Process Data set: PE 100 Pressure pipe and pipe fittings (en)

Process Data set: PE 100 Pressure pipe and pipe fittings (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Nordic countries.
Reference year	2024
Name	PE 100 Pressure pipe and pipe fittings
Use advice for data set	The system boundaries for this EPD is module A1-A5. A4: Distance for transport from manufacturer to building site is set to 300 km by truck. This distance is given in new PCRs as default value for Norway. For project specific EPDs, tugboat can be can be included as transport. A5: Only packaging waste is included. Installment factors are not included due to uncertain assembly scenarios. C and D: Is included as zero because it is assumed that the pipes are left in the ground after end of life.
Technical purpose of product or process	PE 100 pressure pipes and fittings made from PE 100 pipes. Pipes and fittings are applicable for water supply, drains and sewer under pressure, non-pressure drains, sewers, and surface water systems. These pipes can be installed underground, above ground, in water and for trenchless technologies. The pipes and fittings are black, and black with identification stripes. The colours are according to the product standards. This EPD covers pipes in coils, straight lengths and pipe fittings made from pressure pipes. For project specific EPDs, identifications stripes can be included. For more information: www.haplast.no The product standards for these pressure pipes are: NS-EN 12201.
Classification	Class name : Hierarchy level EPDNorge: Construction / Piping
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. All raw materials and all the essential energy are included.
Copyright	Yes
Owner of data set	Haplast AS
Quantitative reference
Reference flow(s)	PE 100 Pressure pipe and pipe fittings - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-06-17" - "2029-06-17"
Publication date	2024-06-17
Technological representativeness
Technology description including background system	The dimensions given for these products, i.e. diameter and wall thickness, are mean values based on the dimensions given in the product standards. For more information: www.haplast.no

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR Part A: Construction products and services. Ver. 1.0. April 2017

Data sources, treatment and representativeness

Documentation of data quality management

NPCR Part A: Construction products and services. Ver. 1.0. April 2017

Data source(s) used for this data set

NEPD-6903-6293_PE-100-Pressure-pipe-and-pipe-fittings.pdf

Original EPDs

NEPD-6903-6293

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-09-18T20:03:34
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	a04f7343-0fe3-42f4-93ab-011fcb9ae924
Date of last revision	2024-06-14T08:55:01.8857054Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-6903-6293
Owner of data set	Haplast AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Waste processing C3
Use of renewable primary energy (PERE)	Input	MJ	5.317	0.01072	0.00007405	0
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.1399	0	-0.1399	0
Total use of renewable primary energy resource (PERT)	Input	MJ	5.457	0.01072	-0.1398	0
Use of non renewable primary energy (PENRE)	Input	MJ	33.75	0.7492	0.003522	0
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	42.51	0	-0.04476	-42.47
Total use of non renewable primary energy resource (PENRT)	Input	MJ	76.27	0.7492	-0.04124	-42.47
Use of secondary material (SM)	Input	kg	1.016E-7	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.07486	0.0003837	0.000002133	0
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01732	0.001372	0.00002221	0
Use of net fresh water (FW)	Input	m3	0.05154	0.00008012	0.000002492	0
Hazardous waste disposed (HWD)	Output	kg	0.00576	0.00003864	0	0
Non hazardous waste dispose (NHWD)	Output	kg	0.1292	0.03643	0.0111	0
Radioactive waste disposed (RWD)	Output	kg	0.00006518	0.000005103	0	0
Components for re-use (CRU)	Output	kg	0	0	0	0
Materials for recycling (MFR)	Output	kg	7.139E-8	0	0.0005618	0
Materials for energy recovery (MER)	Output	kg	0.01843	0	0.009999	0
Exported electrical energy (EEE)	Output	MJ	0.01095	0	0.00696	0
Exported thermal energy (EET)	Output	MJ	0.1657	0	0.1053	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5
Abiotic depletion potential - fossil resources (ADPF)	MJ	73.19	0.7491	0.003521
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00002106	0.000001369	4.828E-9
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.00788	0.0001424	0.000002271
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.001959	0.00002051	0.01528
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.124	0.04955	0.0003562
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.123	0.04958	0.01564
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001306	0.00001763	7.569E-8
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.024	0.04958	0.0003563
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00003755	3.958E-7	3.404E-9
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001416	0.00002818	0.000001027
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01578	0.0003152	0.00001033
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.007298	0.0001207	0.000002683
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	7.079E-8	1.122E-8	4.8E-11
Water (user) deprivation potential (WDP)	m3 world eqv.	216.4	0.7246	0.006138

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.08835	0.003274	0.00001309	0	0	0	0	0
Potential incidence of disease due to PM emissions (PM)²	disease incidence	6.908E-8	3.033E-9	2.8E-11	0	0	0	0	0
Potential Soil quality index (SQP)²	unitless	4.387	0.524	0.0024	0	0	0	0	0
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.604E-8	6.07E-10	1.9E-11	0	0	0	0	0
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.1E-10	0	0	0	0	0	0	0
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	13.91	0.5553	0.003943	0	0	0	0	0