Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | Product stage – Raw materials A1 Lintex has long term relations with its suppliers, and a continuous dialogue about environmental performance when extracting and producing raw materials and components. All wood based material is labeled with FSC ® (FSC-C170086) and standard fabrics are certified with EU Ecolabel or Oekotex. Waste and energy use at the suppliers are included in A1, as well as production of packaging material. Product stage – Transport A2 Transports are done by truck and/or ship from the supplier to Lintex manufacturing site in Nybro, Sweden. Product stage – Manufacturing A3 Manufacturing takes place in Nybro, Sweden and includes cutting, painting, laminating, assembling and packaging. From 2022 and onward, the factory in Nybro is a net producer of renewable energy, thanks to geothermal heating and 4400 solar panels installed on our factory roof, producing around 1600 MWh annually. |
| Technical purpose of product or process | Edge Wall is a wall mounted sound absorber suited for use in environments such as schools, offices and conference premises. The product is available in seven standard sizes and in four standard fabrics. Find out more on the webpage: https://www.lintex.com/en/products/office-screens/edge-wall/ Edge Wall consists of a solid wooden frame with a sound-absorbent filling in polyester, 50 % post-consumer recycled. The front is covered with wool or polyester fabric, while the back has a thin layer of polypropylen fabric. Inner corners, screws and supporting magnets are made of steel. The concealed wall fittings are made of extruded aluminium. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-10-21" - "2029-10-21" |
| Technological representativeness | |
| Technology description including background system | Size 500 x 1000 mm. Depth from wall 56 mm. Concealed fittings. The product is available in seven standard sizes. Edge Wall is labelled with FSC Mix (FSC-C170086), Möbelfakta (ID 0120210111) and assessed by Byggvarubedömningen (Recommended - ID 145604). It is tested and approved according to quality standard EN 1023:2000-1,2,3 and sound absorption standards SS-EN ISO 354:2003, SS 25269:2013, ISO 20189:2018 and SS-EN ISO 11654:1997 |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-10-31T11:09:15 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 82479252-a3c8-4693-a520-88b4a76dfc2d |
| Date of last revision | 2024-10-16T13:32:39.5418248Z |
| Data set version | 00.07.000 |
| Registration authority | |
| Registration number | NEPD-7864-7507 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle