Process Data set: Hurdal 1200 Sensor Dim (en)

Process Data set: Hurdal 1200 Sensor Dim (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Hurdal 1200 Sensor Dim
Technical purpose of product or process	Hurdal is a highly efficient surface mounted luminaire for a wide variety of applications. It is easily installed directly in the ceiling or on the wall and has cable entrance in both ends in addition to two in the center. The luminaire is IP44 with steel base and aluminium end caps. Hurdal is available in three lengths. Dip switches makes it possible to adjust the light level. System Wattage: 24.0 W. Luminous flux: 3460lm. Efficacy: 144lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Sensor Dim. Luminiare class: Class I. Housing: Steel. Optics: UV-stabilized polycarbonate. Height: 76.0mm. Length: 1200.0 mm. Width: 72.0 mm. EAN: 7021981131074 The EPD also covers the following product: EAN: 7021981131104 - HURDAL 1200 4000K SENSOR DIM Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Hurdal 1200 Sensor Dim - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.588753369231 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-07-09 - 2030-07-09
Publication date	2025-07-09
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/hurdal/113107/pdf/specification_113107.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703030_Hurdal/50/703030_Hurdal.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11742-11688_Hurdal-1200-Sensor-Dim.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-27T15:32:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8e5ca7de-06a0-42fa-8849-da377647c6e1
Date of last revision	2025-07-07T11:57:15.918068Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11742-11688
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	43.06	0.01029	0.7637	0.2151	0.004712	3651	0.02578	0.1189	0.07396	-5.898
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	10.46	0	0	0	-10.42	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	53.51	0.01029	0.7637	0.2151	-10.41	3651	0.02578	0.1189	0.07396	-5.898
Use of non renewable primary energy (PENRE)	Input	MJ	275.3	0.9088	8.945	18.94	0.2862	282.3	2.278	0.9363	0.3134	-17.04
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	15.07	0	0	0	0	0	0	-16.21	0	0.0004917
Total use of non renewable primary energy resource (PENRT)	Input	MJ	290.2	0.9088	8.945	18.94	0.2862	282.3	2.278	-15.28	0.3134	-17.04
Use of secondary material (SM)	Input	kg	1.739	0	0	0	0	0	0	0	0.001591	0.02794
Use of renewable secondary fuels (RSF)	Input	MJ	1.947	0.0002012	0.0003524	0.00695	0.0001563	2.867	0.0005042	0.00221	0.000403	0.02273
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.681	0.001708	0.004238	0.03787	0.0006443	7.142	0.004281	-0.00005025	0.01391	0.3672
Use of net fresh water (FW)	Input	m3	0.2517	0.0001016	0.003775	0.001652	0.0001351	27.27	0.0002547	0.001384	0.0002725	-0.01652
Hazardous waste disposed (HWD)	Output	kg	0.3912	0.00008213	0.0007668	0.0009613	0	0.181	0.0002058	0.00002555	0.08248	-0.007178
Non hazardous waste dispose (NHWD)	Output	kg	10.08	0.04363	0.1133	0.6003	1.265	21.72	0.1093	0.03536	0.5193	-0.4397
Radioactive waste disposed (RWD)	Output	kg	0.00071	0.000005964	0.00001491	0.0001297	0	0.002524	0.00001495	0.000001322	9.567E-7	-0.00003678
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.06486	0	1.176	0	0	0.7962	0.00002669	-0.001094
Materials for energy recovery (MER)	Output	kg	0	0	0.004708	0	0.0255	0	0	0.2997	6.528E-7	-0.000144
Exported electrical energy (EEE)	Output	MJ	0	0	0.007233	0	0.07234	0	0	0.4589	0.00004235	-0.0003528
Exported thermal energy (EET)	Output	MJ	0	0	0.1094	0	1.094	0	0	6.943	0.0006407	-0.005337

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	290.1	0.9088	8.945	18.93	0.2862	281.9	2.278	0.936	0.3132	-17.04
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.007371	0.00000165	0.000002314	0.00002598	4.98E-7	0.00154	0.000004135	5.552E-7	1.37E-7	-0.001316
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2642	0.000184	0.005104	0.01986	0.00009689	0.1613	0.0004611	0.0004868	0.0001209	-0.07288
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.965	0.00002395	0.0001473	0.0004767	2.093	0.5709	0.00006003	0.003502	0.001607	-0.003206
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	23.33	0.06151	0.9935	1.338	0.02046	20.65	0.1541	0.7835	0.0529	-1.536
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	21.43	0.06156	0.9937	1.339	2.113	21.31	0.1543	0.7872	0.05465	-1.542
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.06123	0.00002249	0.0001075	0.0006582	0.000006767	0.08519	0.00005636	0.0001796	0.0001407	-0.003144
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	23.58	0.06156	0.9447	1.339	0.02047	21.26	0.1543	0.7864	0.05465	-1.491
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003013	5.77E-7	0.00001863	0.000008724	1.68E-7	0.001485	0.000001446	0.000003128	7.981E-7	-0.0004496
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02919	0.00003623	0.001159	0.00477	0.00003204	0.01773	0.00009079	0.0001327	0.00006971	-0.004079
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.4184	0.0004051	0.01278	0.05312	0.0003469	0.2308	0.001015	0.001422	0.0003484	-0.05505
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1351	0.0001517	0.004533	0.0144	0.00009972	0.06208	0.0003802	0.0003673	0.0001394	-0.01666
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000005665	1.338E-8	3.013E-8	2.947E-7	4.32E-9	0.000001416	3.352E-8	5.9E-9	2.588E-9	-0.003394
Water (user) deprivation potential (WDP)	m3 world eqv.	517.5	0.2964	0.7276	12.23	0.3628	1099	0.7427	7.121	2.571	2.864

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.064	0.003777	0.01146	0.08193	0.001225	5.114	0	0.009466	0.004397	0.001069	-0.04255
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001589	3.976E-9	6.177E-8	4.911E-8	1.431E-9	0.000001157	0	9.966E-9	3.003E-9	2.223E-9	-2.093E-7
Potential Soil quality index (SQP)²	unitless	97.48	0.6227	1.775	9.321	0.192	142	0	1.561	0.1942	0.8238	-14.72
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001516	7.23E-10	3.661E-8	9.724E-9	4.79E-10	0.000001444	0	1.812E-9	5.43E-8	6.5E-10	-2.74E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.517E-8	0	2.64E-10	0	1.1E-11	6.13E-8	0	0	9.31E-10	7.7E-11	-6.996E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2.52E+3	0.7368	23.22	13.02	0.3817	1284	0	1.846	2.88	134.2	-571.5