Process Data set: OneFit IEC version for horizontal insertion system (en) en
Process information
| Key Data Set Information | |
| Location | CH |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The life cycle assessment is a “cradle-to-grave” analysis, and the system boundaries are defined according to EN 50693, as required by the PCR. For transparency reasons, the manufacturing stage is further divided into an upstream and core stage. |
| Technical purpose of product or process | This Environmental Product Declaration is a “specific product EPD” with extrapolation rules. A representative product configuration is declared as reference product, and the results can be extrapolated for other configurations according to the provided extrapolation rules. The EPD covers the following devices of the MHGV 12.06-12 K1, including related accessories and packaging: • MHGV 12.06-12 K1 with PT1-VGE4 poles • MGHV 12.06-12 K1 with PT1-VG4S poles PT1-VGE4 and PT1-VG4S are embedded poles which are used to provide dielectric strength and protection of the vacuum interrupter. General technical information of the products is presented below. Description Config.1 Config.2 Device Circuit Breaker MHGV MHGV Size Weight [Kg] 150,92 152,91 Ratings Rated voltage [kV] 12 12 Rated current [A] 630-1250 630-1250 Rated short circuit breaking current [kA] Up to 25 32 Pole type Pole PT1 VGE4 VG4S Reference product is MHGV 12.06 K1 with PT1-VGE4 poles. The products are manufactured by ABB Vaasa located in Finland. The manufacturing site is certified according to the following standards: • ISO 9001:2015 – Quality Management Systems • ISO 14001:2015 – Environmental Management Systems • ISO 45001:2018 – Occupational Health and Safety Management Systems • ISO 50001:2018 – Energy management systems The constituent materials of the product are presented below. Type Material Weight [kg] Weight % Metals Steel, low-alloyed 73.04 64.70 Steel, stainless 2.23 1.98 Copper 25.90 22.94 Aluminum 3.06 2.71 Other metals 1.21 1.08 Plastics Polycarbonate 0.04 0.03 Polyamide 0.35 0.31 Other plastics 4.47 3.96 Others Epoxy resin 2.55 2.26 Others 0.05 0.04 Total 112.89 100 |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Both primary and secondary data are used. The main sources for primary data are the bill of materials (BOM) and technical drawings. For all processes for which primary data are not available, generic background data originating from the ecoinvent v3.9.1 database, with system model “allocation, cut-off by classification”, are used. The database Industry Data 2.0 is also used for Polyoxymethylene (POM)/EU-27 and Steel Electrogalvanized which are not available by ecoinvent. The LCA software used for the calculations is SimaPro 9.5. The utility consumption and waste generation by ABB, in the core manufacturing stage, is allocated to the production of one reference product according to applicable rules. For the end-of-life allocation, the “Polluter Pays” principle is adopted according to what is defined in the CEN/TR 16970 standard. However, the potential benefits and avoided loads from recovery and recycling processes are not considered because it is not required by the PCR. According to PCR EPDItaly007 “Electronic and electrical products and systems”, the cutoff criteria can be set to a maximum of 5% of the overall environmental impacts. According to PCR EPDItaly012, in this LCA, grease and stickers have been excluded as their weight is negligible. In addition, production, use and disposal of the packaging of components and semi-finished intermediates have been excluded for the same reason as stated before. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-12-04 - 2029-12-04 |
| Technological representativeness | |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-08-31T13:57:16 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 97e83cfb-5e88-4399-9d66-bdcf8607784d |
| Date of last revision | 2025-07-22T12:23:32.2104375Z |
| Data set version | 00.04.000 |
| Registration authority | |
| Registration number | NEPD-8295-7951 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle