Process Data set: Sense Pro 600x600 Pir (en)

Process Data set: Sense Pro 600x600 Pir (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Sense Pro 600x600 Pir
Technical purpose of product or process	The Sense Pro PIR comes complete with driver, PIR sensor, cable and plug. The PIR sensor is discreetly located at the edge of the frame. The light is activated by movement and turns off automatically after a predetermined period of time to provide good energy savings.The sensor does not detect movement through walls or doors.The PIR sensor also has an adjustable daylight sensor, so you can choose not to turn on lighting when there is sufficient daylight. Sense PIR can act as a master, controlling up to 3 other Sense panels (slaves).Sense Opalprism PIR can be mounted on ceilings with visible T-rails without accessories and on ceilings with concealed T-rails with accessories. System wattage: 35W. Luminous flux: 4610 lm. Efficiacy: 132 lm/w. Colour temperature: 4000 K. Colour rendering: Ra>80. MacAdams factor: SDCM:3 . Lifetime: L80/B20>100,000, L90>50.000. Light distribution: Direct. Optic: Plastic opal prism. Luminiare class: Class III. Contains light source of energy class: C. Housing: Aluminium. Height: 44 mm. Length: 597 mm. Width: 597 mm EAN: 7021982126819. The EPD also covers the following products: EAN: 7021982126802 - SENSE PRO 600X600 3000K RA>80 PIR Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Pro 600x600 Pir - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.19444444446 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-01-08" - "2029-01-08"
Publication date	2024-01-08
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/701588_Sense%20PIR/50/701588_Sense%20PIR.pdf Link to product data on our website: https://www.sg-as.com/products/sense-pir/212681

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-5749-5044_Sense-Pro-600x600-Pir.pdf

Original EPDs

NEPD-5749-5044_Sense-Pro-600x600-Pir.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-18T13:43:04
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a5572f7c-0ee8-42c6-9e38-2b8e479c6c08
Date of last revision	2023-12-28T12:21:48.1782981Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-5749-5044-EN
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	28.23	0.0281	0.9478	0.2538	0.001565	4925	0.03779	0.1129	0.06923	-15.29
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.444	0	0	0	-3.444	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	31.67	0.0281	0.9478	0.2538	-3.443	4925	0.03779	0.1129	0.06923	-15.29
Use of non renewable primary energy (PENRE)	Input	MJ	448.6	2.483	11.65	22.34	0.09505	380.8	2.64	1.039	0.4377	-26.52
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	50.65	0	0	0	0	0	0	-51.88	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	496.2	2.483	11.65	22.34	0.09505	380.8	2.64	-50.84	0.4377	-26.52
Use of secondary material (SM)	Input	kg	0.3766	0	0	0	0	0	0	0	0.002728	0.03248
Use of renewable secondary fuels (RSF)	Input	MJ	0.2284	0.0005496	0.0005246	0.0082	0.0000519	3.868	0.001352	0.002169	0.0005735	0.02563
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.07441	0.004667	0.005719	0.04468	0.000214	9.635	0.004834	-0.00005192	0.01094	0.1016
Use of net fresh water (FW)	Input	m3	0.2486	0.0002776	0.007265	0.001949	0.00004485	36.78	0.0002823	0.00301	0.0004577	-0.03862
Hazardous waste disposed (HWD)	Output	kg	0.14	0.0002244	0.0009709	0.001134	0	0.2442	0.0001362	0.00002574	0.06766	-0.005841
Non hazardous waste dispose (NHWD)	Output	kg	3.883	0.1192	0.1212	0.7083	0.42	29.29	0.1284	0.0349	1.21	-0.6784
Radioactive waste disposed (RWD)	Output	kg	0.0006574	0.00001629	0.00002263	0.000153	0	0.003405	0.00001798	0.000001287	0.000002054	-0.00007133
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.05987	0	0.3906	0	0	0.9076	0.00008521	-0.001271
Materials for energy recovery (MER)	Output	kg	0	0	0.005642	0	0.02936	0	0	0.9205	0.00003779	-0.0001674
Exported electrical energy (EEE)	Output	MJ	0	0	0.008668	0	0.02402	0	0	1.414	0.0004486	-0.0004101
Exported thermal energy (EET)	Output	MJ	0	0	0.1311	0	0.3634	0	0	21.4	0.006787	-0.006205

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	458	2.483	11.65	22.34	0.09505	380.2	2.64	1.038	0.4375	-26.52
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004034	0.000004507	0.00000299	0.00003065	1.654E-7	0.002077	0.000004823	6.952E-7	1.701E-7	-0.0014
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2713	0.0005027	0.006567	0.02343	0.00003217	0.2176	0.0005018	0.0007708	0.0001591	-0.08098
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3908	0.00006543	0.000199	0.0005624	0.713	0.7701	0.00007227	0.0001938	0.00001991	-0.005968
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	35.24	0.168	1.282	1.579	0.006794	27.86	0.1746	2.251	0.1212	-2.314
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	34.89	0.1682	1.283	1.579	0.7198	28.74	0.1747	2.251	0.1213	-2.336
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.04021	0.00006144	0.0001397	0.0007766	0.000002247	0.1149	0.00006215	0.0001533	0.0001095	-0.01592
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	35.58	0.1682	1.222	1.579	0.006796	28.68	0.1747	2.251	0.1248	-2.601
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.002939	0.000001576	0.00002325	0.00001029	5.578E-8	0.002003	0.000001395	0.000002999	7.033E-7	-0.0004987
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.03602	0.00009897	0.00153	0.005628	0.00001064	0.02392	0.00009929	0.0002805	0.0001575	-0.005024
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3856	0.001107	0.01687	0.06267	0.0001152	0.3114	0.001111	0.00293	0.0005328	-0.06573
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1441	0.0004144	0.006358	0.01699	0.00003311	0.08374	0.0004254	0.0007289	0.0001988	-0.02021
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000002887	3.654E-8	4.715E-8	3.477E-7	1.434E-9	0.00000191	3.955E-8	8.751E-9	4.625E-9	-0.009037
Water (user) deprivation potential (WDP)	m3 world eqv.	795.7	0.8096	1.088	14.43	0.1205	6.629E+4	2.554	8.081	4.317	-306.3

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.7671	0.01032	0.01683	0.09666	0.0004067	6.899	0	0.01154	0.004407	0.001847	-0.08036
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002074	1.086E-8	7.703E-8	5.794E-8	4.75E-10	0.00000156	0	1.069E-8	4.136E-9	3.006E-9	-3.014E-7
Potential Soil quality index (SQP)²	unitless	98.96	1.701	2.267	11	0.06376	191.5	0	1.847	0.2179	1.3	-22.69
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001729	1.973E-9	5.595E-8	1.147E-8	1.59E-10	0.000001948	0	2.138E-9	5.745E-8	6.78E-10	-2.858E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.244E-8	0	3.55E-10	0	4E-12	8.269E-8	0	0	1.004E-9	6.5E-11	-9.124E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1822	2.013	29.01	15.36	0.1268	1732	0	1.957	5.85	175.9	-613.5