Process Data set: DS Elcobyg facadeplade inkl. 33 kg armering pr. ton (en)

Process Data set: DS Elcobyg facadeplade inkl. 33 kg armering pr. ton (en) da

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Danmark, med en gennemsnitstransportafstand på 136 km
Reference year	2025
Name	DS Elcobyg facadeplade inkl. 33 kg armering pr. ton
Technical purpose of product or process	Facadeplade inkl. 33 kg armering. EPD'en er baseret på data for 12 sammenhængende måneder, for alle producerede facadeplader. EPD'en er baseret på data for 12 sammenhængende måneder, for alle producerede facadeplader. Dermed repræsentere den en gennemsnitlig facadeplade. Til beregning af miljøindikatorer per m² massiv facadeplade uden udsparinger kan følgende omregningsfaktorer bruges for de specificerede tykkelser. Vi gør opmærksom på, at anvendelsen af omregningsfaktorer også fører til en reduceret armeringsmængde, hvilket muligvis ikke svarer til den faktiske mængde, der bør indgå i jeres LCA-beregning. Omregningsfaktor 120 mm væg 288 kg/m2: 0,288 Omregningsfaktor 150 mm væg 357 kg/m2: 0,357 Omregningsfaktor 180 mm væg 425 kg/m2: 0,425 Omregningsfaktor 200 mm væg 471 kg/m2: 0,471 Omregningsfaktor 250 mm væg 586 kg/m2: 0,586 Omregningsfaktor 300 mm væg 701 kg/m2: 0,701 Den deklarerede enhed er 1 tons facadeplade med en gennemsnitlig betondensitet på 2295 kg/m3. Den mest anvendte betonstyrke er C30. Eksponeringsklasse: X0, XC4, XF1, XA1 Den gennemsnitlige elementtykkelse: 140 mm
General comment on data set	Datakvalitet: Specifikke data for produktsammensætningen er fremskaffet af producenten. De repræsenterer productionen af det deklarerede produkt og blev indsamlet til udarbejdelsen af denne EPDen i det angivne studieår. Baggrundsdata er baseret på EPDer iht. til EN 15804, og forskellige LCA databaser. Datakvaliteten for råmaterialerne i A1 er præsenteret i undernævnte tabel. Allokering: Allokering er foretaget iht. bestemmelser i EN 15804. Indgående energi og vand, samt produktion af affald i egen produktion er allokeret lige mellem alle produkterne gennem masseallokering. Miljøpåvirkninger og ressourceforbrug for primærproduktion af recirkulerede materialer er allokeret til det oprindelige produktsystem. Cut-off kriterier: Alle vigtige råmaterialer og alle vigtige energiforbrug er inkluderet. Produktionsprocesser for råmaterialer og energistrømme som indgår med meget små mængder (mindre end 1%) kan udelades iht. EN 15804. Disse cutoff kriterier gælder ikke for farlige materialer og stoffer.
Copyright	Yes
Owner of data set	DS Elcobyg
Quantitative reference
Reference flow(s)	DS Elcobyg facadeplade inkl. 33 kg armering pr. ton - 1.0 * 1000.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-04-29 - 2030-04-29
Publication date	2025-04-29
Technological representativeness
Technology description including background system	Betonelementer skal efterleve kravene i produktstandarderne. For vægge DS/EN 14992

Modelling and validation

Subtype

specific dataset

LCA methodology report

EN 16757:2022 for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

EN 16757:2022 for Concrete and concrete elements

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9876-9819_DS-Elcobyg-facadeplade-inkl.-33-kg-armering-pr.-ton.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Alexander Borg

