Process Data set: Huldæk P50 Heidelberg Materials Precast Denmark rev.1 (en)

Process Data set: Huldæk P50 Heidelberg Materials Precast Denmark rev.1 (en) da

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Danmark
Reference year	2025
Name	Huldæk P50 Heidelberg Materials Precast Denmark rev.1
Technical purpose of product or process	Huldæk som etageadskillelse i elementbyggeri. https://precast.heidelbergmaterials.dk/ Denne EPD er udarbejdet på baggrund af 2024 gennemsnitsdata. Produkt EPD er udarbejdet for et huldæk i standard dimensioner. Spild som følge af kundens/rådgiverens ønske til bortskær/indgreb i elementerne, herunder breddevarianter, udsparinger og lignende er ikke medtaget i Produkt EPD. Den projektrelaterede spildfaktor kan eventuelt beregnes som total sum af pladernes længde * 1,197 m divideret med byggeriets huldæksareal. Spildfaktor multipliceres på miljøpåvirkningskategorierne. Alt øvrigt spild fra produktion – herunder restbeton, endestykker på banerne, kasserede elementer og fejlblandninger, er medtaget i produkt EPD. Data på denne EPD leveres pr. ton. For at regne miljøfaktorerne om til pr. m² huldæk, skal følgende omregningsfaktorer bruges. HD 180mm Uden fugebeton 301 kg/m² HD 220mm Uden fugebeton 301 kg/m² HD 265mm Uden fugebeton 353 kg/m² HD 320mm Uden fugebeton 421 kg/m² HD 400mm Uden fugebeton 495 kg/m² Ekstruderet forspændt huldæk i beton P50
General comment on data set	Datakvalitet: Specifikke data for produktsammensætningen er fremskaffet af producenten. De repræsenterer productionen af det deklarerede produkt og blev indsamlet til udarbejdelsen af denne EPDen i det angivne studieår. Baggrundsdata er baseret på EPDer iht. til EN 15804, og forskellige LCA databaser. Datakvaliteten for råmaterialerne i A1 er præsenteret i undernævnte tabel. Allokering: Allokering er foretaget iht. bestemmelser i EN 15804. Indgående energi og vand, samt produktion af affald i egen produktion er allokeret lige mellem alle produkterne gennem masseallokering. Miljøpåvirkninger og ressourceforbrug for primærproduktion af recirkulerede materialer er allokeret til det oprindelige produktsystem. Cut-off kriterier: Alle vigtige råmaterialer og alle vigtige energiforbrug er inkluderet. Produktionsprocesser for råmaterialer og energistrømme som indgår med meget små mængder (mindre end 1%) kan udelades iht. EN 15804. Disse cutoff kriterier gælder ikke for farlige materialer og stoffer.
Copyright	Yes
Owner of data set	Heidelberg Materials Precast Denmark A/S
Quantitative reference
Reference flow(s)	Huldæk P50 Heidelberg Materials Precast Denmark rev.1 - 1.0 * 1000.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-08-18 - 2030-08-18
Publication date	2025-08-18
Technological representativeness
Technology description including background system	https://precast.heidelbergmaterials.dk/betonelementer/huldaek/ Densitet på elementerne ses på datablad.

Modelling and validation

Subtype

average dataset

LCA methodology report

EN 16757:2022 for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

EN 16757:2022 for Concrete and concrete elements

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11992-12033_Huld--k-P50-Heidelberg-Materials-Precast-Denmark-rev.1.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Alexander Borg

