Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Nordic & Baltic countries |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The approach is “cradle to gate” (A1–A3) with modules A4–A5, C1–C4 and D. The production process starts from raw materials, that are purchased from external and intercompany suppliers and stored in the plant. Bulk raw materials are stored in specific silos and added automatically in the production mixer, according to the formula of the product. Other raw materials, supplied in bags, big bags or tanks, are stored in the warehouse and added automatically or manually in the mixer. The production is a discontinuous process, in which all the components are mechanically mixed in batches. The semi-finished product is then packaged, put on wooden pallets and stored in the finished products warehouse. The quality of final products is controlled before the sale. |
| Technical purpose of product or process | Redirep 25 RSF is a dry mortar for repair of concrete substrates. It has very good bonding properties. The mortar has rapid setting times and low shrinkage. Redirep 25 RSF consists of special cement and well graded dry sand, together with additives to improve workability and adhesive bonding. Redirep 25 RSF contains no components, neither in the sand nor cement, which can cause alkali-aggregate reactions. Redirep 25 RSF is supplied in 25 kg bags. For more information see the TDS (Technical Data Sheet) on Mapei AS website (www.mapei.com/no). |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-08-22 - 2030-08-22 |
| Technological representativeness | |
| Technology description including background system | For all types of repair work on concrete substrates. Redirep 25 RSF is particularly suitable where there is a need to minimize crack development and/or where surfaces need to be finished quickly. Redirep 25 RSF meets the requirements defined by EN 1504-9 (“Products and systems for protection and repair of concrete structures - Definitions and requirements, quality control and evaluation of conformity. General principles for the use of products and systems”). And the minimum requirements claimed by 1504-3 (“Structural and non-structural repair”) for mortars of class R2. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-10-10T11:54:45 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | b64c5b96-29fc-4c5a-8840-cfb6730f5ad9 |
| Date of last revision | 2025-08-20T14:34:28.9775035Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-9020-9020-1 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle