| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | Roof fan conveying smoke gases of temperature classes F400 and F600. Vertical outlet, with direct drive due to three-phase current IEC standard motor Encased against volume flow rate and separately ventilated through a motor cooling air system Casing made of corrosion-resistant aluminium Smoke extraction roof fan type BVD 500/30 -6 . For conveying smoke gases of temperature class 600. With DoP / BVD - F600 / 005, in accordance with EN 12101-T3. Vertical discharge, with direct drive by three-phase IEC motor standard motor, type V1, ISO class H, encapsulated against the volume flow, externally ventilated by a motor-cooling air system. Electrically wired with an external terminal box. Base plate made of galvanised sheet steel with deep-drawn inlet nozzle, fixing studs for direct flange-mounting of additional components. Housing made of corrosion-resistant aluminium, radial impeller, single inlet, made of sheet steel, dynamically balanced in accordance with DIN ISO 1940, quality class G 6.3, surface protection with polyester resin-based powder coating. Depending on the insulation class in conjunction with the TROX X-FANS frequency inverter, also infinitely variable in the event of smoke extraction. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-01-19" - "2029-01-19" |
| Technological representativeness | |
| Technology description including background system | 6 sizes More than 100 types Volume flow rate V max. 54,360 m3/h Total pressure increase p1 max. 2,300 Pa Powder coating possible in all RAL colours Corrosion protection category up to C5 With deflector hood SL1000 |
| Subtype | representative dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-06-09T15:35:14 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | c3c0bf33-31f0-47e0-917f-2a737d220aa0 |
| Date of last revision | 2024-01-17T12:18:19.3131752Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-5846-5133-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle