Process Data set: Filigrandæk 65 mm tykkelse 2023 (en)

Process Data set: Filigrandæk 65 mm tykkelse 2023 (en) da

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Danmark
Reference year	2025
Name	Filigrandæk 65 mm tykkelse 2023
Technical purpose of product or process	Filigrandæk kan bruges til de fleste dæk konstruktioner og er et halv fabrikat som skal armeres og støbes færdig på pladsen. Der er indstøbt underside armering i filigrandæk fra fabrik, overside på dæk er rugjort for bedre støbeskel samt der er placeret filigrandragere i spændretningen. Filigrandæk leveres typisk i en brede på 2,4 m og har den spændlængde der ønskes. Armeringen vil være forskelig fra projekt til projekt, i dette tilfælde er der regnet på en standard løsning. Den deklarerede enhed er 1 ton filigrandæk Beton recept R95 Beton styrken er min. C35 Eksponeringsklasse X0/XC1 Miljø klasse: passiv Dæklag 15 mm Densitet 2661,5 kg /m³ Armeringen er anslået til 10 kg pr /m² (Y-stål 550 MPa) Svarende til 66,3 kg pr t. Støbt med RAPID cement CEM I 52,5 N (MS) (LA) samt tilslag af blå Rønne Granit 2/8 samt 11/16 samt rent kvartssand /beton sand Kl E
Classification	Class name : Hierarchy level EPDNorge: Construction / Concrete goods
General comment on data set	Datakvalitet: Specifikke data for produktsammensætningen er fremskaffet af producenten. De repræsenterer productionen af det deklarerede produkt og blev indsamlet til udarbejdelsen af denne EPDen i det angivne studieår. Baggrundsdata er baseret på EPDer iht. til EN 15804, og forskellige LCA databaser Datakvaliteten for råmaterialerne i A1 er præsenteret i tabellen under. Allokering: Allokering er foretaget iht. bestemmelser i EN 15804. Indgående energi og vand, samt produktion af affald i egen produktion er allokeret lige mellem alle produkterne gennem masseallokering. Miljøpåvirkninger og ressourceforbrug for primærproduktion af recirkulerede materialer er allokeret til det oprindelige produktsystem. Cut-off kriterier: Alle vigtige råmaterialer og alle vigtige energiforbrug er inkluderet. Produktionsprocesser for råmaterialer og energistrømme som indgår med meget små mængder (mindre end 1%) kan udelades iht. EN 15804. Disse cutoff kriterier gælder ikke for farlige materialer og stoffer.
Copyright	Yes
Owner of data set	PL Beton A/S
Quantitative reference
Reference flow(s)	Filigrandæk 65 mm tykkelse 2023 - 1.0 * 1000.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-20 - 2030-01-20
Publication date	2025-01-20
Technological representativeness
Technology description including background system	Produceret hos PL Beton, Mulebyvej 40, Rønne. Data på beton og transport er baseret på 1 års produktion af de pågældende betonelementer. Der er taget højde for regler om omkring krav til maksimal afvigelse på +- 10% GWP. EPDen er derfor en gennemsnits EPD af produceret elementer.

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 020:2018 Part B for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 020:2018 Part B for Concrete and concrete elements

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8775-8439_Filigrand-k-65-mm-tykkelse-2023.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Alexander Borg

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-11T09:54:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a3db7442-2dea-4989-9d5f-57a22c035cf7
Date of last revision	2025-01-17T12:07:23.858668Z
Data set version	00.06.000
Registration authority	EPD Norway
Registration number	NEPD-8775-8439
Owner of data set	PL Beton A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	389.8	0.5424	113.2	3.217	0.3	1.768	10.98	0.0689	-39.03
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.871	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	391.7	0.5424	113.2	3.217	0.3	1.768	10.98	0.0689	-39.03
Use of non renewable primary energy (PENRE)	Input	MJ	917.2	57.72	211.6	353.9	55.07	123.5	21.35	4.477	-416.8
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	10.73	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	928	57.72	211.6	353.9	55.07	123.5	21.35	4.477	-416.8
Use of secondary material (SM)	Input	kg	79.22	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	1.919	0.01899	3.286	0.09981	0	0.06324	0	0.001424	1.463
Use of non renewable secondary fuels (NRSF)	Input	MJ	46.28	0.07495	0.2247	0.2261	0	0.2261	0	0.004094	47.3
Use of net fresh water (FW)	Input	m3	4.155	0.003879	0.4535	0.02428	0.002834	0.01321	0.03655	0.005333	-1.381
Hazardous waste disposed (HWD)	Output	kg	3.497	0.002442	0.6903	0.01568	0.001621	0.006369	0.002131	0	-0.2431
Non hazardous waste dispose (NHWD)	Output	kg	122.3	1.315	90.13	6.494	0.06521	6.006	0.06734	32.4	-18.71
Radioactive waste disposed (RWD)	Output	kg	0.008137	0.0004001	0.0007358	0.002448	0.0003824	0.0008412	0.0002256	0	-0.0001531
Components for re-use (CRU)	Output	kg	3.3	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	14.97	0	24.58	0	0	0	967.6	0	0
Materials for energy recovery (MER)	Output	kg	0.5386	0	23.27	0	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	16	0	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0	0	242	0	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	893.7	57.72	211.6	353.9	55.07	123.5	21.34	4.477	-415.1
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0003933	0.00005989	0.0001327	0.0003465	0.00000614	0.0002256	0.000008719	0.000001228	-0.0009629
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.5833	0.08236	0.0943	0.6139	0.04186	0.02347	0.005561	0.001354	-0.243
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	1.913	0.001259	0.37	0.008038	0.0007502	0.00338	0.005935	0.000118	-0.06619
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	170.1	4.184	16.2	26.18	4	8.167	0.687	0.1387	-47.22
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	172	4.186	16.58	26.2	4	8.173	0.6967	0.1389	-47.3
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.09276	0.001755	0.01276	0.01412	0.0003154	0.002907	0.0009508	0.00002721	-0.02163
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	171.1	4.186	19.44	26.2	4	8.173	0.6879	0.1389	-69.84
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003062	0.00002145	0.000725	0.0001341	0.00001457	0.00006525	0.00004342	0.000001036	-0.002834
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.1316	0.01935	0.02861	0.1519	0.01848	0.004644	0.00163	0.0005078	-0.0529
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.477	0.2165	0.3318	1.689	0.2	0.05195	0.01877	0.005594	-0.5506
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.4144	0.05725	0.08603	0.443	0.05574	0.0199	0.005027	0.0016	-0.2463
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003081	8.759E-7	0.000001675	0.000005458	8.64E-7	0.00000185	1.355E-7	6.755E-8	-0.000001809
Water (user) deprivation potential (WDP)	m3 world eqv.	2397	31.88	1651	164.1	11.7	119.4	2355	9.424	699.8

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.1	0.2511	0.8841	1.53	0.24	0.5397	0.358	0.01943	-0.1591
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000436	1.337E-7	0.000001488	9.92E-7	0.000005066	5E-7	8.902E-8	2.884E-8	-0.000004144
Potential Soil quality index (SQP)²	unitless	125.8	22.2	354.1	115.4	6.69	86.38	12.07	16.32	51.03
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.846E-7	2.851E-8	2.362E-7	2.64E-7	2.8E-8	1E-7	1.355E-8	1.296E-9	0.000004676
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.8E-8	0	6.705E-9	0	1E-9	0	9.68E-10	6.5E-11	-2.19E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2201	36.25	3E+2	222.7	30.1	91.54	15.12	2.214	-2553