	0.000004437	1.657E-7	0.000009829	1.69E-7	2.774E-7	0.00002644
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1796	0.005218	0.001951	0.002772	0.004224	0.00002696	0.001483	0.0004263	0.0002382	-0.1378
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-2.311	0.0003293	0.06333	0.0002707	2.421	0.00008414	0.000148	0.007647	0.00001811	-0.09369
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	23.05	0.8168	0.5466	0.6594	0.6121	0.00414	0.3629	2.635	0.1097	-20.47
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	20.9	0.8174	0.6248	0.6599	3.037	0.004493	0.3631	2.642	0.1097	-20.95
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1634	0.0002837	0.0148	0.0001925	0.003588	0.0002689	0.0001268	0.000006099	0.00001039	-0.3851
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	23.21	0.8173	0.6166	0.6599	0.6168	0.004487	0.3631	2.64	0.1107	-19.99
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0003474	0.000006183	0.00001681	0.000005029	0.000008166	2.799E-7	0.00000285	3.263E-7	6.277E-7	-0.0007911
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02121	0.001474	0.0004677	0.0008335	0.0006628	0.000004591	0.0004399	0.000204	0.0001578	-0.01768
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2324	0.01633	0.004606	0.009218	0.0072	0.00006044	0.004865	0.002147	0.0009209	-0.1945
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.07899	0.004814	0.00113	0.002964	0.002264	0.00001377	0.00149	0.0005164	0.0002745	-0.06561
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	5.198E-7	1.859E-7	1.221E-7	1.524E-7	2.923E-8	2.03E-9	8.272E-8	3.463E-9	8.333E-9	-0.01084
Water (user) deprivation potential (WDP)	m3 world eqv.	712.2	9.894	2705	7.869	69.95	49.23	5.22	1.241	12.01	-1.15E+4

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.2791	0.0539	0.9162	0.04483	0.02851	0	0	0	0	0	0.01663	0	0	0.02392	0.0005361	0.003885	-1.126
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.488E-7	6.195E-8	1.514E-8	5.805E-8	2.708E-8	0	0	0	0	0	1.94E-10	0	0	2.612E-8	1.859E-9	3.874E-9	-0.000001481
Potential Soil quality index (SQP)²	unitless	155	11.2	12.35	11.77	4.234	0	0	0	0	0	0.2148	0	0	3.772	0.03883	1.671	-16.7
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.272E-7	8.716E-9	1.285E-8	7.256E-9	8.774E-9	0	0	0	0	0	1.77E-10	0	0	4.354E-9	4.042E-9	1.301E-9	-6.029E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.817E-8	0	5.42E-10	0	8.49E-10	0	0	0	0	0	7E-12	0	0	0	9.7E-11	4.9E-11	-5.092E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	199.2	8.991	16.14	7.502	17.93	0	0	0	0	0	0.256	0	0	4.03	2.456	625.9	-315