Close Go back Collapse all sections
Process Data set: ABb PMB, Skanska Industrial Solutions, Dalby asfaltverk (en) en

Key Data Set Information
Location SE
Geographical representativeness description Sweden
Reference year 2024
Name
ABb PMB, Skanska Industrial Solutions, Dalby asfaltverk
Use advice for data set In accordance with EN 15804, the modules A1-A3, C, D are declared in this EPD. Modules A1-A3 represent a "cradle to gate" analysis for the asphalt production, and Modules C and D are reviewing the end of life stage for the product and its reuse, recovery and recycling potential. Declaration of the RSL is only possible if module B is included, and is therefore not assessed in this study. The flowchart below visualizes processes in the life cycle of the asphalt mass.
Technical purpose of product or process Hot mix bind course for roads ABb PMB
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Asphalt and crushed stone
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. eurobitume (2019) is not considered conservative according to EN 15804, but is used due to common practice in other LCA tools, EPDs and PCR. Specific environmental data from EPDs (Skanska EPD), in accordance with EN 15804, have been used for aggregates. Similarly, specific data have been used for transport distances from supplier to asphalt plant and for all factory data (energy use, waste quantities, etc.). For all other data, generic data available in the EPD tool have been used. Transport of reclaimed asphalt from the road to asphalt factory includes a return distance. For bitumen, generic data from Eurobitume is used because specific data cannot be determined from the mix of bitumen suppliers according to EU standards etc. used by Skanska. Environmental impact for reclaimed asphalt falls to previous product systems until arrival at the asphalt plant. The asphalt plant uses electricity marked "Good Environmental Choice". Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 1.0 kg
  • Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until 2029
Time representativeness description "2024-01-08" - "2029-01-08"
Technological representativeness
Technology description including background system ABb bind course according to Swedish road administration specification TDOK 2013:0529

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
Transport
A2
Manufacturing
A3
Transport
A4
De-construction
C1
Transport
C2
Waste processing
C3
Disposal
C4
Recycling Potential
D
Input
  • 14.21
  • 0.03125
  • 74.93
  • 0.623
  • 0.1159
  • 1.239
  • 0.06323
  • 0
  • -179.9
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 14.21
  • 0.03125
  • 74.93
  • 0.623
  • 0.1159
  • 1.239
  • 0.06323
  • 0
  • -179.9
Input
  • 454.1
  • 2.502
  • 82.55
  • 49.89
  • 19.63
  • 87.13
  • 11.69
  • 0
  • -3247
Input
  • 1768
  • 0
  • 0
  • 0
  • 0
  • 0
  • -196.9
  • 0
  • 0
Input
  • 2025
  • 2.502
  • 82.55
  • 49.89
  • 19.63
  • 87.13
  • -185.2
  • 0
  • -3247
Input
  • 1E+2
  • 0.0008567
  • 4.305
  • 0.01708
  • 0.00991
  • 0.03535
  • 0.005741
  • 0
  • -68.5
Input
  • 0.1243
  • 0.001094
  • 14.76
  • 0.02181
  • 0.003382
  • 0.0441
  • 0.001556
  • 0
  • -1.968
Input
  • 0.002779
  • 0.003669
  • 0.1947
  • 0.07315
  • 0.03924
  • 0.1582
  • 0.02289
  • 0
  • -0.8181
Input
  • 0.2253
  • 0.0002826
  • 0.511
  • 0.005635
  • 0.01308
  • 0.00924
  • 0.0006016
  • 0
  • -1.596
Output
  • 0.01368
  • 0.0001359
  • 0.117
  • 0.002709
  • 0.0005918
  • 0.004445
  • 0.0003441
  • 0
  • -1.304
Output
  • 0.6325
  • 0.2159
  • 1.089
  • 4.304
  • 0.02412
  • 4.204
  • 0.01384
  • 0
  • -4.212
Output
  • 0.02021
  • 0.00001696
  • 0.0003255
  • 0.0003381
  • 0.0001369
  • 0.000588
  • 0.00008117
  • 0
  • -0.02386
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.001339
  • 0.00001203
  • 2.51
  • 0.0002398
  • 0.00003696
  • 0.00049
  • 9E+2
  • 0
  • -0.2916
Output
  • 0.001558
  • 0.0007426
  • 0.0387
  • 0.01481
  • 0.009721
  • 0.0293
  • 0.00001748
  • 0
  • -0.02053
Output
  • 0.01163
  • 0.0001294
  • 0.03501
  • 0.00258
  • 0.0001156
  • 0.003399
  • 0.00005992
  • 0
  • -6.561
Output
  • 0.1779
  • 0.001966
  • 0.5296
  • 0.0392
  • 0.001749
  • 0.05145
  • 0.0009065
  • 0
  • -99.31

