Process Data set: Ecoline 1200 D/I (en)

Process Data set: Ecoline 1200 D/I (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Ecoline 1200 D/I
Technical purpose of product or process	EcoLine D/I is a slim and stylish suspended luminaire that is designed for quick and easy installation. Direct light with three layer optical system for glare-free light (UGR<19), combined with indirect light with a wide beam angle, gives an efficient light perfectly suited for offices, schools and public buildings. Solid luminaire housing made from powder-coated steel. Optional integrated emergency light upon request. System Wattage: 32.0 W. Luminous flux: 4650lm lm. Efficacy: 145 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L90/B10>100,000, L96>50,000. Light distribution: Direct/Indirect. Control/Dimming: On/Off. Luminiare class: Class I. Housing: Sheet steel. Optics: Acrylic (PMMA). Height: 58.0mm. Length: 1235.0 mm. Width: 166.0 mm. EAN: 7021982128127 The EPD also covers the following products: EAN: 7021982128134 - ECOLINE 1200 D/I WHITE 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Ecoline 1200 D/I - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.502990041968 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-07-31 - 2030-07-31
Publication date	2025-07-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/ecoline-1200-di/212812/pdf/specification_212812.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703435_Ecoline%201200%20DI/50/703435_Ecoline%201200%20DI.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11925-11894_Ecoline-1200-D-I.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-05T15:00:41
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	c4e7a3fc-b581-4b48-a598-d8e4cce19719
Date of last revision	2025-07-30T07:30:13.3564233Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11925-11894
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	61.73	0.02663	1.459	0.4108	0.004047	5003	0.04923	0.1149	0.1302	-7.311
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.488	0	0	0	-6.487	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	68.22	0.02663	1.459	0.4108	-6.483	5003	0.04923	0.1149	0.1302	-7.311
Use of non renewable primary energy (PENRE)	Input	MJ	458.1	2.353	17.08	36.17	0.2458	386.9	4.35	0.7767	0.5764	-35.16
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	9.899	0	0	0	0	0	0	-10.84	0	0.0004917
Total use of non renewable primary energy resource (PENRT)	Input	MJ	468	2.353	17.08	36.17	0.2458	386.9	4.35	-10.07	0.5764	-35.16
Use of secondary material (SM)	Input	kg	2.35	0	0	0	0	0	0	0	0.002321	0.02445
Use of renewable secondary fuels (RSF)	Input	MJ	0.4203	0.0005209	0.0006731	0.01327	0.0001342	3.929	0.0009629	0.001827	0.001049	0.08552
Use of non renewable secondary fuels (NRSF)	Input	MJ	6.649	0.004423	0.008094	0.07232	0.0005533	9.788	0.008176	-0.00004511	0.02016	2.311
Use of net fresh water (FW)	Input	m3	0.3905	0.0002631	0.007209	0.003154	0.000116	37.37	0.0004864	0.001037	0.0005578	-0.02765
Hazardous waste disposed (HWD)	Output	kg	0.2338	0.0002126	0.001464	0.001836	0	0.248	0.0003931	0.00002424	0.1399	-0.01446
Non hazardous waste dispose (NHWD)	Output	kg	7.857	0.113	0.2164	1.146	1.086	29.76	0.2088	0.03499	1.046	-1.257
Radioactive waste disposed (RWD)	Output	kg	0.00113	0.00001544	0.00002847	0.0002477	0	0.003459	0.00002855	0.000001344	0.000002251	-0.00004639
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.1239	0	1.01	0	0	3.258	0.00001575	-0.0009569
Materials for energy recovery (MER)	Output	kg	0	0	0.008991	0	0.001134	0	0	0.1762	3.853E-7	-0.000126
Exported electrical energy (EEE)	Output	MJ	0	0	0.01381	0	0.06213	0	0	0.2704	0.000025	-0.0003086
Exported thermal energy (EET)	Output	MJ	0	0	0.209	0	0.9399	0	0	4.09	0.0003782	-0.004669

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	463.6	2.353	17.08	36.16	0.2458	386.3	4.35	0.7764	0.5761	-35.17
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01671	0.000004272	0.000004419	0.00004962	4.277E-7	0.00211	0.000007897	4.787E-7	2.392E-7	-0.001156
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.396	0.0004764	0.009747	0.03793	0.00008321	0.2211	0.0008807	0.0003759	0.0002163	-0.07889
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.607	0.00006201	0.0002814	0.0009104	1.842	0.7823	0.0001146	0.001105	0.0004763	-0.005715
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	38.79	0.1593	1.897	2.555	0.01757	28.3	0.2944	0.4852	0.05529	-3.568
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	37.26	0.1594	1.898	2.557	1.859	29.2	0.2946	0.4865	0.05597	-3.584
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.07151	0.00005823	0.0002053	0.001257	0.000005811	0.1167	0.0001076	0.0001958	0.0002077	-0.01062
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	39.08	0.1594	1.804	2.557	0.01758	29.14	0.2946	0.4862	0.05597	-3.521
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004933	0.000001494	0.00003558	0.00001666	1.443E-7	0.002035	0.000002762	0.000002557	0.000001266	-0.0005542
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04582	0.0000938	0.002214	0.00911	0.00002752	0.0243	0.0001734	0.00009423	0.00008233	-0.005902
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.8475	0.001049	0.0244	0.1014	0.0002979	0.3163	0.001939	0.00102	0.0006711	-0.07317
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1644	0.0003928	0.008658	0.0275	0.00008564	0.08507	0.0007261	0.0002679	0.0002425	-0.02551
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000273	3.462E-8	5.754E-8	5.628E-7	3.711E-9	0.00000194	6.402E-8	4.867E-9	5.151E-9	-0.002124
Water (user) deprivation potential (WDP)	m3 world eqv.	1056	0.7673	1.39	23.37	0.3115	1506	1.418	6.597	7.879	-123.7

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.405	0.00978	0.02189	0.1565	0.001052	7.008	0	0.01808	0.003845	0.00247	-0.0509
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002957	1.029E-8	1.18E-7	9.378E-8	1.228E-9	0.000001585	0	1.903E-8	2.387E-9	3.879E-9	-3.646E-7
Potential Soil quality index (SQP)²	unitless	134.1	1.612	3.389	17.8	0.1649	194.5	0	2.98	0.1625	1.285	-13.44
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002421	1.86E-9	6.992E-8	1.857E-8	4.12E-10	0.000001979	0	3.461E-9	5.287E-8	1.171E-9	-1.22E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.157E-7	0	5.05E-10	0	9E-12	8.4E-8	0	0	8.95E-10	1.25E-10	-1.665E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2676	1.908	44.35	24.86	0.3278	1.76E+3	0	3.526	2.094	531	-647.8