Process information
| Key Data Set Information | |
| Location | FR |
| Geographical representativeness description | Norway |
| Reference year | 2025 |
| Name |
|
| Technical purpose of product or process | ÖLFLEX CLASSIC 110 cables are VDE approved control cables for occasional flexible use and fixed installation for medium mechanical load conditions. They are also suitable for use in dry, damp or wet areas. If using outdoors, observe the indicated temperature range and use with UV protection. They are largely resistant to acids, alkalis and certain oils at room temperature. ÖLFLEX CLASSIC 110 cables are limited suitable for free and continuously recurring movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted. Application range: As connecting cable for control systems in machine tools, plant engineering and construction, industrial machinery, conveyor systems, production and assembly lines as well as in measuring and control technology and data processing systems. This cable is suitable for torsion application in wind turbines. The torsional load is limited to applications, which are typical for the loop in wind turbine generators (WTG). Design Design based on EN 50525-2-51 Certification VDE-REG 7030 limited to following dimension range: 0.5 mm² - 2.5 mm² 2 - 65 cores 4 mm² - 16 mm² 2 - 7 cores 25 mm² - 120 mm² 2 - 5 cores EN 13501-6 and EN 50575 Classification of fire behaviour (article/dimension range see www.lappkabel.com/cpr) Conductor Fine wire strands of bare copper, acc. to IEC 60228 resp. EN IEC 60228, Class 5 Insulation PVC compound TI2 acc. to EN 50363-3 with increased requirements acc. to Lapp specification Core identification code acc. to VDE 0293-1, with or without GN/YE ground conductor black cores with white numbers acc. to EN 50334 Cable assembly Cores are stranded in layers Outer sheath PVC compound TM2 acc. to EN 50363-4-1 with increased requirements acc. to LAPP specification colour: Silver Grey, similar RAL 7001 |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-07-28 - 2030-07-28 |
| Technological representativeness | |
| Technology description including background system | Electrical properties at 20 °C Nominal voltage U0/U: 300/500V Test voltage core / core: 4000 V AC Mechanical and thermal properties Minimum bending radius Occasional flexing: 10 x outer diameter Fixed installation: 4 x outer diameter Temperature range Occasional flexing: - 15°C up to +70°C max. conductor temp. Fixed installation: - 40°C up to +80°C max. conductor temp. Bending cycles and power chain Power Chain Operation parameters Limited to 2-7 cores and 0.5 – 2.5 mm² Min. bending radius: 15 x outer diameter temperature range: -5 °C up to +70 °C max. conductor temp. Travelling distance up to 5 m: 0.2 … 1 million bending cycles Torsional stress in WTG: TW-0 (5000 cycles at = +5°C) TW-1 (2000 cycles at = -20°C) ± 150°/m at 1 revolution per minute Flammability Flame retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2 Oil resistance acc. to EN 50290-2-22 TM54 Tests acc. to IEC 60811 resp. EN 60811, EN 50395, EN 50396 General requirements These cables are conform to the EU-Directive 2014/35/EU (Low Voltage Directive). A part of these cables (see www.lappkabel.com/cpr) are classified in accordance with the EU-Regulation no. 305/2011 (CPR). Environmental information These cables meet the substance-specific requirements of the EU Directive 2011/65/EU (RoHS). |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-08-26T20:59:04 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | b823be6a-b681-4e9e-a184-c551ff344337 |
| Date of last revision | 2025-07-28T08:07:05.5995009Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-11907-11872 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle