Process Data set: Primo 1100 (en) - EPD Global Digi Node

Process Data set: Primo 1100 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2024
Name	Primo 1100
Technical purpose of product or process	Attractive, round wall luminaire that can be installed both indoors and outdoors. Made of die-cast powder-coated aluminium. Diffuser made of UV-stabilised opal polycarbonate. Two inputs/outputs for cables, option of both visible and concealed cabling, and loopable quick clips. Corrosion-proof with 10-year warranty, IP65 and vandal-resistant rating IK10. Variants integrated sensor or Twilight relay. System Wattage: 10.0 W. Luminous flux: 740lm lm. Efficacy: lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L70/B50>50,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II. Housing: Aluminium. Optics: UV-stabilized polycarbonate. Height: 120.0mm. Diameter: 270,0 mm. Depth: 120 mm. EAN: 7021986435702 The EPD also covers the following products: EAN: 7021986415704 - PRIMO WHITE 1100 LED 3000K EAN: 7021986415728 - PRIMO WHITE 1100 LED 4000K EAN: 7021986435726 - PRIMO GRAPHITE 1100 LED 4000K EAN: 7021986445701 - PRIMO BLACK 1100 LED 3000K EAN: 7021986445725 - PRIMO BLACK 1100 LED 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Primo 1100 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.167045772199 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-11-22 - 2029-11-22
Publication date	2024-11-22
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/primo/643570/pdf/specification_643570.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701410_Primo/50/701410_Primo.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8199-7869_Primo-1100.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-18T16:16:36
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	9be63344-17c3-4443-b48c-eeb1f169aba2
Date of last revision	2024-11-19T20:27:19.4609443Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8199-7869
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	23.4	0.00129	0.5837	0.115	0.001344	684.8	0.01448	0.02433	0.02849	-1.157
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	2.162	0	0	0	-2.162	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	25.56	0.00129	0.5837	0.115	-2.161	684.8	0.01448	0.02433	0.02849	-1.157
Use of non renewable primary energy (PENRE)	Input	MJ	158.9	0.114	5.8	10.12	0.08163	52.95	1.279	0.2065	0.1699	-1.115
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	7.413	0	0	0	0	0	0	-7.781	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	166.3	0.114	5.8	10.12	0.08163	52.95	1.279	-7.575	0.1699	-1.115
Use of secondary material (SM)	Input	kg	1.076	0	0	0	0	0	0	0	0.0003382	0.001856
Use of renewable secondary fuels (RSF)	Input	MJ	0.1257	0.00002523	0.0005131	0.00379	0.00004457	0.5378	0.0002831	0.0004231	0.0003503	0.001288
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.05354	0.0002142	0.00483	0.0203	0.0001837	1.34	0.002404	-0.00001584	0.002997	-0.08122
Use of net fresh water (FW)	Input	m3	0.1352	0.00001274	0.01582	0.0008703	0.00003852	5.115	0.000143	0.0004946	0.0001922	0.0008305
Hazardous waste disposed (HWD)	Output	kg	0.1021	0.0000103	0.0008012	0.0004936	0	0.03395	0.0001156	0.000007813	0.02721	-0.00211
Non hazardous waste dispose (NHWD)	Output	kg	1.935	0.005471	0.05418	0.3126	0.3607	4.073	0.0614	0.01055	0.4498	0.001222
Radioactive waste disposed (RWD)	Output	kg	0.0003456	7.48E-7	0.000004435	0.00006946	0	0.0004734	0.000008394	3.881E-7	9.179E-7	-6.473E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01727	0	0.3355	0	0	0.7178	0.00001268	-0.00007263
Materials for energy recovery (MER)	Output	kg	0	0	0.003726	0	0.0004409	0	0	0.1414	3.102E-7	-0.000009563
Exported electrical energy (EEE)	Output	MJ	0	0	0.005613	0	0.02063	0	0	0.2177	0.00002012	-0.00002343
Exported thermal energy (EET)	Output	MJ	0	0	0.08492	0	0.3121	0	0	3.293	0.0003045	-0.0003545

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	166.3	0.114	5.8	10.12	0.08163	52.87	1.279	0.2064	0.1699	-1.115
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.006135	2.069E-7	0.000002025	0.00001366	1.42E-7	0.0002888	0.000002322	1.599E-7	6.322E-8	-0.0004
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1081	0.00002307	0.003423	0.01105	0.00002763	0.03026	0.000259	0.0001376	0.00006047	-0.01632
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.5093	0.000003004	0.0001631	0.0002542	0.6114	0.1071	0.00003371	0.00003748	0.000004374	0.0002257
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	14.67	0.007714	0.6553	0.7168	0.005835	3.873	0.08657	0.3521	0.02386	-0.08783
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	14.19	0.007719	0.6555	0.7171	0.6172	3.996	0.08663	0.3521	0.02389	-0.08441
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03024	0.00000282	0.0001033	0.000357	0.00000193	0.01598	0.00003165	0.00003518	0.00003152	0.003188
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	14.8	0.007719	0.6191	0.7171	0.005837	3.988	0.08663	0.3521	0.02517	-0.1052
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001097	7.236E-8	0.00001455	0.000004574	4.791E-8	0.0002786	8.12E-7	5.767E-7	2.427E-7	-0.00009223
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01643	0.000004543	0.000707	0.002658	0.000009139	0.003326	0.00005099	0.00004666	0.00003601	-0.0007717
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1859	0.0000508	0.00779	0.0296	0.00009893	0.0433	0.0005701	0.0004907	0.0002141	-0.01097
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.05601	0.00001902	0.002052	0.008	0.00002844	0.01164	0.0002135	0.0001239	0.0000711	-0.003056
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003158	1.68E-9	9.605E-9	1.579E-7	1.231E-9	2.656E-7	1.883E-8	1.736E-9	1.83E-9	-0.001523
Water (user) deprivation potential (WDP)	m3 world eqv.	600.8	0.03716	0.9452	6.704	0.1035	9217	0.4171	1.893	2.908	120.1

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.4024	0.0004737	0.005017	0.04388	0.0003493	0.9592	0	0.005316	0.0009353	0.000886	-0.001962
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.409E-7	4.96E-10	4.623E-8	2.534E-8	4.07E-10	2.17E-7	0	5.597E-9	7.64E-10	1.092E-9	-3.152E-8
Potential Soil quality index (SQP)²	unitless	54.41	0.07809	1.229	4.884	0.05476	26.63	0	0.8764	0.04823	0.391	-4.592
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.229E-7	8.9E-11	8.037E-9	5.054E-9	1.37E-10	2.708E-7	0	1.018E-9	1.647E-8	2.78E-10	-4.091E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.997E-8	0	1.83E-10	0	3E-12	1.15E-8	0	0	2.83E-10	2.5E-11	-2.59E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	872.7	0.09239	17	6.896	0.1089	240.9	0	1.037	0.9919	188.2	-126.1