Process Data set: Tysnes 66 1500 Sensor Dim (en)

Process Data set: Tysnes 66 1500 Sensor Dim (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Tysnes 66 1500 Sensor Dim
Technical purpose of product or process	Tysnes 66 is a tri-proof luminaire for garages, storage rooms and production facilities. It has low power consumption, high lumen output and long lifetime.It can easily be mounted on ceilings with clips or suspended in wires. Sturdy steel clips attached to the luminaire holds the diffuser. It has cable entries in both ends and weakening for cabling from the back.Tysnes 66 comes in 3 lengths and has dip switches on the driver that allows setting the required light level. Also available as emergency light, with a 3-hour battery pack. System Wattage: 40.0 W. Luminous flux: 6400 lm. Efficacy: 160 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Sensor Dim. Luminiare class: Class I. Housing: UV-stabilized polycarbonate. Optics: UV-stabilized polycarbonate. Height: 80.0mm. Length: 1500.0 mm. Width: 85.0 mm. EAN: 7021981200466 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Tysnes 66 1500 Sensor Dim - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.377051013305 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-11 - 2030-06-11
Publication date	2025-06-11
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/tysnes/120046/pdf/specification_120046.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702865_Tysnes/50/702865_Tysnes%2066.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11346-11311_Tysnes-66-1500-Sensor-Dim.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-29T13:39:59
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a9383d17-847b-4222-a076-cef17883568d
Date of last revision	2025-06-10T06:41:14.5749129Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11346-11311
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	40.03	0.06093	0.7246	0.194	0.003033	1.371E+4	0.02325	0.1413	0.07444	-9.302
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	4.922	0	0	0	-4.879	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	44.94	0.06093	0.7246	0.194	-4.876	1.371E+4	0.02325	0.1413	0.07444	-9.302
Use of non renewable primary energy (PENRE)	Input	MJ	298.8	5.384	8.907	17.08	0.1843	1.06E+3	2.054	1.187	0.3574	-17.02
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	30.12	0	0	0	0	0	0	-31.45	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	328.8	5.384	8.907	17.08	0.1843	1.06E+3	2.054	-30.26	0.3574	-17.02
Use of secondary material (SM)	Input	kg	1.325	0	0	0	0	0	0	0	0.001625	0.0361
Use of renewable secondary fuels (RSF)	Input	MJ	0.3709	0.001192	0.000401	0.006268	0.0001006	10.76	0.0004548	0.002726	0.0003884	0.01274
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.8812	0.01012	0.004372	0.03416	0.0004148	26.81	0.003861	-0.00005736	0.01435	-0.127
Use of net fresh water (FW)	Input	m3	0.2544	0.000602	0.005554	0.00149	0.00008694	102.4	0.0002297	0.002294	0.0003227	-0.02169
Hazardous waste disposed (HWD)	Output	kg	0.389	0.0004865	0.0007422	0.0008671	0	0.6795	0.0001856	0.00002889	0.08082	-0.006438
Non hazardous waste dispose (NHWD)	Output	kg	9.901	0.2584	0.09265	0.5414	0.8142	81.53	0.09862	0.03967	0.7314	-0.3689
Radioactive waste disposed (RWD)	Output	kg	0.0007277	0.00003533	0.0000173	0.000117	0	0.009476	0.00001348	0.000001476	0.00000121	-0.00004571
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04577	0	0.7574	0	0	0.4326	0.00005364	-0.001413
Materials for energy recovery (MER)	Output	kg	0	0	0.004313	0	0.0009938	0	0	0.5986	0.000001312	-0.000186
Exported electrical energy (EEE)	Output	MJ	0	0	0.006627	0	0.04657	0	0	0.9193	0.00008511	-0.0004559
Exported thermal energy (EET)	Output	MJ	0	0	0.1003	0	0.7045	0	0	13.91	0.001288	-0.006897

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	328.6	5.384	8.907	17.08	0.1843	1058	2.054	1.187	0.3572	-17.02
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.007455	0.000009774	0.000002286	0.00002343	3.206E-7	0.005781	0.00000373	7.061E-7	1.523E-7	-0.001521
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2736	0.00109	0.00502	0.01791	0.00006237	0.6057	0.0004159	0.0007027	0.000136	-0.08359
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.238	0.0001419	0.0001521	0.00043	1.38	2.143	0.00005414	0.00118	0.0004746	-0.003577
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	26.61	0.3644	0.9802	1.207	0.01317	77.53	0.139	1.508	0.08626	-1.438
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	25.42	0.3647	0.9805	1.207	1.393	79.99	0.1391	1.51	0.08688	-1.446
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0391	0.0001332	0.0001068	0.0005937	0.000004356	0.3198	0.00005084	0.0002038	0.0001439	-0.004534
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	26.79	0.3646	0.9343	1.207	0.01318	79.83	0.1391	1.509	0.08897	-1.525
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003016	0.000003418	0.00001778	0.000007869	1.081E-7	0.005576	0.000001304	0.00000385	8.145E-7	-0.0005042
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.03019	0.0002146	0.00117	0.004303	0.00002063	0.06658	0.00008189	0.0002176	0.0001087	-0.004449
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3921	0.0024	0.01289	0.04791	0.0002233	0.8666	0.0009157	0.002304	0.0004053	-0.06115
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1152	0.0008986	0.004861	0.01299	0.00006419	0.2331	0.0003429	0.0005838	0.0001634	-0.01779
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001618	7.924E-8	3.604E-8	2.658E-7	2.781E-9	0.000005316	3.024E-8	8.132E-9	3.207E-9	-0.006171
Water (user) deprivation potential (WDP)	m3 world eqv.	513.9	1.756	0.8315	11.03	0.2335	4127	0.6699	8.744	2.408	-20.81

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.077	0.02238	0.01286	0.0739	0.0007884	19.2	0	0.008538	0.005358	0.001214	-0.05319
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001715	2.356E-8	5.889E-8	4.429E-8	9.2E-10	0.000004343	0	8.989E-9	4.11E-9	2.555E-9	-2.281E-7
Potential Soil quality index (SQP)²	unitless	102.9	3.689	1.733	8.407	0.1236	533	0	1.408	0.2425	1.045	-19.81
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001654	4.284E-9	4.277E-8	8.772E-9	3.08E-10	0.000005421	0	1.634E-9	6.261E-8	6.75E-10	-3.673E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.005E-8	0	2.7E-10	0	7E-12	2.301E-7	0	0	1.081E-9	7.7E-11	-6.449E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2245	4.364	22.18	11.74	0.2457	4821	0	1.665	4.622	80.9	-6.5E+2