Process Data set: EXQ 5G1,5 (en) - EPD Global Digi Node

Process Data set: EXQ 5G1,5 (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Scandinavia
Reference year	2025
Name	EXQ 5G1,5
Use advice for data set	The analysis is a cradle-to-grave study made for 1 m of cable manufactured , installed and used indoors or outdoors over the lifetime 40 years. Modules A1-A5 are included in the analysis. It includes the extraction and production of raw materials, transportation to the factory, the production process itself, transportation to market and installation of the product. Modules B1-B7 describe the use phase and are declared for an outdoor cable. B6 is the operational energy usage based on a normal use. C1-C4, D are mandatory modules which include end of life treatment of materials and the benefits from recycling.
Technical purpose of product or process	EXQ is a PEX insulated and halogen free flame retardant sheathed house wiring cable for fixed installation on ladders, in conduits or ducts. For indoor and outdoor use, but not in ground or water. Further information can be found at https://amokabel.com/
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Amokabel AB
Quantitative reference
Reference flow(s)	EXQ 5G1,5 - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.002756248919 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-16 - 2030-01-16
Publication date	2025-01-16
Technological representativeness
Technology description including background system	Max conductor temperature: -25°C/+70°C Voltage Rating U0/U: 300/500 V CPR class: Dca-s1,d2,a1 Information and datasheets can be found at https://amokabel.com/

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8754-8418_EXQ-5G1-5.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-10T08:51:03
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a14bb652-a450-4760-b2b5-a01c172ed371
Date of last revision	2025-01-14T14:21:36.8989811Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8754-8418
Owner of data set	Amokabel AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.236	0.003404	0.06315	0.002066	0.01667	25.39	0.0005454	0.000318	0.001837	-1.051
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.09254	0	0	0	-0.09069	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	1.329	0.003404	0.06315	0.002066	-0.07403	25.39	0.0005454	0.000318	0.001837	-1.051
Use of non renewable primary energy (PENRE)	Input	MJ	7.893	0.2617	0.1357	0.1443	0.1145	52.93	0.0381	0.01082	0.02211	-0.7012
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	4.772	0	0	0	-0.01949	0	0	-4.657	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	12.66	0.2617	0.1357	0.1443	0.09502	52.93	0.0381	-4.646	0.02211	-0.7012
Use of secondary material (SM)	Input	kg	0.01243	0	2.899E-7	0	0.0001491	0	0	0	0	0.0186
Use of renewable secondary fuels (RSF)	Input	MJ	0.03933	0.000119	0.0002467	0.00007392	0.0005013	0.0984	0.00001951	0.000008963	0.00003831	0.001625
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.002362	0.0004012	0.0007804	0.0002643	0.00007355	0.3108	0.00006977	0	0.0002163	-0.04501
Use of net fresh water (FW)	Input	m3	0.009407	0.00002548	0.0001448	0.00001544	0.0001249	0.05767	0.000004075	0.00003056	0.0000278	-0.002547
Hazardous waste disposed (HWD)	Output	kg	0.005156	0.00001302	0.00005966	0.000007444	0.00009833	0.002763	0.000001965	0	0.002606	-0.0007265
Non hazardous waste dispose (NHWD)	Output	kg	0.1455	0.01075	0.0174	0.00702	0.0106	0.1744	0.001853	0	0.08202	-0.03379
Radioactive waste disposed (RWD)	Output	kg	0.00002607	0.000001789	0.000001981	9.832E-7	4.076E-7	0.0007963	2.596E-7	0	1.486E-7	-0.000001336
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01801	0	0.0009767	0	0	0.03879	0.000004918	-0.000728
Materials for energy recovery (MER)	Output	kg	0	0	0.0004472	0	0.007451	0	0	0.05483	1.203E-7	-0.00009586
Exported electrical energy (EEE)	Output	MJ	0	0	0.0006073	0	0.006154	0	0	0.1063	0.000007803	-0.0002349
Exported thermal energy (EET)	Output	MJ	0	0	0.009188	0	0.0931	0	0	1.609	0.0001181	-0.003553

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	12.43	0.2616	0.1354	0.1443	0.179	52.82	0.0381	0.01082	0.02211	-0.7013
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000149	4.226E-7	5.206E-8	2.637E-7	0.000001809	0.00001804	6.961E-8	5.79E-9	7.555E-9	-0.0000599
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.0174	0.0001507	0.000008595	0.00002744	0.0002155	0.002935	0.000007242	0.00002071	0.000007499	-0.01075
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.001769	0.000006858	0.00004598	0.000003951	0.01001	0.00916	0.000001043	0.000001338	6.146E-7	-0.0003148
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.5518	0.01782	0.002241	0.009546	0.0103	0.4507	0.00252	0.1654	0.006739	-0.0729
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.5505	0.01783	0.002359	0.009554	0.02031	0.4891	0.002522	0.1654	0.00674	-0.07361
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0004499	0.00000723	0.00007282	0.000003398	0.000007039	0.02927	8.969E-7	1.964E-7	2.828E-7	-0.0003884
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.552	0.01783	0.002355	0.009553	0.01029	0.4885	0.002522	0.1654	0.006819	-0.03969
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0001401	1.285E-7	7.819E-8	7.627E-8	0.000001699	0.00003047	2.013E-8	1.268E-8	1.381E-8	-0.00007278
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001204	0.00003545	0.000001704	0.000005429	0.00001637	0.0004998	0.000001433	0.000009942	0.000009181	-0.0004636
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01731	0.0003945	0.00002096	0.00006072	0.0002274	0.00658	0.00001603	0.0001075	0.00002984	-0.007071
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.004816	0.0001135	0.000005075	0.00002326	0.00006408	0.001499	0.00000614	0.00002575	0.000009798	-0.001922
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	3.326E-8	3.949E-9	6.11E-10	2.162E-9	5.65E-10	2.21E-7	5.71E-10	1.26E-10	2.87E-10	-0.0006794
Water (user) deprivation potential (WDP)	m3 world eqv.	36.11	0.2202	13.32	0.1396	0.6922	5.36E+3	0.03685	0.0245	0.3383	1.82

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.0288	0.001141	0.004517	0.0006309	0.0004753	0	0	0	0	0	1.811	0	0	0.0001665	0.00001829	0.0001228	-0.001557
Potential incidence of disease due to PM emissions (PM)²	disease incidence	5.065E-8	9.77E-10	7.3E-11	5.84E-10	6.73E-10	0	0	0	0	0	2.114E-8	0	0	1.54E-10	8E-11	1.41E-10	-2.6E-8
Potential Soil quality index (SQP)²	unitless	4.28	0.1586	0.06093	0.101	0.0619	0	0	0	0	0	23.39	0	0	0.02665	0.001313	0.06515	-2.138
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.682E-7	2.08E-10	5.4E-11	1.17E-10	3.244E-9	0	0	0	0	0	1.93E-8	0	0	3.1E-11	1.39E-10	2.6E-11	-1.195E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.54E-9	0	2E-12	0	4.3E-11	0	0	0	0	0	8.01E-10	0	0	0	4E-12	1E-12	-1.4E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	198.9	0.1866	0.07431	0.107	2.591	0	0	0	0	0	27.87	0	0	0.02824	0.0323	16.03	-98.93