Process Data set: Protan SE-B 1.6 Waterproofing Membrane (en)

Process Data set: Protan SE-B 1.6 Waterproofing Membrane (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	European market
Reference year	2024
Name	Protan SE-B 1.6 Waterproofing Membrane
Technical purpose of product or process	Protan SE-B 1.6 is a high quality polyester reinforced thermoplastic waterproofing membrane with high tensile and tear strength. Protan SE-B 1.6 is used on exposed roof surfaces. The membrane can be mechanically fastened to the load bearing substrate or installed in a Protan vacuum roof system. The membrane can be used on roofs of all shapes and sizes – whether flat, sloped or curved. The membrane is used on warm/compact roof constructions as well as cold/ventilated constructions. Protan SE-B 1.6 contains stabilizers, which makes the product resistant to high and low temperatures, UV-resistant and flame retardant. All Chemicals in product are according to BASTA Properties Criteria and the sector requirements.
Classification	Class name : Hierarchy level EPDNorge: Construction / Paint
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Protan AS
Quantitative reference
Reference flow(s)	Protan SE-B 1.6 Waterproofing Membrane - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.012729824084 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-10-15" - "2029-10-15"
Publication date	10-15-2024
Technological representativeness
Technology description including background system	AI0039 0133, 1, PROTAN AS, AI0039 Construction products for Nordic Swan Ecolabelled buildings (089)

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 022:2018 Part B for Roof waterproofing

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 022:2018 Part B for Roof waterproofing

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7813-7489_-Protan-SE-B-16-Waterproofing-Membrane.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T17:59:14
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	8108c0cb-4770-40ee-ac29-b25e447cfedf
Date of last revision	2024-10-14T11:30:46.1881018Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-7813-7489
Owner of data set	Protan AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	10.48	0.0102	0.2879	0.0102	0.6427	0.03991	-15.14
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.4241	0	-0.4241	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	10.9	0.0102	-0.1362	0.0102	0.6427	0.03991	-15.14
Use of non renewable primary energy (PENRE)	Input	MJ	84.92	0.8107	0.03187	0.8107	5.036	0.4451	-2.451
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	43.82	0	-0.01274	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	128.7	0.8107	0.01913	0.8107	5.036	0.4451	-2.451
Use of secondary material (SM)	Input	kg	0.02366	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.3058	0.0003567	0.0002317	0.0003567	0.01162	0.0009816	-0.002651
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.07029	0.001195	0.0006264	0.001195	0	0.006517	-0.8974
Use of net fresh water (FW)	Input	m3	0.1174	0.00009225	0.002156	0.00009225	0.1205	0.0004138	-0.01823
Hazardous waste disposed (HWD)	Output	kg	0.01389	0.00004435	0.00001426	0.00004435	0	0.0274	-0.0001152
Non hazardous waste dispose (NHWD)	Output	kg	0.7048	0.07046	0.03261	0.07046	0	0.2769	-0.0579
Radioactive waste disposed (RWD)	Output	kg	0.0002295	0.000005535	1.989E-7	0.000005535	0	0.000001034	-0.00001283
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.00424	0	0.001642	0	0	0	0
Materials for energy recovery (MER)	Output	kg	0.000807	0	0.02888	0	1.91	0	0
Exported electrical energy (EEE)	Output	MJ	0.001299	0	0.0201	0	1.954	0	0
Exported thermal energy (EET)	Output	MJ	0.01965	0	0.3041	0	29.56	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	123.7	0.8107	0.03184	0.8107	5.035	0.4451	-2.451
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.05604	8.893E-7	1.347E-7	8.893E-7	0.000008061	2.266E-7	-0.000001705
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.03582	0.0001607	0.00001914	0.0001607	0.002213	0.0001996	-0.001412
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.0258	0.00002138	0.04672	0.00002138	0.001559	0.00003493	-0.0003538
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	5.492	0.04991	0.002457	0.04991	3.827	0.07225	-0.1714
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	5.471	0.04994	0.04919	0.04994	3.829	0.0723	-0.1776
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.003955	0.00001521	0.000006923	0.00001521	0.000299	0.000008812	-0.005904
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	5.45	0.04994	0.002506	0.04994	3.838	0.07566	-0.175
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0004589	3.971E-7	1.266E-7	3.971E-7	0.00001127	0.00000103	-0.00001523
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.006327	0.00003519	0.000004157	0.00003519	0.0005402	0.00005756	-0.0004616
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.08067	0.0003925	0.00004757	0.0003925	0.005793	0.0006682	-0.00499
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.02517	0.0001541	0.00001246	0.0001541	0.001639	0.000179	-0.001377
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000001397	1.203E-8	2.43E-10	1.203E-8	1.258E-7	4.65E-9	-0.01249
Water (user) deprivation potential (WDP)	m3 world eqv.	375.9	0.6215	3.887	0.6215	102.8	7.559	-30.52

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.2507	0.003543	0.0004382	0	0.003543	0.02446	0.002368	-0.01566
Potential incidence of disease due to PM emissions (PM)²	disease incidence	2.843E-7	4.584E-9	1.71E-10	0	4.584E-9	1.438E-8	1.84E-9	-8.556E-8
Potential Soil quality index (SQP)²	unitless	21.17	0.9292	0.01674	0	0.9292	1.834	1.449	-16.39
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.204E-7	5.73E-10	1.71E-10	0	5.73E-10	5.682E-8	2.505E-9	-1.278E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.607E-9	0	6E-12	0	0	5.37E-10	6.6E-11	-2.44E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	496.8	0.5927	0.1122	0	0.5927	241.3	1.257	-13.33