soda4LCA

Process Data set: 4X240 PEX-M-AL 1KV DGREY (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Denmark
Reference year	2023
Name	4X240 PEX-M-AL 1KV DGREY
Technical purpose of product or process	For fixed installation, indoors and outdoors, in the ground, in concrete and in water. Installation of the product should only be carried out by personnel trained and qualified for electrical works. The product is designed according to recognized standards. Applicable rules of installation must be applied at all times. 1. Aluminium conductor 2. XLPE insulation 3. Bedding 4. PE sheath
Classification	Class name : Hierarchy level EPDNorge: Construction / Electrical cables and wires
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	NKT headquarter Denmark A/S
Quantitative reference
Reference flow(s)	4X240 PEX-M-AL 1KV DGREY - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2028
Time representativeness description	"2023-12-21" - "2028-12-21"
Publication date	12-21-2023
Technological representativeness
Technology description including background system	Norm (standard): HD 603-5B Rated voltage Uo/U: 0,6/1 kV Test voltage: 4 (AC) kV Maximal short-circuit temperature: 250 °C Maximal operating conductor temperature: 90 °C Temperature range: from -35 up to +90 °C Minimal temperature for laying and manipulation: -15 °C Minimal storage temperature: -35 °C Self-extinguishing of one cable: no CPR-Classification (reaction on fire): Fca UV stability: Yes Max. permitted pulling force: 30 N/mm2 Minimal radius of bend: 10 * D mm RoHS: Yes REACH: Yes CE Conformity: Yes LVD Conformity: Yes

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-5625-4918_4X240-PEX-M-AL-1KV-DGREY.pdf

Original EPDs

NEPD-5625-4918_4X240-PEX-M-AL-1KV-DGREY.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T18:11:23
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	cc9ea79c-2ad0-4cc9-9fc1-1f987858f958
Date of last revision	2023-12-15T08:11:06.7374879Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-5625-4918-EN
Owner of data set	NKT headquarter Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	125.6	0.0348	9.311	0.02363	2.706	0.6521	0.03545	0.002526	0.03942	-62.84
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	125.6	0.0348	9.311	0.02363	2.706	0.6521	0.03545	0.002526	0.03942	-62.84
Use of non renewable primary energy (PENRE)	Input	MJ	454.8	3.463	4.955	1.651	9.568	0.7595	2.477	0.08594	0.3532	-156.5
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	38.84	0	0	0	0.03711	0	0	-36.99	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	493.7	3.463	4.955	1.651	9.605	0.7595	2.477	-36.91	0.3532	-156.5
Use of secondary material (SM)	Input	kg	0.3756	0	0	0	0.007587	0	0	0	0.003749	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.6424	0.001111	0.001445	0.0008455	0.013	0.02452	0.001268	0.00007119	0.0008191	-0.02413
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1217	0.003917	0.01183	0.003023	0.002941	0.0001298	0.004535	0	0.001718	-0.305
Use of net fresh water (FW)	Input	m3	0.7393	0.0002624	0.003652	0.0001766	0.01489	0.00242	0.0002648	0.0002427	0.0004536	-0.3153
Hazardous waste disposed (HWD)	Output	kg	0.2863	0.0001593	0.01228	0.00008515	0.006804	0.0001004	0.0001277	0	0.04078	0.05149
Non hazardous waste dispose (NHWD)	Output	kg	8.799	0.0807	0.03104	0.08029	0.2065	0.004635	0.1204	0	1.195	-3.578
Radioactive waste disposed (RWD)	Output	kg	0.00172	0.00002388	0.000005592	0.00001125	0.00003647	0.000002392	0.00001687	0	0.000002421	-0.0006411
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0001372	0	0.03461	0	0	1.73	0.00004597	0
Materials for energy recovery (MER)	Output	kg	0	0	0.05239	0	0.008739	0	0	0.4355	0.0000946	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.03104	0	0.01759	0	0	0.8445	0.0008934	0
Exported thermal energy (EET)	Output	MJ	0	0	0.4696	0	0.2662	0	0	12.78	0.01352	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	492	3.463	4.955	1.651	10.31	0.7593	2.476	0.08593	0.3532	-156.5
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0008116	0.000003917	0.00000728	0.000003016	0.00001668	5.216E-7	0.000004524	4.598E-8	1.186E-7	0.00001805
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2487	0.005041	0.0006827	0.0003138	0.00541	0.0002349	0.0004707	0.0001645	0.0001193	-0.0834
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.3301	0.00008244	0.006137	0.00004519	0.006736	0.000607	0.00006779	0.00001062	0.000004881	-0.05634
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	36.45	0.2519	0.3484	0.1092	0.7891	0.05857	0.1638	1.314	0.06123	-12.3
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	37.25	0.2521	0.3546	0.1093	0.8053	0.05925	0.1639	1.314	0.06124	-12.59
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.4705	0.000134	0.00004235	0.00003886	0.009422	0.00007886	0.00005829	0.00000156	0.000005242	-0.2348
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	37.18	0.2521	0.3483	0.1093	0.8036	0.08194	0.1639	1.314	0.06341	-12.02
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001564	0.000001415	0.000002397	8.723E-7	0.00003146	0.000004794	0.000001309	1.007E-7	2.492E-7	-0.0004793
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.03266	0.001225	0.0002062	0.00006209	0.000764	0.0000395	0.00009314	0.00007897	0.00009433	-0.01064
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3608	0.01362	0.00211	0.0006945	0.008432	0.0005639	0.001042	0.0008542	0.0004781	-0.1171
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1172	0.003615	0.0006593	0.000266	0.002669	0.0001202	0.0003991	0.0002045	0.000146	-0.03936
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000002805	5.533E-8	4.382E-8	2.473E-8	6.202E-8	1.992E-9	3.71E-8	1.007E-9	4.425E-9	-0.005397
Water (user) deprivation potential (WDP)	m3 world eqv.	1.453E+4	1.893	1.571	1.597	290.9	11.8	2.395	0.1946	7.287	-7.02E+3

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.814	0.01499	0.004053	0.007216	0.0376	0	0	0	0	0	0.003713	0	0	0.01082	0.0001453	0.002166	-0.6831
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002346	9.506E-9	8.641E-9	6.685E-9	4.797E-8	0	0	0	0	0	1.151E-9	0	0	1.003E-8	6.44E-10	2.146E-9	-8.91E-7
Potential Soil quality index (SQP)²	unitless	74.17	1.343	0.2704	1.155	1.606	0	0	0	0	0	1.248	0	0	1.732	0.01043	0.8251	-8.411
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001156	2.319E-9	3.159E-9	1.337E-9	2.342E-8	0	0	0	0	0	8.84E-10	0	0	2.005E-9	1.101E-9	4.73E-10	-3.661E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.427E-8	0	2.41E-10	0	1.492E-9	0	0	0	0	0	2.7E-11	0	0	0	2.9E-11	2.3E-11	-3.106E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	826.1	2.253	2.049	1.224	25.93	0	0	0	0	0	1.351	0	0	1.836	0.2566	459.1	-190.3