Process Data set: IBF 2-lags betonbelægning - IBF Horsens (en)

Process Data set: IBF 2-lags betonbelægning - IBF Horsens (en) da

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Danmark
Reference year	2024
Name	IBF 2-lags betonbelægning - IBF Horsens
Use advice for data set	Denne EPD er specifik for produktion af 2-lags betonfliser fra IBF Horsens.
Technical purpose of product or process	7 cm 2-lags belægning med bagbeton og 4 mm toplag baseret på grå cement uden tilsat farvepigment, produceret på blokstensmaskine af IBF Horsens. Betonfliser og belægningssten produceres iht. produktstandarderne EN 1338 og EN 1338, og efterlever standardernes krav til geometri, styrke og holdbarhed, herunder frost/tø-bestandighed. Prøvningsmetoder og -frekvenser fremgår af produktstandarderne.
Classification	Class name : Hierarchy level EPDNorge: Construction / Concrete goods
General comment on data set	Datakvalitet: Specifikke data for produktsammensætningen er fremskaffet af producenten. De repræsenterer productionen af det deklarerede produkt og blev indsamlet til udarbejdelsen af denne EPDen i det angivne studieår Baggrundsdata er baseret på EPDer iht. til EN 15804, og forskellige LCA databaser Datakvaliteten for råmaterialerne i A1 er præsenteret i tabellen under. Baggrundsdata for delmaterialer i betonen er beregnet ud fra recepter benyttet i løbet af 2022. Den enkelte recept er vægtet ud fra antal af hverdage i perioden, den er benyttet. Forbrug af hjælpestoffer, energiforbrug og affaldsmængder er indsamlet for 2022 fra virksomhedens IT system og dialog med leverandører. Allokering: Allokering er foretaget iht. bestemmelser i EN 15804. Indgående energi og vand, samt produktion af affald i egen produktion er allokeret lige mellem alle produkterne gennem masseallokering. Miljøpåvirkninger og ressourceforbrug for primærproduktion af recirkulerede materialer er allokeret til det oprindelige produktsystem. Fase A1 og A2 er allokeret direkte til det givne produkt. For fase A3 er foretaget masseallokering mellem alle producerede produkter på lokationen. Cut-off kriterier: Alle vigtige råmaterialer og alle vigtige energiforbrug er inkluderet. Produktionsprocesser for råmaterialer og energistrømme som indgår med meget små mængder (mindre end 1%) kan udelades iht. EN 15804. Disse cutoff kriterier gælder ikke for farlige materialer og stoffer.
Copyright	Yes
Owner of data set	A/S Ikast Betonvarefabrik
Quantitative reference
Reference flow(s)	IBF 2-lags betonbelægning - IBF Horsens - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.199883654961 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-01-03 - 2029-01-03
Publication date	2024-01-03
Technological representativeness
Technology description including background system	Produkter efterlever DS/EN 1338, Belægningssten af beton – Krav og prøvningsmetoder eller DS/EN 1339, Betonfliser – Krav og prøvningsmetoder.

Modelling and validation

Subtype

specific dataset

LCA methodology report

NS-EN 16757:2022 for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

NS-EN 16757:2022 for Concrete and concrete elements

Data source(s) used for this data set

NEPD-5705-4992_IBF-2-lags-betonbel-gning---IBF-Horsens.pdf

Original EPDs

NEPD-5705-4992_IBF-2-lags-betonbel-gning---IBF-Horsens.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Alexander Borg

