Prozess-Datensatz: Leca® 10-20 Coated (Small bags), Leca Denmark (de) en
Prozess-Information
| Kerninformationen des Datensatzes | |
| Ort | NO |
| Erläuterungen zur geographischen Repräsentativität | Denmark. |
| Referenzjahr | 2023 |
| Name |
|
| Technisches Anwendungsgebiet | The EPD describes results for production of lightweight expanded clay aggregate in bags of 50 liters, labelled Leca® 10-20 Coated, from the factory in Hinge, Denmark. Each pallet has 20 bags of 50L of Leca® 10-20 Coated which makes up 1 m3 of Leca® 10-20 Coated per pallet. Lightweight expanded clay aggregate is a granular ceramic material made from natural clay (see process information below). The main characteristic of expanded clay is low density combined with high strength. Leca® 10-20 Coated is used in lightweight blocks and slabs, insulation fill, water treatment, lightweight fillings and geotechnical fills for thermal and sound insulation purposes. Thus Leca® 10-20 Coated is typically hidden in buildings or cast into concrete. The density of Leca® 10-20 Coated is 0,245 tonnes per m3. The thermal insulation is 0,095 W/mK. Further information or explanatory material may be obtained by contacting Leca Danmark A/S. The water content of the Leca® 10-20 Coated is 0 % when the Leca® 10-20 Coated is produced and packed in bags of 50 liters at Leca Danmark A/S Hinge. The storage conditions can change the water content of the Leca® 10-20 Coated up to 25%. Different waste are recovered in the production process both as fuels as clay additives. See additional Tech info. Leca® 10-20 Coated is produced by using nearby clay and transported by using a conveyer belt to the factory. |
| Klassifizierung |
Klassenname
:
Hierarchieebene
|
| Allgemeine Anmerkungen zum Datensatz | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Ja |
| Eigentümer des Datensatzes | |
| Quantitative Referenz | |
| Referenzfluss(flüsse) |
|
| Biogener Kohlenstoffanteil |
|
| Zeitliche Repräsentativität | |
| Datensatz gültig bis | 2028 |
| Erläuterungen zur zeitlichen Repräsentativität | "2023-10-30" - "2028-10-30" |
| Technologische Repräsentativität | |
| Technische Beschreibung inklusive der Hintergrundsysteme | Loose bulk density (Test method: EN 1097-3): 0,245 ton/m3 Particle density (Test method: EN 1097-6 Annex C & E): 400 Kg/m3 Compressibility and confined compressive strenght (Test method: EN 13055-1): 0,75 MPa Thermal conductivity (Test method: EN 12667): 0,095 W/mK Reaction to fire: A1 |
Modellierung und Validierung
| Subtyp | specific dataset | ||||
| LCA-Methoden-Bericht | |||||
| Datenquellen, Behandlung und Repräsentativität | |||||
| Dokumentation des Datenqualitätsmanagements | |||||
| Für diesen Datensatz verwendete Datenquelle(n) | |||||
| Vollständigkeit | |||||
| Validierung | |||||
| |||||
| Konformitätsdeklarationen | |||||
| Konformität |
Konformitätsystemname
EN 15804+A2
|
Genehmigung der insgesamten Einhaltung
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Bewertung der Einhaltung
Fully compliant |
Dokumentation der Einhaltung
Fully compliant |
Einhaltung der Qualitätsvorgaben
Fully compliant |
| Konformität |
Konformitätsystemname
|
Genehmigung der insgesamten Einhaltung
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Bewertung der Einhaltung
Fully compliant |
Dokumentation der Einhaltung
Fully compliant |
Einhaltung der Qualitätsvorgaben
Fully compliant |
| Konformität |
Konformitätsystemname
|
Genehmigung der insgesamten Einhaltung
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Bewertung der Einhaltung
Fully compliant |
Dokumentation der Einhaltung
Fully compliant |
Einhaltung der Qualitätsvorgaben
Fully compliant |
Administrative Information
| Datengenerator | |
| Ersteller/Modellierer |
|
| Dateneingabe | |
| Zeitstempel (zuletzt gespeichert) | 2024-11-15T16:17:39 |
| Datensatzformat(e) | |
| Veröffentlichung und Eigentum | |
| UUID | 8dd11ac5-3192-4c32-b419-0e96b1234844 |
| Datum der letzten Überarbeitung | 2023-10-26T13:42:55.0396198Z |
| Datensatzversion | 00.04.000 |
| Registrierungsstelle | |
| Registrierungsnummer | NEPD-5285-4614-EN |
| Eigentümer des Datensatzes | |
| Copyright | Ja |
| Lizenztyp | Free of charge for all users and uses |
| Zugriffs- und Nutzungseinschränkungen | None |
Umweltindikatoren
Parameter zur Beschreibung des Ressourceneinsatzes und sonstige Umweltinformationen