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2026-07-31T19:49:51
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	9286a85a-65e0-4dd7-a854-4f1852d145c6
Date of last revision	2025-11-25T11:32:13.196995Z
Data set version	00.03.002
Registration authority	EPD Norway
Registration number	NEPD-9876-9819
Owner of data set	DS Elcobyg
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	260.9	6.607	37.9	2.42	0.2994	0.3288	10.97	0.06877	-27.02
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.1111	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	261	6.607	37.9	2.42	0.2994	0.3288	10.97	0.06877	-27.02
Use of non renewable primary energy (PENRE)	Input	MJ	1.43E+3	358.5	98.33	192.4	54.96	22.97	21.39	4.468	-228.6
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	53.23	0	0	0	0	0	-8.757	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1483	358.5	98.33	192.4	54.96	22.97	12.63	4.468	-228.6
Use of secondary material (SM)	Input	kg	38.5	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	59.85	0.3375	0.04249	0.08466	0	0.01176	0.0001023	0.001421	0.6416
Use of non renewable secondary fuels (NRSF)	Input	MJ	194.4	0.604	0.05518	0.2837	0	0.04206	0	0.004118	23.37
Use of net fresh water (FW)	Input	m3	1.263	0.0413	0.06794	0.02189	0.002829	0.002456	0.03721	0.005322	-1.38
Hazardous waste disposed (HWD)	Output	kg	0.3767	0.01844	0.2071	0.01053	0.001618	0.001185	0.002127	0.0002441	-0.1261
Non hazardous waste dispose (NHWD)	Output	kg	89.83	10.45	12.85	16.72	0.06508	1.117	0.0672	32.34	-9.505
Radioactive waste disposed (RWD)	Output	kg	0.01667	0.002455	0.0002589	0.001314	0.0003817	0.0001565	0.0002252	1.213E-9	-0.0002272
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	35.49	0	0	0	965.7	0	0
Materials for energy recovery (MER)	Output	kg	0	0	1.989	0	0	0	0.263	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	1.296	0	0	0	0.4041	0	0
Exported thermal energy (EET)	Output	MJ	0	0	19.61	0	0	0	6.113	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Use B1	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1457	358.5	98.33	192.4	0	54.96	22.97	21.38	4.468	-226.7
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0006793	0.0004043	0.00005111	0.0002111	0	0.000006128	0.00004196	0.00000877	0.000001225	-0.0005798
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.4738	0.3476	0.01507	0.03814	0	0.04178	0.004366	0.005687	0.001351	-0.1317
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	1.202	0.01326	0.1144	0.005074	0	0.0007487	0.0006287	0.005937	0.0001178	-0.05518
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	143.6	25.12	5.813	11.84	-6.15	3.992	1.519	1.308	0.1385	-24.75
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	144.9	25.14	6.005	11.85	-6.15	3.992	1.52	1.318	0.1386	-24.81
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.09604	0.009016	0.07764	0.003609	0	0.0003147	0.0005407	0.0009514	0.00002716	-0.01278
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	137	25.14	5.914	11.85	-6.15	3.992	1.52	1.309	0.1394	-36.14
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.01859	0.0002334	0.00003033	0.00009425	0	0.00001454	0.00001214	0.00004345	0.000001034	-0.001449
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.09823	0.08514	0.004886	0.008352	0	0.01844	0.0008638	0.001692	0.0005068	-0.02999
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.499	0.9481	0.05211	0.09315	0	0.1996	0.009662	0.0194	0.005583	-0.3168
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2789	0.2539	0.02256	0.03658	0	0.05563	0.003701	0.005178	0.001597	-0.1341
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000008091	0.000005354	0.000001062	0.000002856	0	8.623E-7	3.441E-7	1.365E-7	6.742E-8	-0.002583
Water (user) deprivation potential (WDP)	m3 world eqv.	3273	431.8	1.421E+4	147.5	0	11.68	22.22	2351	9.408	-531.5

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Use B1	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.165	1.614	0.1934	0.8409	0	0.2395	0.1004	0.3575	0.01939	-0.2541
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000409	0.0000015	2.34E-7	0.000001088	0	0.000005056	9.3E-8	8.944E-8	2.878E-8	-0.000002301
Potential Soil quality index (SQP)²	unitless	162	182.3	18.36	220.6	0	6.677	16.07	12.06	16.29	64.49
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	9.799E-7	2.2E-7	3.04E-8	1.36E-7	0	2.794E-8	1.86E-8	1.516E-8	1.295E-9	0.000002312
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.825E-8	0	1.263E-9	0	0	9.98E-10	0	1.002E-9	6.5E-11	-1.105E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1579	245.8	30.23	140.7	0	30.04	17.03	16.41	2.21	-1298