Process Data set: Hurdal Connect 1200 (en)

Process Data set: Hurdal Connect 1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Hurdal Connect 1200
Technical purpose of product or process	Hurdal Connect is a version of Hurdal which comes complete with driver and integrated SG Connect sensor. The sensor switches the light on when it detects motion and switches off after a pre-selected period of time to save energy. The sensor also includes an integrated daylight sensor. If this function is activated, the sensor will constantly work to provide the desired amount of light in its work area. The lighting control is easy to configure using the SG Connect Commissioning App, and the luminaire can be used individually or as part of a larger system, which can easily be enlarged or reconfigured as needed. System Wattage: 24.0 W. Luminous flux: 3460lm lm. Efficacy: 144 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Connect. Luminiare class: Class I. Housing: Steel. Optics: UV-stabilized polycarbonate. Height: 76.0mm. Length: 1200.0 mm. Width: 72.0 mm. EAN: 7021981131272 The EPD also covers the following products: EAN: 7021981131593 - HURDAL CONNECT 1200 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Hurdal Connect 1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.246811545302 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-17
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/113127/703345/specification_113127.pdf Link to CE Declaration: https://www.sg-as.com/file/techfile/9WE7/Hurdal%20Connect.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14081-14421_Hurdal-Connect-1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-18T17:32:06
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a777d3a5-300b-4a6a-b999-ef5c3af824b2
Date of last revision	2025-11-14T15:16:32.6670103Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-14081-14421
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	47.01	0.008566	0.6189	0.1743	0.00196	3377	0.02089	0.1548	0.114	-6.316
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.737	0	0	0	-6.184	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	53.75	0.008566	0.6189	0.1743	-6.182	3377	0.02089	0.1548	0.114	-6.316
Use of non renewable primary energy (PENRE)	Input	MJ	409.6	0.7569	7.25	15.35	0.119	261.1	1.846	1.138	0.4313	-22.99
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	17.17	0	0	0	0	0	0	-18.94	0	0.0009834
Total use of non renewable primary energy resource (PENRT)	Input	MJ	426.7	0.7569	7.25	15.35	0.119	261.1	1.846	-17.8	0.4313	-22.99
Use of secondary material (SM)	Input	kg	1.047	0	0	0	0	0	0	0	0.002632	0.02174
Use of renewable secondary fuels (RSF)	Input	MJ	1.799	0.0001676	0.0002856	0.005632	0.000065	2.652	0.0004086	0.002607	0.0004934	0.02342
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.702	0.001423	0.003435	0.03069	0.000268	6.607	0.00347	-0.00007809	0.02292	0.4099
Use of net fresh water (FW)	Input	m3	0.358	0.00008464	0.003059	0.001339	0.00005617	25.22	0.0002064	0.001605	0.0003391	-0.02046
Hazardous waste disposed (HWD)	Output	kg	1.519	0.0000684	0.0006215	0.0007791	0	0.1674	0.0001668	0.00003994	0.1304	-0.008863
Non hazardous waste dispose (NHWD)	Output	kg	37.43	0.03633	0.09185	0.4865	0.526	20.09	0.08861	0.05553	0.5392	-0.5239
Radioactive waste disposed (RWD)	Output	kg	0.001075	0.000004967	0.00001208	0.0001051	0	0.002335	0.00001211	0.000002083	9.884E-7	-0.00005497
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.05256	0	0.4892	0	0	0.8271	0.00002829	-0.0008507
Materials for energy recovery (MER)	Output	kg	0	0	0.003816	0	0.02626	0	0	0.3154	6.919E-7	-0.0001119
Exported electrical energy (EEE)	Output	MJ	0	0	0.005862	0	0.03009	0	0	0.4846	0.00004489	-0.0002743
Exported thermal energy (EET)	Output	MJ	0	0	0.08869	0	0.4552	0	0	7.332	0.0006791	-0.004151

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	426.4	0.7569	7.25	15.35	0.119	260.7	1.846	1.138	0.4309	-22.99
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01025	0.000001374	0.000001875	0.00002106	2.071E-7	0.001424	0.000003351	7.621E-7	1.979E-7	-0.001961
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3484	0.0001533	0.004136	0.0161	0.00004029	0.1492	0.0003737	0.0005752	0.0001705	-0.09957
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.7861	0.00001995	0.0001194	0.0003863	0.837	0.5281	0.00004865	0.0002303	0.00002983	-0.004436
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	35.05	0.05123	0.8052	1.084	0.008509	19.1	0.1249	0.8488	0.06515	-2
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	34.34	0.05127	0.8054	1.085	0.8455	19.71	0.125	0.8493	0.06541	-2.008
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.07601	0.00001873	0.00008713	0.0005334	0.000002814	0.07879	0.00004568	0.0002473	0.0002315	-0.003735
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	35.26	0.05127	0.7657	1.085	0.008512	19.67	0.125	0.8492	0.06541	-1.968
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.005511	4.805E-7	0.0000151	0.00000707	6.986E-8	0.001374	0.000001172	0.000003639	0.000001249	-0.0005997
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04016	0.00003017	0.0009396	0.003866	0.00001333	0.0164	0.00007358	0.0001518	0.00007953	-0.005476
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5444	0.0003374	0.01035	0.04305	0.0001443	0.2135	0.0008228	0.001634	0.0004586	-0.07411
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1754	0.0001263	0.003674	0.01167	0.00004147	0.05742	0.0003081	0.0004271	0.0001922	-0.02215
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00003394	1.114E-8	2.442E-8	2.388E-7	1.797E-9	0.00000131	2.717E-8	7.56E-9	3.182E-9	-0.003288
Water (user) deprivation potential (WDP)	m3 world eqv.	454.3	0.2468	0.5897	9.915	0.1509	1017	0.6019	9.881	2.707	-9.15

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.45	0.003146	0.00929	0.0664	0.0005093	4.73	0	0.007672	0.00553	0.00126	-0.06361
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002088	3.31E-9	5.007E-8	3.98E-8	5.96E-10	0.00000107	0	8.077E-9	3.573E-9	3.128E-9	-2.641E-7
Potential Soil quality index (SQP)²	unitless	122.8	0.5186	1.438	7.554	0.07986	131.3	0	1.265	0.2515	1.127	-18.69
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002217	6E-10	2.967E-8	7.881E-9	2E-10	0.000001336	0	1.469E-9	8.411E-8	9.76E-10	-3.257E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.936E-8	0	2.15E-10	0	4E-12	5.67E-8	0	0	1.433E-9	1.22E-10	-7.975E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3343	0.6136	18.82	10.55	0.1587	1188	0	1.496	3.361	137	-761.3