Process Data set: Wax 14/23W (en) - EPD Global Digi Node

Process Data set: Wax 14/23W (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Wax 14/23W
Technical purpose of product or process	Wax is a luminaire designed by Christian Hvidt. It is a spot LED luminaire with an IP66 rating. The base and top are made of die-cast aluminium, and the front is made of tempered glass. The frame is available in light grey or black and is treated for outdoor use. Direct optics with several solutions. Complete with LED driver for operation of LED light sources mounted to component rail. Pre-mounted with connecting cable (10 m). Wattage: 14/23W. Voltage: 220-240V. Max. luminaires per circuit breaker: B10: 10, B16: 17, C10: 16, C16: 27. Luminous flux: 1450/2420lm. Efficacy: 89/90lm/W. Colour temperature: 3000K. Colour rendering (CRI): Ra>80. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000. Control/Dimming type: On/Off. Luminaire class: Class II. Contains light source of energy class: D. Breeam: Fulfils Hea 01 for flicker free lighting. Height (mm): 268. Diameter (mm): 180. EAN: 5703821173131. The EPD also cover the following product: EAN: 5703821172776 - Wax Grey 27° 1450/2420lm 3000K Ra>80 On/Off Please note that the above calculation is based on the Norwegian energy mix and assumes that the luminaire operates at 23W. If you require an EPD for a different energy mix or wattage, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Wax 14/23W - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.155089098544 kg
Time representativeness
Data set valid until	2030
Publication date	0001-01-03
Technological representativeness
Technology description including background system	Link to the CE declaration on our website: https://www.sg-as.com/int/en/file/techfile/MXXX/Wax.pdf Link to product data on our website: https://www.sg-as.com/int/en/products/outdoor/post/wax/wax-flood-27-black-18-32w-ra-80-ip65-3000k

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14144-14456_Wax-14-23W.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-19T13:04:06
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	aff927eb-c775-494f-92a7-c704e59ea58d
Date of last revision	2025-11-18T14:45:15.7525574Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-14144-14456
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	87.75	0.09728	33.91	0.3195	0.001437	7.98E+3	0.05325	0.4277	0.1166	-12.88
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	5.323	0	0	0	-5.323	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	93.07	0.09728	33.91	0.3195	-5.321	7.98E+3	0.05325	0.4277	0.1166	-12.88
Use of non renewable primary energy (PENRE)	Input	MJ	542.6	10.86	37.63	22.32	0.08331	617	3.72	3.119	0.6564	-37.06
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	15.11	0	0	0	-0.9768	0	0	-15.79	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	557.7	10.86	37.63	22.32	-0.8935	617	3.72	-12.67	0.6564	-37.06
Use of secondary material (SM)	Input	kg	2.134	0	0	0	0	0	0	0	0.001492	0.1168
Use of renewable secondary fuels (RSF)	Input	MJ	0.4319	0.002899	0.92	0.01143	0.00004636	6.267	0.001905	0.009462	0.001344	0.01158
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.04173	0.02337	0.6649	0.04087	0.0001836	15.61	0.006812	-0.00006986	0.01401	-0.1074
Use of net fresh water (FW)	Input	m3	0.5124	0.0007396	0.09999	0.002387	0.00003973	59.6	0.0003978	0.003046	0.000747	-0.05799
Hazardous waste disposed (HWD)	Output	kg	0.3548	0.0004907	0.0342	0.001151	0	0.3956	0.0001919	0.00003447	0.1105	-0.004084
Non hazardous waste dispose (NHWD)	Output	kg	8.417	0.1725	1.963	1.085	0.3579	47.46	0.1809	0.1555	1.52	-0.8128
Radioactive waste disposed (RWD)	Output	kg	0.0015	0.00007507	0.0001032	0.000152	0	0.005517	0.00002534	0.000001712	0.000003047	-0.0001239
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	1.916	0	0.3233	0	0	2.599	0.00002995	-0.004569
Materials for energy recovery (MER)	Output	kg	0	0	0.1673	0	0.0003441	0	0	0.4429	7.325E-7	-0.0006016
Exported electrical energy (EEE)	Output	MJ	0	0	0.1089	0	0.01916	0	0	0.5131	0.00004752	-0.001474
Exported thermal energy (EET)	Output	MJ	0	0	1.648	0	0.2898	0	0	7.763	0.0007189	-0.0223

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	556.8	10.86	37.62	22.32	0.0833	616.1	3.72	3.118	0.6562	-37.06
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01559	0.00001028	0.00002112	0.00004078	1.416E-7	0.003366	0.000006796	0.000001784	2.509E-7	-0.002116
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3689	0.02013	0.0103	0.004243	0.0000279	0.3527	0.0007071	0.001312	0.0002394	-0.15
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.279	0.0002523	0.127	0.000611	0.5687	1.248	0.0001018	0.001042	0.0000234	-0.0118
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	46.68	0.8114	2.856	1.476	0.007239	45.13	0.246	1.205	0.07811	-3.036
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	46.56	0.8116	2.99	1.477	0.5759	46.57	0.2462	1.207	0.07828	-3.076
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1527	0.0004902	0.007287	0.0005254	0.000001931	0.1862	0.00008757	0.0003939	0.0001381	-0.02786
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	47.1	0.8116	3.744	1.477	0.007241	46.48	0.2462	1.207	0.07828	-2.803
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003598	0.000004169	0.0001912	0.00001179	4.823E-8	0.003246	0.000001966	0.0000137	0.00000107	-0.0009103
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.05213	0.004918	0.001999	0.0008395	0.00001054	0.03876	0.0001399	0.0002919	0.0001128	-0.007885
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.6133	0.05474	0.02642	0.00939	0.00009991	0.5045	0.001565	0.003211	0.0008166	-0.1094
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1885	0.01436	0.006054	0.003597	0.00002905	0.1357	0.0005995	0.0008553	0.0002701	-0.03136
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000002803	1.753E-7	1.573E-7	3.344E-7	1.253E-9	0.000003095	5.573E-8	3.802E-8	6.799E-9	-0.003401
Water (user) deprivation potential (WDP)	m3 world eqv.	3088	4.608	444.3	21.59	0.1226	2402	3.598	15.94	11.26	-744

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.729	0.04683	0.1536	0.09756	0.0003582	11.18	0	0.01626	0.01428	0.003328	-0.1362
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000003075	1.288E-8	1.094E-7	9.037E-8	4.19E-10	0.000002528	0	1.506E-8	1.176E-8	4.1E-9	-4.056E-7
Potential Soil quality index (SQP)²	unitless	259.2	3.252	59.16	15.61	0.06396	310.3	0	2.602	0.7935	1.482	-23.81
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002387	2.576E-9	4.356E-8	1.808E-8	1.34E-10	0.000003156	0	3.012E-9	7.32E-8	1.31E-9	-9.403E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.002E-8	0	1.231E-9	0	3E-12	1.34E-7	0	0	1.468E-9	1.04E-10	-1.482E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2648	6.824	60.94	16.55	0.1082	2807	0	2.758	9.665	6.8E+2	-1161