Close Go back Collapse all sections
Process Data set: Jotun Siloxane Acrylic Primer, Jotun U.A.E. Ltd. (L.L.C.), Markets: U.A.E., Qatar, Kuwait and Bahrain (en) en

Key Data Set Information
Location AE
Geographical representativeness description Markets: U.A.E., Qatar, Kuwait and Bahrain
Reference year 2025
Name
Jotun Siloxane Acrylic Primer, Jotun U.A.E. Ltd. (L.L.C.), Markets: U.A.E., Qatar, Kuwait and Bahrain
Use advice for data set The flowchart in the figure below illustrates the system boundaries for the analysis, in accordance with the modular principle of EN 15804. The analysis is a cradle-to-gate (A1 - A3) study, with option A4 transport to market.
Technical purpose of product or process Jotun Siloxane Acrylic Primer is a clear coat based on a silane siloxane and an acrylic resin. This product penetrates and impregnates the host substrate to form a hydrophobic barrier which cures with the influence of atmospheric humidity and condenses to a tack free film. It acts repulsive to water. The declared product is ideal for protecting concrete surfaces. For information on Green Building Standard credits, see "Additional Information" on page 4. The material composition of the declared product is given below:
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Paint
General comment on data set Data quality: The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided by the manufacturer and represents the production of the declared product. Production site data was collected in 2015. Representative data from ecoinvent v3.2 was used for other processes. The data quality for the material input in A1 is presented in tabular form. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy, water and waste production in-house is primarily allocated equally among all products through mass allocation. Specific allocation was performed for certain waste flows according to information provided by the site manager. VOC emissions have been allocated entirely to the production of solvent based paints. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and essential energy is included. The production process for raw materials and energy flows with very small amounts (less than 0.1 % dry matter) are not included. In total, more than 99% of the material input is included. These cut-off criteria do not apply for non-energy related emissions (such as wastes, hazardous materials and substances).
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2030
Time representativeness description 2025-03-04 - 2030-03-04
Technological representativeness
Technology description including background system Relative density: 0.84 g/cm³ Solids by volume: 11 ± 2 volume% Theoretical spreading rate: 10 - 8 m²/l The most representative and worst case formulation produced at the manufacturing site is chosen for this EPD. For products with a selection of colours, this will be the formulation with the highest content of titanium dioxide. The product packaging is based on an average sized metal packaging, including secondary packaging such as pallets and plastic wrapping. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.jotun.com. For information on technical data, application and use of the product, see the Technical Data Sheet for the declared product on www.jotun.com.

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
Input
  • 3.177
Input
  • 0.6134
Input
  • 3.79
Input
  • 66.71
Input
  • 0
Input
  • 66.71
Input
  • 0
Input
  • 0
Input
  • 0
Input
  • 0.1154
Output
  • 0.00001855
Output
  • 1.331
Output
  • 0
Output
  • 0
Output
  • 0.001389
Output
  • 0.003473
Output
  • 0
Output
  • 0

IndicatorUnit Production
A1-A3
  • 65.02
  • 0.0000202
  • 0.0115
  • 2.05
  • 0.001993
  • 0.001859
  • 8.232E-7