Process information
| Key Data Set Information | |
| Location | CH |
| Geographical representativeness description | Europe |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The life cycle assessment is a “cradle-to-grave” analysis, and the system boundaries are defined according to EN 50693, as required by EPDItaly007. For transparency reasons, the manufacturing stage is further divided into an upstream and core stage. |
| Technical purpose of product or process | This Environmental Product Declaration is a “specific product EPD”, and the declared product is the MSC 600 including the related packaging. General technical information of the MSC 600 module are presented below. Description Unit MSC 600 Voltage range AC VAC 85 - 305 Voltage range DC VDC 120 - 430 Frequency range Hz 47 - 440 The MSC 600 is manufactured by an ABB supplier located in Italy. The storage of MSC600 takes places in ABB Dalmine site. ? ISO 9001:2015 – Quality Management Systems ? ISO 45001:2018 – Occupational Health and Safety Management Systems The constituent materials of the MSC 600 are presented below. Type Material Weight [kg] Weight % Capacitors Surface Mounting Capacitor 0.002 0.57% Film Type Capacitor 0.020 6.63% Electrolyte Capacitor 0.001 0.25% Diodes Auxilary Diode 0.002 0.77% Surface Mounting Diode 0.000 0.02% Light Emitting Diode 0.000 0.05% Integrated circuits Integrated Circuit - Logic type 0.002 0.61% Integrated Circuit - Memory type 0.001 0.17% Active - Passive components Electric Active Component 0.049 15.85% Electric Passive Component 0.022 7.05% Others Electronics Surface Mount Resistor 0.000 0.11% Toggle switch 0.000 0.04% Low value multilayer chip inductor 0.000 0.13% Surface Mount Transistor 0.000 0.01% Peripheral Connector 0.014 4.41% Metals Copper 0.088 28.85% Plastics Glass Reinforced Polycarbonate 0.083 27.17% Other plastics 0.022 7.29% Total 0.306 100.00% |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Both primary and secondary data are used. The main sources for primary data are the bill of materials (BOM), technical drawings, and site-specific foreground data provided by ABB. For all processes for which primary data are not available, generic background data originating from the ecoinvent v3.9.1 database, with system model “allocation, cut-off by classification”, are used. The LCA software used for the calculations is SimaPro 9.5. The utility consumption and waste generation by ABB, in the core manufacturing stage, is allocated to the production of one reference product according to applicable rules. For the end-of-life allocation, the “Polluter Pays” principle is adopted according to what is defined in the CEN/TR 16970 standard. However, the potential benefits and avoided loads from recovery and recycling processes are not considered because it is not required by the PCR EPDItaly007 “Electronic and electrical products and systems”. According to PCR EPDItaly007 “Electronic and electrical products and systems”, the cutoff criteria can be set to a maximum of 2% of the overall environmental impacts. In this LCA, components like stickers, glue and grease have been excluded as their weights are negligible. The same applies to packaging, where small parts such as sticking labels are even smaller fraction of the total mass. Burnishing, oiling, black oxide, and phosphate surface treatments have also been excluded due to the low amount of surface involved. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-07-02 - 2030-07-02 |
| Technological representativeness | |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-01T01:32:02 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | cb80f8b2-df5d-4636-bfa5-16e3bc0c2d70 |
| Date of last revision | 2025-07-02T08:10:29.2707376Z |
| Data set version | 00.06.000 |
| Registration authority | |
| Registration number | NEPD-9393-8991 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle