Process Data set: CircLED Bollard (en)

Process Data set: CircLED Bollard (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	CircLED Bollard
Technical purpose of product or process	Attractive, vandal-resistant LED bollard designed for use in public places, parks, paths, etc. CircLED combines energy saving with indirect light distribution, which gives comfortable and pleasant lighting without light pollution. Wattage: 16W. Voltage: 220-240V. Max. luminaires per circuit breaker: B10: 32, B16: 50, C10: 52, C16: 85. Luminous flux: 740lm. Efficacy: 46 lm/W. Colour temperature: 3000K. Colour rendering (CRI): Ra 98. MacAdams factor: SDCM: 2. Lifetime: L80/B10>100,000. Control/Dimming type: On/Off. Luminaire class: Class II. Contains light source of energy class: F. Breeam: Fulfils Hea 01 for flicker free lighting. Height (mm): 900. Diameter (mm): 220. EAN: 5703821168670. The EPD also covers the following product: EAN: 5703821162760 - CircLED Bollard Black 650lm 3000K Ra 98 On/Off EAN: 5703821181037 - CircLED Bollard Grey Soft 740lm 3000K Ra 98 On/Off EAN: 5703821176491 - CircLED Bollard Black Soft 770lm 4000K Ra 98 On/Off EAN: 5703821181044 - CircLED Bollard Grey Soft 770lm 4000K Ra 98 On/Off Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	CircLED Bollard - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.332357617077 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-10
Technological representativeness
Technology description including background system	Link to the CE declaration on our website: https://www.sg-as.com/int/en/file/techfile/YRUI/CircLED%20Bollard.pdf Link to product data on our website: https://www.sg-as.com/int/en/products/outdoor/bollards/circled-bollard/circled-pullert-soft-black-16w-3000k

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14021-14246_CircLED-Bollard%281%29.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-21T17:56:25
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8a503a7d-5a3a-4d88-94fd-fd3d3d794529
Date of last revision	2025-11-06T15:19:08.9482587Z
Data set version	00.02.003
Registration authority	EPD Norway
Registration number	NEPD-14021-14246
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	286.8	0.05415	71.45	0.6732	0.00268	5553	0.1122	0.4519	0.1659	-145.3
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	5.915	0	0	0	-5.916	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	292.8	0.05415	71.45	0.6732	-5.913	5553	0.1122	0.4519	0.1659	-145.3
Use of non renewable primary energy (PENRE)	Input	MJ	1086	5.882	79.29	47.03	0.1627	429.4	7.839	2.765	1.111	-400.7
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	18.57	0	0	0	-0.02973	0	0	-19.48	0	-0.1895
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1104	5.882	79.29	47.03	0.133	429.4	7.839	-16.72	1.111	-400.9
Use of secondary material (SM)	Input	kg	2.579	0	0	0	0	0	0	0	0.0008478	0.02281
Use of renewable secondary fuels (RSF)	Input	MJ	1.151	0.001637	1.939	0.02409	0.00008885	4.361	0.004014	0.009774	0.00281	-0.03865
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1983	0.01257	1.401	0.08612	0.0003661	10.86	0.01435	-0.0000397	0.009451	0.5328
Use of net fresh water (FW)	Input	m3	1.982	0.0004112	0.2107	0.005029	0.00007677	41.48	0.0008382	0.003183	0.00142	-0.7776
Hazardous waste disposed (HWD)	Output	kg	0.4853	0.0002675	0.07206	0.002425	0	0.2753	0.0004042	0.00001959	0.1369	0.1197
Non hazardous waste dispose (NHWD)	Output	kg	18.8	0.1024	4.135	2.287	0.7185	33.03	0.3812	0.2452	3.008	-9.229
Radioactive waste disposed (RWD)	Output	kg	0.004843	0.00004063	0.0002175	0.0003204	0	0.003839	0.00005339	9.729E-7	0.000006501	-0.001606
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	4.037	0	0.668	0	0	6.283	0.00003154	-0.0008959
Materials for energy recovery (MER)	Output	kg	0	0	0.3526	0	0.05018	0	0	0.5705	7.715E-7	-0.0001315
Exported electrical energy (EEE)	Output	MJ	0	0	0.2295	0	0.04106	0	0	0.5476	0.00005005	-0.0003123
Exported thermal energy (EET)	Output	MJ	0	0	3.472	0	0.6211	0	0	8.285	0.0007572	-0.004725

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1095	5.882	79.27	47.03	0.1627	428.8	7.838	2.764	1.111	-400.9
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01505	0.000005807	0.00004449	0.00008592	2.829E-7	0.002342	0.00001432	0.000002142	3.875E-7	-0.00118
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.5952	0.01045	0.02171	0.008939	0.00005505	0.2454	0.00149	0.001136	0.0003897	-0.2814
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.6597	0.0001378	0.2677	0.001287	1.219	0.8684	0.0002146	0.001358	0.00001812	-0.1422
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	81.81	0.4371	6.018	3.11	0.01167	31.41	0.5184	1.388	0.1037	-31.71
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	82.09	0.4372	6.301	3.113	1.23	32.41	0.5188	1.389	0.1038	-32.43
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.9428	0.0002596	0.01535	0.001107	0.000003845	0.1296	0.0001845	0.0002407	0.00009091	-0.5768
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	83.26	0.4372	7.889	3.113	0.01167	32.34	0.5188	1.389	0.1038	-30.98
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004994	0.000002298	0.0004028	0.00002485	9.545E-8	0.002259	0.000004142	0.000014	0.000001256	-0.001675
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.07456	0.00255	0.004213	0.001769	0.00001825	0.02698	0.0002948	0.0002758	0.0001717	-0.03007
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.9055	0.02839	0.05567	0.01978	0.0001971	0.3511	0.003297	0.003026	0.001462	-0.3425
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.282	0.00746	0.01276	0.007579	0.00005667	0.09443	0.001263	0.0008124	0.0004394	-0.1131
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000006976	9.461E-8	3.315E-7	7.046E-7	2.455E-9	0.000002154	1.174E-7	6.054E-8	1.275E-8	-0.003502
Water (user) deprivation potential (WDP)	m3 world eqv.	1.813E+4	2.644	936.2	45.49	0.2067	1672	7.581	12.99	25.03	-1.73E+4

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.306	0.02538	0.3236	0.2056	0.0006961	7.779	0	0.03426	0.01256	0.006721	-1.712
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000005477	7.759E-9	2.305E-7	1.904E-7	8.13E-10	0.00000176	0	3.174E-8	1.343E-8	6.473E-9	-0.00000233
Potential Soil quality index (SQP)²	unitless	2.4E+2	1.871	124.7	32.9	0.1094	215.9	0	5.483	0.9557	2.26	-18.86
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000003624	1.553E-9	9.178E-8	3.808E-8	2.72E-10	0.000002196	0	6.347E-9	4.417E-8	2.093E-9	-0.000001296
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.042E-7	0	2.592E-9	0	6E-12	9.324E-8	0	0	1.183E-9	1.22E-10	-8.482E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2975	3.727	128.4	34.86	0.2168	1953	0	5.81	12.54	1596	-1096