Close Go back Collapse all sections
Process Data set: Topvex FR (en) en

Key Data Set Information
Location SE
Geographical representativeness description Europe
Reference year 2025
Name
Topvex FR
Technical purpose of product or process Topvex FR air handling unit with twin rotor heat exchanger, integrated controls, re-heater. For use in ordinary comfort ventilation. Topvex FR air handling unit range from size 10 to 50 with capacities from approximately 240m³/h to 4800 m³/h. The EPD data is provided for size 10 (reference).
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 0.0 kg
  • Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until 2030
Technological representativeness
Technology description including background system Casing performance in accordance with EN 1886:2007: Casing air leakage: -400Pa: Class L1 (R) +400Pa: Class L1 (R) Filter by-pass air leakage: -400Pa: Class F9 (M) +400Pa: Class F9 (M) Thermal bridging factor: Class TB3 (M) Thermal transmittance: Class T3 (M Mechanical strength: Class D1 (M) ZM310 coated steel panels with 50 mm insulation and 30 mm insulation in casing. Corrosion resistance class C5 in accordance with ISO 12944-2:2017. Energy performance must be calculated using realistic project specific operating conditions. Complete and project specific product specification including all relevant technical data and energy performance can be generated using our Topvex calculation software, Systemair Configurator. Please refer to the Systemair website for more information. Topvex is Eurovent certified. The composition of materials is the same for all sizes, and the ratio of materials is almost equal among the sizes. Key EPD data for the full range is provided in the following table, including suggested conversion factors. Size specific EPDs are also available upon request.

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 1984
  • 1.217
  • 0.01708
  • 0.2029
  • 0.9771
  • 0.226
  • -219.7
Input
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 1984
  • 1.217
  • 0.01708
  • 0.2029
  • 0.9771
  • 0.226
  • -219.7
Input
  • 1.317E+4
  • 96.78
  • 3.158
  • 16.13
  • 7.425
  • 5.504
  • -1086
Input
  • 153.8
  • 0
  • 0
  • 0
  • -138.1
  • 0
  • 0
Input
  • 1.333E+4
  • 96.78
  • 3.158
  • 16.13
  • -130.7
  • 5.504
  • -1086
Input
  • 81.79
  • 0
  • 0.001551
  • 0
  • 0.00008639
  • 0.00004535
  • 1.502
Input
  • 29.59
  • 0.04258
  • 0.0004202
  • 0.007097
  • 0.02054
  • 0.004994
  • 3.16
Input
  • 65.28
  • 0.1427
  • 0.006183
  • 0.02378
  • -0.001348
  • 0.01442
  • 88.21
Input
  • 15.39
  • 0.01101
  • 0.0001625
  • 0.001835
  • 0.07187
  • 0.009579
  • -0.9711
Output
  • 9.951
  • 0.005295
  • 0.00009295
  • 0.0008824
  • 0.007683
  • 0.1317
  • -0.3938
Output
  • 342.3
  • 8.411
  • 0.003739
  • 1.402
  • 1.423
  • 27.86
  • -44.64
Output
  • 0.05312
  • 0.0006607
  • 0.00002193
  • 0.0001101
  • 0.000005427
  • 0.00001766
  • -0.001151
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 48.44
  • 0
  • 0.001523
  • 0
  • 142
  • 0.000571
  • -0.0588
Output
  • 6.793
  • 0
  • 0.000004721
  • 0
  • 2.95
  • 0.000008781
  • -0.007742
Output
  • 3.47
  • 0
  • 0.00001619
  • 0
  • 4.803
  • 0.0003328
  • -0.01897
Output
  • 52.5
  • 0
  • 0.0002449
  • 0
  • 72.66
  • 0.005036
  • -0.287

IndicatorUnit Production
A1-A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Abiotic depletion potential - fossil resources (ADPF)
  • 1.331E+4
  • 96.77
  • 3.158
  • 16.13
  • 7.424
  • 5.504
  • -1086
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.5124
  • 0.0001062
  • 3.52E-7
  • 0.00001769
  • 0.000008144
  • 0.000003074
  • -0.00626
Acidification potential, Accumulated Exceedance (AP)
  • 9.48
  • 0.01918
  • 0.0024
  • 0.003197
  • 0.004748
  • 0.001893
  • -1.458
Global Warming Potential - biogenic (GWP-biogenic)
  • 3.49
  • 0.002552
  • 0.00004301
  • 0.0004253
  • 0.003734
  • 0.0005056
  • -0.1873
Global Warming Potential - fossil fuels (GWP-fossil)
  • 1032
  • 5.957
  • 0.2294
  • 0.9929
  • 10.67
  • 0.6335
  • -115.6
Global Warming Potential - total (GWP-total)
  • 1039
  • 5.962
  • 0.2295
  • 0.9936
  • 10.68
  • 0.6341
  • -116.3
Global Warming Potential - land use and land use change (GWP-luluc)
  • 3.614
  • 0.001815
  • 0.00001808
  • 0.0003025
  • 0.0004289
  • 0.0001224
  • -0.5331
  • 1038
  • 5.962
  • 0.2295
  • 0.9936
  • 10.68
  • 0.6362
  • -112.4
Eutrophication potential - freshwater (EP-freshwater)
  • 0.09277
  • 0.0000474
  • 8.352E-7
  • 0.0000079
  • 0.00002647
  • 0.000004807
  • -0.01204
Eutrophication potential - marine (EP-marine)
  • 1.1
  • 0.004201
  • 0.001059
  • 0.0007001
  • 0.001755
  • 0.0008799
  • -0.1452
Eutrophication potential - terrestrial (EP-terrestrial)
  • 24.95
  • 0.04685
  • 0.01162
  • 0.007809
  • 0.01797
  • 0.006955
  • -1.689
Photochemical Ozone Creation Potential (POCP)
  • 4.275
  • 0.0184
  • 0.003196
  • 0.003066
  • 0.004536
  • 0.002029
  • -0.6574
Depletion potential of the stratospheric ozone layer (ODP)
  • 0.00007833
  • 0.000001436
  • 4.959E-8
  • 2.394E-7
  • 1.647E-7
  • 7.4E-8
  • -0.02237
Water (user) deprivation potential (WDP)
  • 1.373E+5
  • 74.19
  • 0.6709
  • 12.37
  • 65.22
  • 28.8
  • -9819

IndicatorUnit Production
A1-A3
 Transport
A4
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 71.7
  • 0.4229
  • 0.01353
  • 0.07049
  • 0.03187
  • 0.02506
  • -1.175
Potential incidence of disease due to PM emissions (PM) 2
  • 0.002223
  • 5.472E-7
  • 6.351E-8
  • 9.12E-8
  • 3.474E-8
  • 3.236E-8
  • -0.00001069
Potential Soil quality index (SQP) 2
  • 1.241E+4
  • 110.9
  • 0.4007
  • 18.49
  • 2.642
  • 14.45
  • -186.2
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 0.00007027
  • 6.84E-8
  • 1.566E-9
  • 1.14E-8
  • 6.262E-8
  • 5.6E-7
  • -0.000001476
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 0.000005167
  • 0
  • 0
  • 0
  • 1.37E-9
  • 8.261E-9
  • -5.85E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 4.698E+4
  • 70.75
  • 1.726
  • 11.79
  • 134.6
  • 830.6
  • -1.307E+4