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-08T16:02:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	b05298cb-e58d-4cc3-ad0b-874a6575e896
Date of last revision	2024-04-17T13:27:13.0511935Z
Data set version	00.06.000
Registration authority	EPD Norway
Registration number	NEPD-5705-4992-DK
Owner of data set	A/S Ikast Betonvarefabrik
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	12.7	0.282	5.336	0.1857	0.048	0.0714	1.757	0.01102	-1.404
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.712	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	19.42	0.282	5.336	0.1857	0.048	0.0714	1.757	0.01102	-1.404
Use of non renewable primary energy (PENRE)	Input	MJ	63.49	22.29	9.599	14.76	8.811	5.672	3.415	0.7163	-6.329
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.277	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	64.76	22.29	9.599	14.76	8.811	5.672	3.415	0.7163	-6.329
Use of secondary material (SM)	Input	kg	9.705	0	0.001188	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.03263	0.009878	0.1962	0.006494	0	0.002497	0	0.0002278	-0.02871
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.04013	0.03325	0.007691	0.02177	0	0.008371	0	0.000655	-0.0295
Use of net fresh water (FW)	Input	m3	0.1363	0.002525	0.01964	0.00168	0.0004535	0.0006459	0.005849	0.0008532	-0.2203
Hazardous waste disposed (HWD)	Output	kg	0.4484	0.001215	0.003	0.0008075	0.0002594	0.0003105	0.000341	0	-0.001445
Non hazardous waste dispose (NHWD)	Output	kg	9.655	1.89	0.1048	1.283	0.01043	0.4934	0.01077	5.184	-0.04384
Radioactive waste disposed (RWD)	Output	kg	0.000236	0.0001522	0.00004262	0.0001008	0.00006119	0.00003872	0.0000361	0	-0.00004756
Components for re-use (CRU)	Output	kg	0.466	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.09815	0	5.103	0	0	0	154.8	0	0
Materials for energy recovery (MER)	Output	kg	0.0502	0	0.00001468	0	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.03274	0	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.4954	0	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Use B1	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	64.63	22.29	9.592	14.76	0	8.811	5.672	3.414	0.7163	-5.996
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0001074	0.00002525	0.000006517	0.00001619	0	9.824E-7	0.000006227	0.000001395	1.965E-7	-0.00003147
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.04846	0.004961	0.00398	0.002926	0	0.006698	0.001533	0.0008898	0.0002166	-0.00319
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.6725	0.0005884	-0.00269	0.0003892	0	0.00012	0.0001497	0.0009496	0.00001888	-0.007071
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	16.93	1.393	0.7208	0.9086	-2.6	0.64	0.3646	0.1099	0.0222	-0.3544
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	16.25	1.394	0.723	0.9093	-2.6	0.64	0.3649	0.1115	0.02222	-0.3617
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.002329	0.0004237	0.004909	0.0002768	0	0.00005046	0.0001065	0.0001521	0.000004354	-0.0002396
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	16.94	1.394	0.9134	0.9093	-2.6	0.64	0.3649	0.1101	0.02222	-0.3792
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0002655	0.00001095	0.00004037	0.00000723	0	0.000002331	0.000002781	0.000006947	1.657E-7	-0.000009421
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.007761	0.001232	0.001236	0.0006407	0	0.002956	0.0004609	0.0002608	0.00008124	-0.001107
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.08975	0.01369	0.01418	0.007146	0	0.032	0.005097	0.003004	0.0008951	-0.013
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.02863	0.004914	0.003606	0.002806	0	0.008919	0.001639	0.0008043	0.0002561	-0.003432
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	3.419E-7	3.313E-7	6.988E-8	2.191E-7	0	1.382E-7	8.426E-8	2.167E-8	1.081E-8	-6.456E-8
Water (user) deprivation potential (WDP)	m3 world eqv.	287.5	17.29	95.66	11.32	0	1.872	4.351	376.8	1.508	-281.2

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.1747	0.09743	0.04435	0.0645	0	0	0	0	0	0	0	0.0384	0.02479	0.05728	0.003109	-0.05503
Potential incidence of disease due to PM emissions (PM)²	disease incidence	5.396E-7	1.249E-7	6.074E-8	8.346E-8	0	0	0	0	0	0	0	8.106E-7	3.21E-8	1.424E-8	4.614E-9	-6.796E-8
Potential Soil quality index (SQP)²	unitless	20.3	25	13.12	16.92	0	0	0	0	0	0	0	1.07	6.507	1.931	2.611	13.61
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.693E-8	1.585E-8	9.508E-9	1.043E-8	0	0	0	0	0	0	0	4.48E-9	4.013E-9	2.167E-9	2.07E-10	-7.586E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.239E-8	0	2.97E-10	0	0	0	0	0	0	0	0	1.6E-10	0	1.55E-10	1E-11	-3.1E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	190.8	16.3	12.95	10.79	0	0	0	0	0	0	0	4.816	4.148	2.42	0.3543	-6.173