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2026-07-31T19:47:40
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8121cfa3-7619-4215-ab70-866e4dcbbcea
Date of last revision	2025-11-10T13:46:30.5407096Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-11992-12033
Owner of data set	Heidelberg Materials Precast Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	138.2	1.224	54.73	5.49	0.3	0.5339	10.99	0.06892	-19.96
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	7.663	0	-0.6966	0	0	0	-6.966	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	145.9	1.224	54.03	5.49	0.3	0.5339	4.024	0.06892	-19.96
Use of non renewable primary energy (PENRE)	Input	MJ	413.5	103.8	209.8	436.5	55.07	42.45	21.48	4.477	-120.4
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	15.5	0	-1.409	0	0	0	-14.09	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	429	103.8	208.4	436.5	55.07	42.45	7.382	4.477	-120.4
Use of secondary material (SM)	Input	kg	13.17	0	0.03934	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	143.8	0.04288	0.04401	0.192	0	0.01868	0.0001556	0.001424	0.1681
Use of non renewable secondary fuels (NRSF)	Input	MJ	252	0.1527	0.1633	0.6436	0	0.06259	0	0.004144	9.605
Use of net fresh water (FW)	Input	m3	2.151	0.01091	0.01531	0.04966	0.002834	0.00483	0.03766	0.005333	-1.383
Hazardous waste disposed (HWD)	Output	kg	1.849	0.005447	0.3467	0.02388	0.001621	0.002322	0.002131	0.0003713	-0.05873
Non hazardous waste dispose (NHWD)	Output	kg	11.99	8.082	1.548	37.94	0.06521	3.689	0.06734	32.4	-4.203
Radioactive waste disposed (RWD)	Output	kg	0.002353	0.0007113	0.0004911	0.00298	0.0003824	0.0002898	0.0002256	1.844E-9	-0.0002707
Components for re-use (CRU)	Output	kg	0.00001475	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.355	0	106.7	0	0	0	967.6	0	0
Materials for energy recovery (MER)	Output	kg	0	0	1.089	0	0	0	0.4	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.6192	0	0	0	0.6146	0	0
Exported thermal energy (EET)	Output	MJ	0	0	9.368	0	0	0	9.298	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	466.4	103.8	209.7	436.5	55.07	42.44	21.47	4.477	-118.3
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0006288	0.0001058	0.00009064	0.0004788	0.00000614	0.00004656	0.000008823	0.000001228	-0.0003598
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2591	0.04454	0.04184	0.08652	0.04186	0.008414	0.005769	0.001354	-0.06771
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.5018	0.002631	-0.09784	0.01151	0.0007502	0.001119	0.6	0.000118	-0.04897
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	92.94	6.57	14.22	26.87	4	2.613	1.634	0.1388	-11.81
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	92.49	6.574	14.26	26.89	4	2.615	2.238	0.1389	-11.87
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.05936	0.002109	0.1419	0.008186	0.0003154	0.0007961	0.0009546	0.00002722	-0.007625
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	93.19	6.574	14.33	26.89	4	2.615	1.635	0.1401	-16.74
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.005563	0.00004801	0.00008112	0.0002138	0.00001457	0.00002079	0.0000436	0.000001036	-0.0006523
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.06938	0.009976	0.01707	0.01895	0.01848	0.001842	0.001729	0.0005078	-0.01681
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.7871	0.1117	0.1717	0.2113	0.2	0.02055	0.01979	0.005595	-0.1824
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2107	0.03494	0.04821	0.08298	0.05574	0.008069	0.005272	0.001601	-0.06957
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000001949	0.000001547	0.000002219	0.000006478	8.64E-7	6.3E-7	1.375E-7	6.756E-8	-0.003928
Water (user) deprivation potential (WDP)	m3 world eqv.	1912	73.55	64.39	334.6	11.7	32.54	2356	9.428	-1246

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.318	0.4534	0.3174	1.907	0.24	0.1855	0.3583	0.01943	-0.3097
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002274	5.247E-7	7.989E-7	0.000002468	0.000005066	2.4E-7	8.993E-8	2.884E-8	-0.000001241
Potential Soil quality index (SQP)²	unitless	52.67	107.8	94.67	500.3	6.69	48.65	12.09	16.32	72.69
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.396E-7	6.558E-8	7.343E-8	3.085E-7	2.8E-8	3E-8	1.604E-8	1.297E-9	9.506E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.213E-8	0	3.663E-9	0	1E-9	0	1.023E-9	6.5E-11	-4.806E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	592.4	73.67	59.09	319.1	30.1	31.03	17.12	2.215	-576.1