Process Data set: FLEXRÖR16/FQ Pure 3G1,5mm² (en)

Process Data set: FLEXRÖR16/FQ Pure 3G1,5mm² (en) en

Process information

Key Data Set Information
Location	NL
Geographical representativeness description	Sweden
Reference year	2024
Name	FLEXRÖR16/FQ Pure 3G1,5mm²
Technical purpose of product or process	Flex pipes in halogen-free PP (Polypropylene) with Draka’s quality cable FQ Pure, which is part of Prysmian Group’s Eco Cable concept that helps our customers in their environmental work. To reduce the product’s carbon footprint, the cable consists of 36% recycled copper. The cable meets CPR class Dca s2d2a1. Approved for casting, stiffness class 750 N and with impact resistance up to 2 kg. UV and ozone resistant, which provides a long service life. The cable inside is like Draka’s other high-quality cables and is easy to work with. Conductor material Copper Conductor surface Bare Core insulation material Low smoke zero halogen polymer Tube material Halogen-free PP Twisted cores Yes
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Sverige AB
Quantitative reference
Reference flow(s)	FLEXRÖR16/FQ Pure 3G1,5mm² - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-05-31" - "2029-05-31"
Publication date	2024-05-31
Technological representativeness
Technology description including background system	FLEXRÖR 16/FQ Pure 3G1,5mm² SAP code: 20434619 External article code: 1419820 SS-EN 50525-3-31 Construction standard Reaction-to-fire class (acc. EN 13501-6) Dca Smoke development class (acc. EN 13501-6) s2 Euro class flaming droplets/particles (acc. EN 13501-6) d2 Euro class acidity (acc. EN 13501-6) a1

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-6753-6072

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-10-31T11:59:52
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	b482be06-7630-4de0-9ad5-4ec46939faea
Date of last revision	2024-05-29T06:29:18.8292118Z
Data set version	00.03.001
Registration authority	EPD Norway
Registration number	NEPD-6753-6072
Owner of data set	Prysmian Group Sverige AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.5218	0.0006351	0.07071	0.00296	0.01197	12.66	0.00118	0.0003228	0.001063	-0.4771
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.5218	0.0006351	0.07071	0.00296	0.01197	12.66	0.00118	0.0003228	0.001063	-0.4771
Use of non renewable primary energy (PENRE)	Input	MJ	4.331	0.05037	0.4365	0.2352	0.1031	26.39	0.08363	0.007313	0.01261	-0.653
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.944	0	0	0	0.0004211	0	0	-1.923	0	-0.308
Total use of non renewable primary energy resource (PENRT)	Input	MJ	6.275	0.05037	0.4365	0.2352	0.1035	26.39	0.08363	-1.915	0.01261	-0.961
Use of secondary material (SM)	Input	kg	0.01436	0	0	0	0.0002888	0	0	0	0.00008004	0.006433
Use of renewable secondary fuels (RSF)	Input	MJ	0.005008	0.00002222	0.005129	0.0001035	0.0002067	0.04906	0.00004224	0.000007544	0.0000221	0.00001703
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0008668	0.00007456	0.001278	0.000347	0.00005598	0.155	0.0001508	0	0.00008171	-0.0218
Use of net fresh water (FW)	Input	m3	0.01031	0.00000573	0.0003719	0.00002678	0.0002157	0.02875	0.000008806	0.00004289	0.00001595	-0.001201
Hazardous waste disposed (HWD)	Output	kg	0.001934	0.000002755	0.001508	0.00001287	0.0000907	0.001378	0.000004265	0	0.001073	-0.000263
Non hazardous waste dispose (NHWD)	Output	kg	0.05718	0.004354	0.002563	0.02046	0.002719	0.08697	0.003997	0	0.04738	-0.01264
Radioactive waste disposed (RWD)	Output	kg	0.000009085	3.439E-7	0.000002654	0.000001605	2.869E-7	0.000397	5.702E-7	0	8.5E-8	-8.36E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0001349	0	0.0006544	0	0	0.03258	0.00000297	-0.000257
Materials for energy recovery (MER)	Output	kg	0	0	6.465E-8	0	0.0006303	0	0	0.03151	0.000002006	-0.0000558
Exported electrical energy (EEE)	Output	MJ	0	0	0.003452	0	0.001074	0	0	0.05021	0.00002168	-0.0001208
Exported thermal energy (EET)	Output	MJ	0	0	0.05222	0	0.01624	0	0	0.7597	0.0003281	-0.001827

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	6.136	0.05037	0.4359	0.2351	0.1392	26.33	0.08362	0.007313	0.01261	-0.9346
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0000421	5.578E-8	1.354E-7	2.582E-7	8.541E-7	0.000008994	1.502E-7	4.971E-9	4.238E-9	-0.00002089
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.01438	0.00001361	0.0001087	0.00006355	0.0002922	0.001463	0.00002267	0.00001255	0.000004264	-0.003793
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.001721	0.000001329	0.0007925	0.000006205	0.00005049	0.004567	0.000002261	0.000001035	3.381E-7	-0.0001955
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.2887	0.003239	0.02523	0.01512	0.008397	0.2247	0.005546	0.07814	0.003852	-0.04504
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.2907	0.003242	0.02606	0.01513	0.008454	0.2439	0.00555	0.07814	0.003852	-0.04541
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0002658	9.485E-7	0.0000414	0.000004414	0.000006296	0.01459	0.000001939	1.795E-7	1.609E-7	-0.0001795
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.2844	0.003242	0.0266	0.01513	0.008339	0.2436	0.00555	0.07813	0.003933	-0.03245
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0001215	2.471E-8	0.000001893	1.153E-7	0.000002471	0.00001519	4.355E-8	9.711E-9	7.671E-9	-0.00002554
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0006266	0.000004092	0.00001608	0.00001911	0.00001368	0.0002492	0.000006723	0.000006002	0.000005265	-0.0001743
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.00897	0.00004526	0.0001817	0.0002113	0.0001913	0.003281	0.00007435	0.00006319	0.00001701	-0.002599
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.002775	0.00001454	0.0000474	0.00006795	0.00005898	0.0007473	0.00002276	0.00001522	0.000005595	-0.0007312
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	1.481E-8	7.49E-10	2.167E-9	3.493E-9	4.55E-10	1.102E-7	1.264E-9	1.01E-10	1.63E-10	-0.0003209
Water (user) deprivation potential (WDP)	m3 world eqv.	9.317	0.03877	5.47	0.1804	0.3064	2672	0.07977	0.03649	0.1958	-0.1317

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.01046	0.0002201	0.003216	0.001028	0.0003075	0.9028	0	0.0003655	0.00001582	0.00007041	-0.0009785
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.195E-8	2.84E-10	3.11E-10	1.331E-9	6.88E-10	1.054E-8	0	3.99E-10	5.7E-11	8E-11	-1.014E-8
Potential Soil quality index (SQP)²	unitless	2.241	0.05746	0.09269	0.2697	0.05514	11.66	0	0.05765	0.001147	0.03703	-0.8695
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.94E-7	3.5E-11	2.83E-10	1.66E-10	3.894E-9	9.624E-9	0	6.7E-11	1.18E-10	1.4E-11	-4.152E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.353E-9	0	8E-12	0	4.7E-11	4E-10	0	0	3E-12	0	-4.89E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	116.1	0.03684	0.2781	0.172	2.524	13.9	0	0.06159	0.07109	9.504	-34.39