IndicatorUnit Raw material supply
A1
Transport
A2
Manufacturing
A3
Transport
A4
De-construction
C1
Transport
C2
Waste processing
C3
Disposal
C4
Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 2031
  • 2.484
  • 81.87
  • 49.52
  • 19.72
  • 86.44
  • 11.69
  • 0
  • -3247
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.00006626
  • 0.000002721
  • 0.0001665
  • 0.00005425
  • 0.000002306
  • 0.0001578
  • 0.000001303
  • 0
  • -0.0003064
Acidification potential, Accumulated Exceedance (AP)
  • 0.2276
  • 0.0004916
  • 0.2079
  • 0.0098
  • 0.01496
  • 0.01641
  • 0.008885
  • 0
  • -0.3483
Global Warming Potential - biogenic (GWP-biogenic)
  • 0.03484
  • 0.0001159
  • 0.00488
  • 0.00231
  • 0.0004812
  • 0.003073
  • 0.0001592
  • 0
  • 0
Global Warming Potential - fossil fuels (GWP-fossil)
  • 17.71
  • 0.1529
  • 9.155
  • 3.049
  • 1.432
  • 5.717
  • 0.846
  • 0
  • -34.57
Global Warming Potential - total (GWP-total)
  • 17.77
  • 0.1531
  • 9.168
  • 3.052
  • 1.433
  • 5.722
  • 0.846
  • 0
  • -34.6
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.02227
  • 0.00004652
  • 0.008466
  • 0.0009275
  • 0.0001192
  • 0.002034
  • 0.00006694
  • 0
  • -0.02759
  • 17.66
  • 0.1522
  • 19.48
  • 3.034
  • 1.352
  • 5.698
  • 0.8016
  • 0
  • -33.69
Eutrophication potential - freshwater (EP-freshwater)
  • 0.0003248
  • 0.000001217
  • 0.0003241
  • 0.00002426
  • 0.000005528
  • 0.0000455
  • 0.000003092
  • 0
  • -0.0007226
Eutrophication potential - marine (EP-marine)
  • 0.06716
  • 0.0001078
  • 0.01448
  • 0.002149
  • 0.006597
  • 0.003252
  • 0.003922
  • 0
  • -0.06646
Eutrophication potential - terrestrial (EP-terrestrial)
  • 0.8868
  • 0.001203
  • 0.8096
  • 0.02397
  • 0.07239
  • 0.0364
  • 0.04303
  • 0
  • -0.7533
Photochemical Ozone Creation Potential (POCP)
  • 0.2125
  • 0.0004722
  • 0.03902
  • 0.009415
  • 0.01991
  • 0.01393
  • 0.01183
  • 0
  • -0.4131
Depletion potential of the stratospheric ozone layer (ODP)
  • 9.598E-7
  • 3.687E-8
  • 4.98E-7
  • 7.35E-7
  • 3.087E-7
  • 0.000001295
  • 1.836E-7
  • 0
  • -0.00005095
Water (user) deprivation potential (WDP)
  • 138.2
  • 1.903
  • 1033
  • 37.93
  • 5.422
  • 83.56
  • 2.484
  • 0
  • -2.633E+4

IndicatorUnit Raw material supply
A1
Transport
A2
Manufacturing
A3
Transport
A4
De-construction
C1
Transport
C2
Waste processing
C3
Disposal
C4
Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 0.3952
  • 0.01085
  • 0.3775
  • 0.2163
  • 0.08471
  • 0.378
  • 0.05009
  • 0
  • -16.29
Potential incidence of disease due to PM emissions (PM) 2
  • 0.000001937
  • 1.229E-8
  • 0.000001728
  • 2.45E-7
  • 3.953E-7
  • 3.5E-7
  • 2.349E-7
  • 0
  • -0.000002206
Potential Soil quality index (SQP) 2
  • 326.4
  • 2.847
  • 49.45
  • 56.76
  • 2.514
  • 60.46
  • 1.485
  • 0
  • -731.6
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 3.033E-7
  • 1.757E-9
  • 2.446E-7
  • 3.5E-8
  • 1.012E-8
  • 7E-8
  • 6.302E-9
  • 0
  • -5.071E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 9.187E-9
  • 0
  • 5.106E-9
  • 0
  • 4.17E-10
  • 0
  • 0
  • 0
  • -2.025E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 6489
  • 1.816
  • 200.7
  • 36.2
  • 10.82
  • 64.08
  • 6.39
  • 0
  • -2062