soda4LCA

Process Data set: A25-S280 1800 HF SMR-SEN (en) en

Process information

Key Data Set Information
Location	EE
Geographical representativeness description	Nordic
Reference year	2024
Name	A25-S280 1800 HF SMR-SEN
Use advice for data set	The analysis is a cradle-to-grave study of one luminaire manufactured and installed, used according to a specific lighting regime over a specific lifetime, including waste treatment at end-of-life. A1-A5 includes the extraction and production of raw materials, transportation to the production site, the production process itself, transport to the market and assembly. B6 is the operational energy use stage of the luminaire based on a scenario. C1-C4 includes de-installation of the luminaire, average transport between building site and waste treatment facility, waste processing and disposal. Waste treatment of the product follows the default values provided in EN 50693. D shows the recyclability of metals and plastics, and allows the producers a credit for the net scrap that is produced at the end of a product’s life. The benefits from recycling of net scrap are described in formula from EN 15804:2012+A2:2019. Substitution of heat and electricity generated by the incineration with energy recovery of plastic insulation and other parts is also calculated in module D.
Technical purpose of product or process	Glamox A25-S is a surface mounted luminaire with a simple, timeless design. From the front it’s a perfect circle, in profile the body and the diffuser are joined smoothly together in the same plane, forming a modified super ellipse. Glamox SMR Sensor is a Microwave sensor with relay based ON/OFF switch for a single group of luminaires. This environmental product declaration can be used for the following luminaires: A25538813: A25-S280 1800 HF SMR-SEN 830 A25538814: A25-S280 1800 HF SMR-SEN 840
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Glamox AS
Quantitative reference
Reference flow(s)	A25-S280 1800 HF SMR-SEN - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.09739701581 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-04-03" - "2029-04-03"
Publication date	04-03-2024
Technological representativeness
Technology description including background system	Please visit the product page on our website for more technical information. https://www.glamox.com/

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-6332-5591_A25-S280-1800-HF-SMR-SEN.pdf

Original EPDs

NEPD-6332-5591_A25-S280-1800-HF-SMR-SEN.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T18:13:22
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	97d7d637-6b6a-46fc-81ed-04952f8a0963
Date of last revision	2024-03-21T07:31:02.8152596Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-6332-5591
Owner of data set	Glamox AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	44.17	0.0315	3.499	0.05134	0.0007824	1662	0.01562	0.09802	0.1026	-11.77
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.829	0	0	0	-2.263	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	46	0.0315	3.499	0.05134	-2.262	1662	0.01562	0.09802	0.1026	-11.77
Use of non renewable primary energy (PENRE)	Input	MJ	367.3	2.654	1.511	3.964	0.04753	1717	1.107	0.6916	0.3767	-32.55
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	17.5	0	0	0	0	0	0	-18.81	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	371.6	2.654	1.511	3.964	0.04753	1717	1.107	-18.12	0.3767	-32.55
Use of secondary material (SM)	Input	kg	0.1682	0	0	0	0	0	0	0	0.002466	0.004136
Use of renewable secondary fuels (RSF)	Input	MJ	0.3891	0.001068	0.0006154	0.001799	0.00002595	16.79	0.0005591	0.001478	0.0003752	0.001782
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.04513	0.004828	0.001583	0.006088	0.000107	0	0.001996	-0.00005998	0.02148	-0.07007
Use of net fresh water (FW)	Input	m3	0.354	0.0002367	0.0003003	0.0003838	0.00002242	7.562	0.0001166	0.001318	0.0002815	-0.05086
Hazardous waste disposed (HWD)	Output	kg	0.1109	0.0001292	0.00951	0.000196	0	0.1584	0.00005645	0.00002865	0.1187	0.001919
Non hazardous waste dispose (NHWD)	Output	kg	3.355	0.0912	0.1022	0.1626	0.21	10.49	0.05291	0.03889	0.4262	-0.6591
Radioactive waste disposed (RWD)	Output	kg	0.001074	0.0000182	0.000001812	0.00002712	0	0.01771	0.000007548	0.000001455	7.329E-7	-0.0001176
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.134	0	0.1953	0	0	0.3118	0.00002803	-0.0001619
Materials for energy recovery (MER)	Output	kg	0	0	0.03973	0	0.01468	0	0	0.3125	6.856E-7	-0.00002131
Exported electrical energy (EEE)	Output	MJ	0	0	0.02953	0	0.01201	0	0	0.4802	0.00004448	-0.00005222
Exported thermal energy (EET)	Output	MJ	0	0	0.4468	0	0.1817	0	0	7.265	0.0006729	-0.0007901

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	371.4	2.654	1.511	3.964	0.04752	1.69E+3	1.107	0.6914	0.3763	-32.55
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004566	0.000003803	0.000003385	0.000006373	8.268E-8	0.0009727	0.000001988	5.389E-7	1.764E-7	-0.001394
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2193	0.00249	0.0003191	0.002421	0.00001609	0.2885	0.0003001	0.0003982	0.0001505	-0.07293
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2599	0.00006711	0.002333	0.0001032	0.3571	1.143	0.00002993	0.0001319	0.00002454	-0.009588
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	29.39	0.1854	0.1213	0.2699	0.003397	62.55	0.07341	0.801	0.06163	-2.577
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	29.23	0.1855	0.1236	0.2701	0.3605	67.12	0.07346	0.8013	0.06187	-2.617
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.09257	0.00008444	0.00003628	0.0001069	0.000001124	3.427	0.00002566	0.0001649	0.0002165	-0.03073
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	29.58	0.1855	0.1205	0.2701	0.003398	90.95	0.07346	0.8012	0.06309	-2.606
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003979	0.000001225	0.000002131	0.000001934	2.789E-8	0.004138	5.765E-7	0.000002017	0.000001147	-0.0004167
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02855	0.0006369	0.00005753	0.0006471	0.000005321	0.04558	0.00008899	0.0001203	0.00007323	-0.004614
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3431	0.007078	0.0006106	0.007177	0.0000576	0.612	0.0009842	0.001278	0.0003924	-0.05956
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1104	0.001912	0.0002051	0.001999	0.00001656	0.1434	0.0003013	0.0003288	0.00017	-0.0179
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000001981	4.106E-8	1.344E-8	6.025E-8	7.18E-10	0.000006768	1.674E-8	5.33E-9	2.656E-9	-0.003069
Water (user) deprivation potential (WDP)	m3 world eqv.	1827	1.925	0.7194	3.334	0.06023	1.307E+5	1.056	6.574	1.757	-868

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.287	0.01153	0.00149	0.01728	0.0002033	38.55	0	0.004839	0.003322	0.0009892	-0.1292
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001591	9.223E-9	2.611E-9	1.737E-8	2.37E-10	0.000001529	0	5.285E-9	2.337E-9	2.78E-9	-2.571E-7
Potential Soil quality index (SQP)²	unitless	91.46	1.393	0.4761	2.402	0.03188	1273	0	0.7632	0.1587	1.016	-13.49
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001406	1.583E-9	2.674E-9	3.104E-9	8E-11	0.000001298	0	8.81E-10	5.935E-8	8.74E-10	-2.142E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.126E-8	0	1.46E-10	0	2E-12	4.929E-8	0	0	1.018E-9	1.13E-10	-6.88E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1771	1.832	2.095	2.821	0.06338	2116	0	0.8153	2.624	69.76	-482.4