Process Data set: Frosta 480 Dali (en)

Process Data set: Frosta 480 Dali (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Frosta 480 Dali
Technical purpose of product or process	Frosta 480 is an elegantly designed decorative luminaire for ceilings and walls. It is suitable for homes as well as hotels, restaurants, etc. The diffuser provides a perfectly even light distribution with an aura of light in the ceiling. Easy installation with holes to fit all know ceiling boxes. For concealed or visible cabling. Dimmable with phasecut and DALI / push. Light levels can also be adjusted with dip switches on the driver. Can be made with SensorDim on request, and Frosta 480 can be made with emergency (1 hour). A pendant kit is sold separately, and fits both the phasecut and DALI / push version. System Wattage: 24.0 W. Luminous flux: 3150lm. Efficacy: 131 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B10>100,000, L90>60,000. Light distribution: Direct/Indirect 92/8%. Control/Dimming: DALI-2 / Push Dim. Luminiare class: Class II. Housing: Steel. Optics: Acrylic (PMMA). Height: 90.0mm. Diameter: 480,0mm. EAN: 7021982117077 The EPD also covers the following products: EAN: 7021982117060 - FROSTA 480 WHITE 2700K DALI EAN: 7021982117084 - FROSTA 480 WHITE 4000K DALI Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Frosta 480 Dali - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.891629105592 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-31 - 2030-03-31
Publication date	2025-03-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/frosta-480/211707/pdf/specification_211707.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702580_Frosta%20480/50/702580_Frosta%20480.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

Frosta-480-Dali.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-06-09T16:02:25
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	996a53b4-7a03-454a-a62b-4a1d436d3b63
Date of last revision	2025-03-28T11:43:03.2007424Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9511-9186
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	91.76	0.00349	1.555	0.3063	0.007175	3688	0.03855	0.1098	0.1848	-5.094
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	11.32	0	0	0	-11.32	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	103.1	0.00349	1.555	0.3063	-11.31	3688	0.03855	0.1098	0.1848	-5.094
Use of non renewable primary energy (PENRE)	Input	MJ	664.8	0.3084	15.45	26.96	0.4358	285.2	3.407	0.4749	0.6489	-5.594
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	20.4	0	0	0	0	0	0	-21.14	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	685.3	0.3084	15.45	26.96	0.4358	285.2	3.407	-20.67	0.6489	-5.594
Use of secondary material (SM)	Input	kg	3.858	0	0	0	0	0	0	0	0.004369	0.004904
Use of renewable secondary fuels (RSF)	Input	MJ	0.1874	0.00006827	0.001367	0.01009	0.000238	2.897	0.0007541	0.0009612	0.0007264	-0.01242
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.02616	0.0005797	0.01286	0.05408	0.0009811	7.216	0.006403	-0.00005156	0.03793	-0.6117
Use of net fresh water (FW)	Input	m3	0.5418	0.00003448	0.04213	0.002318	0.0002056	27.55	0.0003809	0.001338	0.0004786	-0.01149
Hazardous waste disposed (HWD)	Output	kg	0.2473	0.00002787	0.002134	0.001315	0	0.1829	0.0003078	0.00002153	0.2146	-0.001019
Non hazardous waste dispose (NHWD)	Output	kg	6.672	0.0148	0.1443	0.8324	1.926	21.94	0.1635	0.0299	0.6227	-0.00397
Radioactive waste disposed (RWD)	Output	kg	0.001765	0.000002024	0.00001181	0.000185	0	0.00255	0.00002236	0.000001203	0.000001193	-0.00002849
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04601	0	1.791	0	0	1.272	0.0000266	-0.0001919
Materials for energy recovery (MER)	Output	kg	0	0	0.009923	0	0.000443	0	0	0.2965	6.505E-7	-0.00002527
Exported electrical energy (EEE)	Output	MJ	0	0	0.01495	0	0.1101	0	0	0.4556	0.0000422	-0.00006192
Exported thermal energy (EET)	Output	MJ	0	0	0.2262	0	1.666	0	0	6.893	0.0006384	-0.0009368

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	685.1	0.3084	15.45	26.96	0.4358	284.8	3.406	0.4748	0.6483	-5.592
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005261	5.599E-7	0.000005395	0.00003638	7.582E-7	0.001556	0.000006185	4.221E-7	3.063E-7	-0.0008388
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.462	0.00006244	0.009117	0.02943	0.0001475	0.163	0.0006897	0.0003051	0.0002604	-0.0435
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-2.734	0.000008128	0.0004345	0.0006771	3.268	0.5768	0.00008978	0.0001039	0.00004084	-0.001796
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	55.49	0.02087	1.745	1.909	0.03115	20.86	0.2306	0.7428	0.08157	-0.3222
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	52.86	0.02089	1.746	1.91	3.299	21.53	0.2307	0.7431	0.08199	-0.3264
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1094	0.000007631	0.0002751	0.0009507	0.0000103	0.08606	0.0000843	0.0002439	0.0003836	-0.002406
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	56.09	0.02089	1.649	1.91	0.03116	21.48	0.2307	0.743	0.08376	-0.1498
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.009926	1.958E-7	0.00003875	0.00001218	2.558E-7	0.0015	0.000002163	0.000001236	0.000002038	-0.000256
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.05919	0.00001229	0.001883	0.00708	0.00004879	0.01792	0.0001358	0.0001013	0.00009696	-0.001984
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.6576	0.0001375	0.02075	0.07884	0.0005282	0.2332	0.001518	0.001069	0.0006712	-0.02896
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2016	0.00005148	0.005465	0.02131	0.0001518	0.06272	0.0005686	0.0002718	0.0002879	-0.00742
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001442	4.539E-9	2.558E-8	4.207E-7	6.576E-9	0.000001431	5.014E-8	4.144E-9	4.401E-9	-0.003615
Water (user) deprivation potential (WDP)	m3 world eqv.	1571	0.1006	2.517	17.85	0.5523	1.11E+3	1.111	5.209	3.673	-40.58

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.327	0.001282	0.01336	0.1169	0.001865	5.167	0	0.01416	0.00244	0.00174	-0.03325
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002748	1.345E-9	1.231E-7	6.748E-8	2.175E-9	0.000001169	0	1.491E-8	1.711E-9	4.758E-9	-8.675E-8
Potential Soil quality index (SQP)²	unitless	155.5	0.2113	3.273	13.01	0.2924	143.4	0	2.334	0.09195	1.647	-11.1
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000003551	2.41E-10	2.14E-8	1.346E-8	7.31E-10	0.000001459	0	2.71E-9	4.57E-8	1.558E-9	-2.521E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.62E-8	0	4.91E-10	0	1.8E-11	6.193E-8	0	0	7.75E-10	2.03E-10	-1.158E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3842	0.25	45.29	18.37	0.5812	1297	0	2.762	2.189	2E+2	-333.2