Process Data set: C10/C20-S LED KIT 1225 WH (2X54W) 6600 DALI 2XSM (en)

Process Data set: C10/C20-S LED KIT 1225 WH (2X54W) 6600 DALI 2XSM (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Nordic
Reference year	2025
Name	C10/C20-S LED KIT 1225 WH (2X54W) 6600 DALI 2XSM
Use advice for data set	The analysis is a cradle-to-grave study of one luminaire manufactured and installed, used according to a specific lighting regime over a specific lifetime, including waste treatment at end-of-life. A1-A5 includes the extraction and production of raw materials, transportation to the production site, the production process itself, transport to the market and assembly. B6 is the operational energy use stage of the luminaire based on a scenario. C1-C4 includes de-installation of the luminaire, average transport between building site and waste treatment facility, waste processing and disposal. Waste treatment of the product follows the default values provided in EN 50693. D shows the recyclability of metals and plastics and allows the producers a credit for the net scrap that is produced at the end of a product’s life. The benefits from recycling of net scrap are described in formula from EN 15804:2012+A2:2019. Substitution of heat and electricity generated by the incineration with energy recovery of plastic insulation and other parts is also calculated in module D.
Technical purpose of product or process	The C10/20-S LED KIT is a replacement kit to upgrade fluorescent luminaires to an energy-efficient LED solution. This environmental product declaration can be used for the following luminaires: CX0103486 - C10/C20-S LED KIT 1225 WH (2X54W) 6600 830 DALI 2XSM CX0103764 - C10/C20-S LED KIT 1225 WH (2X54W) 6600 840 DALI 2XSM The cover image shown may differ from the actual product.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Glamox AS
Quantitative reference
Reference flow(s)	C10/C20-S LED KIT 1225 WH (2X54W) 6600 DALI 2XSM - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.178240740755 kg Carbon content (biogenic) - packaging: 0.00471698113 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-02-05 - 2030-02-05
Publication date	2025-02-05
Technological representativeness
Technology description including background system	Please visit the product page on our website for more technical information.

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8975-8640_C10-C20-S-LED-KIT-1225-WH--2X54W--6600-DALI-2XSM.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-10T11:30:21
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	85e9e4c6-a3c1-4b24-b49f-56dd4c7a9499
Date of last revision	2025-02-05T08:33:35.7721256Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8975-8640
Owner of data set	Glamox AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	62.59	0.1351	20.46	0.102	0.001472	5681	0.03076	0.184	0.1499	-4.551
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.298	0	0	0	-3.539	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	65.89	0.1351	20.46	0.102	-3.538	5681	0.03076	0.184	0.1499	-4.551
Use of non renewable primary energy (PENRE)	Input	MJ	558.3	9.471	2.067	7.127	0.0894	5866	2.149	1.04	0.5459	-23.02
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	14.34	0	0	0	0	0	0	-15.49	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	572.6	9.471	2.067	7.127	0.0894	5866	2.149	-14.45	0.5459	-23.02
Use of secondary material (SM)	Input	kg	0.6399	0	0.007232	0	0	0	0	0	0.003387	0.006825
Use of renewable secondary fuels (RSF)	Input	MJ	0.7233	0.004831	0.01694	0.00365	0.00004881	57.38	0.0011	0.002974	0.0006954	0.04937
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.2762	0.01733	0.04747	0.01305	0.0002012	0	0.003935	-0.00006119	0.02973	1.289
Use of net fresh water (FW)	Input	m3	0.4081	0.00101	0.1551	0.0007622	0.00004218	25.84	0.0002298	0.001443	0.000435	-0.01488
Hazardous waste disposed (HWD)	Output	kg	0.3444	0.0004879	0.04863	0.0003676	0	0.5413	0.0001108	0.00002775	0.1705	-0.01064
Non hazardous waste dispose (NHWD)	Output	kg	5.237	0.458	0.6172	0.3466	0.395	35.86	0.1045	0.07799	0.5617	-0.7287
Radioactive waste disposed (RWD)	Output	kg	0.002812	0.00006452	0.00001577	0.00004855	0	0.06052	0.00001464	0.000001462	0.00000112	-0.00003326
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.5803	0	0.3674	0	0	1.417	0.0000169	-0.0002756
Materials for energy recovery (MER)	Output	kg	0	0	0.1194	0	0.02761	0	0	0.2284	4.133E-7	-0.00003622
Exported electrical energy (EEE)	Output	MJ	0	0	0.07266	0	0.02259	0	0	0.2894	0.00002681	-0.0000918
Exported thermal energy (EET)	Output	MJ	0	0	1.099	0	0.3418	0	0	4.378	0.0004056	-0.001389

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	570.3	9.471	2.065	7.127	0.08939	5776	2.149	1.039	0.5454	-23.02
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005398	0.00001723	0.000009162	0.00001302	1.555E-7	0.003324	0.000003926	8.192E-7	2.522E-7	-0.001287
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3414	0.001934	0.001307	0.001355	0.00003026	0.9859	0.0004084	0.0004697	0.0002177	-0.06737
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3759	0.0002589	0.01183	0.0001951	0.6709	3.906	0.00005882	0.0003599	0.00003256	-0.003378
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	45.76	0.6271	0.2163	0.4713	0.00639	213.8	0.1421	0.5963	0.06341	-2.257
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	45.46	0.6275	0.2287	0.4717	0.6772	229.4	0.1422	0.5969	0.06374	-2.263
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.07424	0.0002246	0.0005553	0.0001678	0.000002113	11.71	0.00005058	0.0002472	0.0002983	-0.002786
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	46.1	0.6275	0.2202	0.4717	0.006392	310.8	0.1422	0.5968	0.06532	-2.926
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.006871	0.000004992	0.000009737	0.000003766	5.246E-8	0.01414	0.000001135	0.000004162	0.000001637	-0.0004367
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0469	0.0003896	0.0002747	0.000268	0.00001001	0.1558	0.00008081	0.0001172	0.00007524	-0.004469
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5303	0.004356	0.003074	0.002998	0.0001083	2.092	0.0009039	0.001276	0.0005776	-0.05702
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1605	0.00162	0.0008497	0.001148	0.00003114	0.49	0.0003463	0.0003401	0.0002383	-0.01888
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003226	1.42E-7	1.53E-8	1.068E-7	1.349E-9	0.00002313	3.219E-8	1.487E-8	3.887E-9	-0.001989
Water (user) deprivation potential (WDP)	m3 world eqv.	1658	9.117	276	6.893	0.1133	4.466E+5	2.078	7.777	4.118	43

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.973	0.04139	0.03035	0.03115	0.0003825	131.7	0	0.009392	0.005062	0.001636	-0.03808
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002049	3.815E-8	1.606E-8	2.886E-8	4.46E-10	0.000005225	0	8.7E-9	4.1E-9	3.882E-9	-2.467E-7
Potential Soil quality index (SQP)²	unitless	167.9	6.593	1.211	4.985	0.05997	4352	0	1.503	0.2892	1.349	-12.37
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002212	7.634E-9	9.288E-9	5.771E-9	1.5E-10	0.000004437	0	1.74E-9	5.769E-8	1.348E-9	-8.587E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.489E-8	0	4.3E-10	0	3E-12	1.685E-7	0	0	1.057E-9	1.62E-10	-9.542E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2653	7.012	8.469	5.283	0.1192	7232	0	1.593	3.853	224	-529.5