Process Data set: Linus LED TW (en)

Process Data set: Linus LED TW (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Linus LED TW
Technical purpose of product or process	Linus is an energy-efficient wall luminaire that is particularly well suited to optimal lighting in corridors and similar. Improved visual comfort is achieved through prismatic optics, prismatic optics ensure optimal light control, the optics have a markedly higher operating efficiency compared to a T5 solution. Cost saving - no light source changes. Maintenance-friendly luminaire design. Wattage: 38W. Voltage: 220-240V. Max. luminaires per circuit breaker: B10: 11, B16: 17, C10:18, C16: 29. Luminous flux: 3550lm. Efficacy: 93 lm/W. Colour temperature: 2700-6500K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L90/B10>70,000. Light distribution: Direct/Indirect 97/3%. Control/Dimming type: Tunable White DALI Type 8. Luminaire class: Class I. Contains light source of energy class: D. Breeam: Fulfils Hea 01 for flicker free lighting. Housing: Sheet steel. Colour: White. Optics: Acrylic (PMMA). Length: 1170 mm. Width: 123 mm. Height: 90 mm. EAN: 5703821174657. Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Linus LED TW - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.16967592594 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-10-10 - 2030-10-10
Publication date	2025-10-10
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/130382_Linus%20TW/50/130382_Linus%20TW.pdf Link to product data on our website: https://www.sg-as.com/products/linus-tw/8246093404

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12218-12251_Linus-LED-TW.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-10T15:05:02
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	aa7c2f39-6da3-4f1e-96b6-46cfc5a78b91
Date of last revision	2025-08-29T10:46:17.2829417Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-12218-12251
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	66.08	0.03201	29.31	0.2762	0.001365	5516	0.04603	0.4328	0.1361	-16.47
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.005	0	0	0	-3.006	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	69.09	0.03201	29.31	0.2762	-3.004	5516	0.04603	0.4328	0.1361	-16.47
Use of non renewable primary energy (PENRE)	Input	MJ	521.2	2.237	32.53	19.3	0.08295	426.5	3.216	2.628	0.6104	-53.4
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	15.89	0	0	0	0	0	0	-17.61	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	537.1	2.237	32.53	19.3	0.08295	426.5	3.216	-14.98	0.6104	-53.4
Use of secondary material (SM)	Input	kg	1.954	0	0	0	0	0	0	0	0.002465	0.0111
Use of renewable secondary fuels (RSF)	Input	MJ	1.12	0.001145	0.7953	0.009882	0.00004529	4.332	0.001647	0.008801	0.001048	0.0134
Use of non renewable secondary fuels (NRSF)	Input	MJ	4.726	0.004097	0.5748	0.03533	0.0001867	10.79	0.005889	-0.00007748	0.02293	0.3757
Use of net fresh water (FW)	Input	m3	0.524	0.0002391	0.08644	0.002063	0.00003914	41.2	0.0003439	0.002792	0.0006212	-0.08139
Hazardous waste disposed (HWD)	Output	kg	0.2257	0.0001153	0.02957	0.0009951	0	0.2735	0.0001659	0.00003728	0.1397	0.00345
Non hazardous waste dispose (NHWD)	Output	kg	7.537	0.1087	1.697	0.9384	0.3665	32.81	0.1564	0.2267	0.9416	-1.181
Radioactive waste disposed (RWD)	Output	kg	0.001761	0.00001524	0.00008922	0.0001314	0	0.003814	0.00002191	0.000001884	0.000001901	-0.0001854
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	1.656	0	0.3409	0	0	2.449	0.00002004	-0.0004344
Materials for energy recovery (MER)	Output	kg	0	0	0.1447	0	0.02562	0	0	0.3996	4.901E-7	-0.0000572
Exported electrical energy (EEE)	Output	MJ	0	0	0.09416	0	0.02096	0	0	0.3434	0.00003179	-0.0001401
Exported thermal energy (EET)	Output	MJ	0	0	1.424	0	0.3171	0	0	5.195	0.000481	-0.00212

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	534.7	2.237	32.52	19.29	0.08294	425.9	3.216	2.627	0.6101	-53.39
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005564	0.000004084	0.00001825	0.00003525	1.443E-7	0.002326	0.000005875	0.000002051	2.557E-7	-0.001854
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2933	0.0004295	0.008907	0.003668	0.00002808	0.2438	0.0006113	0.001055	0.0002352	-0.1043
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3013	0.00006122	0.1098	0.0005282	0.6222	0.8625	0.00008803	0.001174	0.00002939	-0.01576
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	40.51	0.148	2.469	1.276	0.005929	31.2	0.2127	1.01	0.07408	-4.336
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	40.34	0.1481	2.585	1.277	0.6281	32.19	0.2128	1.012	0.07433	-4.403
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1271	0.00005271	0.0063	0.0004542	0.000001961	0.1287	0.0000757	0.0003212	0.0002208	-0.05192
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	40.93	0.1481	3.237	1.277	0.005931	32.13	0.2128	1.012	0.07432	-4.262
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00483	0.000001182	0.0001652	0.0000102	4.868E-8	0.002244	0.000001699	0.00001255	0.000001425	-0.0006068
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04288	0.0000852	0.001728	0.0007257	0.000009286	0.02679	0.0001209	0.0002394	0.00009012	-0.00698
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.4795	0.000953	0.02284	0.008117	0.0001005	0.3487	0.001353	0.002644	0.0007057	-0.0886
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1652	0.0003635	0.005233	0.003109	0.0000289	0.09379	0.0005182	0.0007193	0.000256	-0.02741
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003173	3.352E-8	1.36E-7	2.891E-7	1.252E-9	0.000002139	4.818E-8	5.121E-8	5.348E-9	-0.002194
Water (user) deprivation potential (WDP)	m3 world eqv.	3072	2.162	384.1	18.66	0.1051	1661	3.11	14.68	8.157	-1488

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.128	0.009777	0.1328	0.08433	0.0003549	7.726	0	0.01406	0.01228	0.002519	-0.2022
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002289	9.049E-9	9.457E-8	7.813E-8	4.14E-10	0.000001748	0	1.302E-8	1.185E-8	3.919E-9	-4.017E-7
Potential Soil quality index (SQP)²	unitless	170.4	1.564	51.14	13.5	0.05564	214.5	0	2.249	0.8665	1.454	-15.88
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002148	1.809E-9	3.766E-8	1.562E-8	1.39E-10	0.000002182	0	2.604E-9	7.84E-8	1.526E-9	-2.943E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.575E-8	0	1.062E-9	0	3E-12	9.261E-8	0	0	1.677E-9	1.4E-10	-1.248E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2272	1.658	52.68	14.3	0.1106	1.94E+3	0	2.384	10.65	418.7	-683.4