Process Data set: Enøk Cl II (en) - EPD Global Digi Node

Process Data set: Enøk Cl II (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2024
Name	Enøk Cl II
Technical purpose of product or process	Round lamp in several sizes. Vandal-resistant with impact-resistant polycarbonate opalescent diffuser. The whole luminaire has been approved for common access routes and has vandal-resistant rating IK10. KI II, two cable inputs and the option of additional looping using the integrated quick clips. Can be mounted to either the wall or ceiling with both concealed and visible cabling. Many light source variants and sensors, wireless control and emergency light. System Wattage: 10.0 W. Luminous flux: 790lm lm. Efficacy: 79 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L70/B10>50,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II. Housing: Aluminium. Optics: UV-stabilized polycarbonate. Height: 92.0mm. Diameter: 300 mm. EAN: 7021981811938. The EPD also covers the following products: ENØK LED WHITE 10W CL II 4000K - EAN: 7021981811983. Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Enøk Cl II - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.096296296304 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-09-24" - "2029-09-24"
Publication date	2024-09-24
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/econ-led/181193/pdf/specification_181193.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/700620_Econ%20LED/50/700620_Enok%20LED.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-7627-7010_En-k-Cl-II.pdf

Original EPDs

NEPD-7627-7010_En-k-Cl-II.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T12:21:19
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8b937fda-5659-4b76-a3c7-3723a9508bd6
Date of last revision	2024-09-21T08:58:25.1722906Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-7627-7010
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	16.9	0.001143	0.4107	0.08092	0.0007749	1282	0.01019	0.02395	0.02411	-1.093
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.217	0	0	0	-1.217	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	18.12	0.001143	0.4107	0.08092	-1.216	1282	0.01019	0.02395	0.02411	-1.093
Use of non renewable primary energy (PENRE)	Input	MJ	124.4	0.101	4.081	7.122	0.04707	99.13	0.9	0.1994	0.135	-1.676
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	5.911	0	0	0	0	0	0	-6.279	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	130.4	0.101	4.081	7.122	0.04707	99.13	0.9	-6.08	0.135	-1.676
Use of secondary material (SM)	Input	kg	0.7243	0	0	0	0	0	0	0	0.0003382	0.0019
Use of renewable secondary fuels (RSF)	Input	MJ	0.09017	0.00002236	0.000361	0.002666	0.0000257	1.007	0.0001992	0.0004152	0.0002596	0.0003158
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0144	0.0001899	0.003398	0.01429	0.000106	2.508	0.001692	-0.00001584	0.002983	-0.08679
Use of net fresh water (FW)	Input	m3	0.1004	0.0000113	0.01113	0.0006124	0.00002221	9.576	0.0001006	0.0004329	0.0001468	-0.000341
Hazardous waste disposed (HWD)	Output	kg	0.0746	0.000009129	0.0005637	0.0003473	0	0.06356	0.00008133	0.000007813	0.02382	-0.001702
Non hazardous waste dispose (NHWD)	Output	kg	1.363	0.004849	0.03812	0.2199	0.208	7.626	0.0432	0.01055	0.3361	-0.006117
Radioactive waste disposed (RWD)	Output	kg	0.0002768	6.63E-7	0.00000312	0.00004887	0	0.0008864	0.000005906	3.881E-7	6.762E-7	-0.000003815
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01215	0	0.1935	0	0	0.5031	0.0000106	-0.00007438
Materials for energy recovery (MER)	Output	kg	0	0	0.002622	0	2.832E-7	0	0	0.1181	2.592E-7	-0.000009793
Exported electrical energy (EEE)	Output	MJ	0	0	0.003949	0	0.0119	0	0	0.1815	0.00001681	-0.00002399
Exported thermal energy (EET)	Output	MJ	0	0	0.05975	0	0.18	0	0	2.746	0.0002544	-0.000363

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	130.3	0.101	4.081	7.122	0.04707	98.98	0.8999	0.1993	0.135	-1.676
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005134	1.834E-7	0.000001425	0.000009612	8.189E-8	0.0005407	0.000001634	1.541E-7	5.17E-8	-0.0003996
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.08486	0.00002045	0.002409	0.007774	0.00001593	0.05666	0.0001822	0.0001257	0.00004872	-0.01663
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2817	0.000002662	0.0001148	0.0001789	0.3531	0.2005	0.00002372	0.00003638	0.000004135	-0.0000527
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	11.49	0.006837	0.4611	0.5043	0.003365	7.251	0.06091	0.2963	0.01992	-0.1239
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	11.23	0.006842	0.4612	0.5045	0.3565	7.482	0.06096	0.2964	0.01995	-0.1219
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02247	0.0000025	0.00007266	0.0002512	0.000001113	0.02991	0.00002227	0.000035	0.00003097	0.002096
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	11.58	0.006842	0.4356	0.5045	0.003366	7.467	0.06095	0.2964	0.02091	-0.127
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0009423	6.414E-8	0.00001024	0.000003218	2.763E-8	0.0005215	5.714E-7	5.677E-7	2.171E-7	-0.00009301
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01291	0.000004027	0.0004974	0.00187	0.00000527	0.006228	0.00003587	0.00004098	0.00002904	-0.0007918
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1499	0.00004503	0.005481	0.02083	0.00005705	0.08106	0.0004011	0.0004323	0.0001668	-0.01121
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.0448	0.00001686	0.001444	0.005629	0.0000164	0.0218	0.0001502	0.0001099	0.00005714	-0.003108
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003167	1.488E-9	6.757E-9	1.111E-7	7.1E-10	4.972E-7	1.325E-8	1.62E-9	1.399E-9	-0.001236
Water (user) deprivation potential (WDP)	m3 world eqv.	457.4	0.03294	0.665	4.717	0.05966	1.726E+4	0.2935	1.842	2.098	82.08

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.3249	0.0004199	0.00353	0.03088	0.0002014	1.796	0	0.00374	0.0009182	0.0006621	-0.005304
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.394E-7	4.41E-10	3.252E-8	1.783E-8	2.35E-10	4.062E-7	0	3.938E-9	7.13E-10	8.84E-10	-3.206E-8
Potential Soil quality index (SQP)²	unitless	44.6	0.06922	0.8647	3.436	0.03158	49.85	0	0.6166	0.04693	0.3195	-4.21
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.286E-7	7.7E-11	5.654E-9	3.556E-9	7.9E-11	5.071E-7	0	7.16E-10	1.633E-8	2.29E-10	-4.548E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.355E-8	0	1.29E-10	0	2E-12	2.152E-8	0	0	2.79E-10	2.1E-11	-2.99E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	737.7	0.08189	11.96	4.852	0.06277	451	0	0.7296	0.8804	133	-125.6