| Key Data Set Information | |
| Location | SK |
| Geographical representativeness description | Europe. |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | NOTUS-R is a constant air flow volume controller with mechanical type of operation (no need for auxiliary energy). The product is intended to control the constant air flow independently of the duct air pressure in the range of 50 Pa to 1000 Pa. The NOTUS air volume controllers are available in various options and sizes. Specific EPD data is provided as a reference for the NOTUS-R-160-M0 model. Correction factors for other sizes can be estimated using the table in the Technical Data section below. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-11-12" - "2029-11-12" |
| Technological representativeness | |
| Technology description including background system | Technical details can be found at the following link: https://design.systemair.com. To estimate the Global Warming Potential (GWPtot) correction factor for specific product sizes, use the table below. For sizes not listed, calculate the correction factor using the equations provided. Each NOTUS type has a specific equation. The correction factor for NOTUS-S is calculated by multiplying a coefficient by the area "A" in m², derived from the product's nominal dimensions and adding a constant. In case of NOTUS-R the nominal dimension “DN” in millimeters is used. The equation for each type is as follows: NOTUS-R factor = 0,000019662 * DN² + 0,00167468 * DN + 0,228653 NOTUS-S factor = 9,3207967 * A² + 6,94668 * A + 0,769422 The coefficients and constants in each equation are specific to each product type and adjust for GWPtot differences between models. These equations enable you to estimate GWPtot correction factor for product sizes not listed in the table. By calculating "A" or "DN" for desired product size and applying the appropriate type of equation, you can determine the GWPtot correction factor. |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-11-22T12:55:10 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 968d95be-7a77-4c55-b045-00c376dd95e5 |
| Date of last revision | 2024-11-08T13:03:03.9244151Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-8049-7719 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle