Key Data Set Information | |
Location | DE |
Geographical representativeness description | Europe. |
Reference year | 2023 |
Name |
|
Technical purpose of product or process | With low sound power level for comfort zones, with individually manually adjustable air control blades. For more information see: www.trox.de/en/9a223ad7f3c464c5 Ceiling swirl diffusers with square or circular diffuser face. Supply air and extract air variants for comfort zones, for a maximum air change rate of 35 per hour. Diffuser face with individually manually adjustable air control blades for horizontal swirling supply air discharge creating high induction levels. For installation into all types of suspended ceilings. Ready-to-install component consisting of the diffuser face with radially arranged, individually adjustable black or white set of air control blades and a plenum box, which is also square in the case of square faceplates (-Q) and round in the case of rounded faceplates (-R). The plenum box has an equalising element for supply air. The plenum box always includes a horizontally or vertically arranged spigot, cross bar and drilled holes or suspension lugs for suspension. The diffuser face is fixed to the cross bar with a central screw, concealed by a decorative cap. Spigot suitable for ducts to EN 1506 or EN 13180. Sound power level of the air-regenerated noise measured according to EN ISO 5135. This EPD includes the environmental data of the product series VDW. The following represents a representative dataset of the most sold variant in the declared sales year (VDW-Q-Z-0-M-0/400x16/0). |
Classification |
Class name
:
Hierarchy level
|
General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
Copyright | Yes |
Owner of data set | |
Quantitative reference | |
Reference flow(s) |
|
Biogenic carbon content |
|
Time representativeness | |
Data set valid until | 2028 |
Time representativeness description | "2023-12-13" - "2028-12-13" |
Technological representativeness | |
Technology description including background system | Nominal sizes 300, 400, 500, 600, 625, 825 mm. Minimum volume flow rate, with tz = -6 K7 – 99 l/s or 25 – 357 m³/h. Maximum volume flow rate, with LWA 50 dB(A)80 – 470 l/s or 288 – 1692 m³/h. Supply air to room air temperature difference 12 – 10 K. For more technical data see: www.trox.de/en/9a223ad7f3c464c5 |
Subtype | representative dataset | ||||
LCA methodology report | |||||
Data sources, treatment and representativeness | |||||
Documentation of data quality management | |||||
Data source(s) used for this data set | |||||
Completeness | |||||
Validation | |||||
| |||||
Compliance Declarations |
Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Data generator | |
Data set generator / modeller |
|
Data entry by | |
Time stamp (last saved) | 2023-12-13T18:24:11 |
Data set format(s) | |
Publication and ownership | |
UUID | 98d60725-5759-46a5-99c0-168046ec9432 |
Date of last revision | 2023-12-01T11:25:31.6645772Z |
Data set version | 00.03.000 |
Registration authority | |
Registration number | NEPD-5501-4818-EN |
Owner of data set | |
Copyright | Yes |
License type | Free of charge for all users and uses |
Access and use restrictions | None |
Indicators of life cycle