Process Data set: Langfoss Maxi 40000 (en)

Process Data set: Langfoss Maxi 40000 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Langfoss Maxi 40000
Technical purpose of product or process	Langfoss Maxi is a powerful floodlight luminaire suitable for lighting large spaces, transport and storage areas, playgrounds, courts and car parks. Can also be used as facade lighting. Nordic design for Nordic conditions.The sloping top allows snow to slide off, and the bracket can withstand heavy loads. Asymmetrical optics send the light where it is needed, and the mounting bracket can be angled as required. Super simple installation with two-piece mounting bracket with hooks. Die-cast powder-coated aluminium with tempered glass front. Accessories for flexible installation: bracket for side mounting on post, corner bracket and extension cable. Wattage: 267W. Luminous flux: 30350 lm. Efficacy: 151 lm/W. Colour temperature: 4000 K. Colour rendering: Ra>70. MacAdams factor: SDCM:3 . Lifetime: L80/B50>100,000, L90/B10>50,000. Light distribution: Asymmetric. Control/dimming type: On/Off. Luminiare class: Class I. Housing: Die-cast aluminium. Optics: Tempered glass. Height: 85 mm. Width: 443 mm. Length: 552. EAN: 7021986419450. The EPD also covers the following products: EAN: 7021986419443 - LANGFOSS MAXI 40000 3000K EAN: 7021986419221 - LANGFOSS MAXI 40000 3000K Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Langfoss Maxi 40000 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.433333333368 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-01-19" - "2029-01-19"
Publication date	2024-01-19
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/701269_Langfoss%20Maxi/50/701269_Langfoss%20Maxi.pdf Link to product data on our website: https://www.sg-as.com/products/langfoss-maxi/641945/pdf/specification_641945.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-5843-5124_Langfoss-Maxi-40000.pdf

Original EPDs

NEPD-5843-5124_Langfoss-Maxi-40000.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T12:18:57
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	7c4cc16d-e77d-476e-8bc6-67bff5956ae7
Date of last revision	2024-01-17T09:11:40.5664105Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-5843-5124-EN
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	468	0.2317	4.997	0.9846	0.003487	3.047E+4	0.154	0.8639	0.9636	-13.05
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	7.675	0	0	0	-7.676	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	475.6	0.2317	4.997	0.9846	-7.673	3.047E+4	0.154	0.8639	0.9636	-13.05
Use of non renewable primary energy (PENRE)	Input	MJ	4.25E+3	20.47	49.66	86.66	0.2118	2356	10.76	5.968	3.496	-147.4
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	33.28	0	0	0	0	0	0	-47.76	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	4283	20.47	49.66	86.66	0.2118	2356	10.76	-41.79	3.496	-147.4
Use of secondary material (SM)	Input	kg	6.654	0	0	0	0	0	0	0	0.03432	0.06515
Use of renewable secondary fuels (RSF)	Input	MJ	4.218	0.004531	0.004393	0.03244	0.0001157	23.93	0.00551	0.0133	0.004251	0.0816
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.191	0.03847	0.04135	0.1738	0.0004768	59.62	0.0197	-0.0006309	0.1919	1.873
Use of net fresh water (FW)	Input	m3	3.161	0.002289	0.1354	0.007451	0.00009995	227.6	0.001151	0.00529	0.00267	-0.08139
Hazardous waste disposed (HWD)	Output	kg	1.89	0.00185	0.006859	0.004226	0	1.511	0.0005548	0.0003072	1.116	-0.06035
Non hazardous waste dispose (NHWD)	Output	kg	54.94	0.9826	0.4639	2.676	0.936	181.3	0.5232	0.4157	3.713	-2.315
Radioactive waste disposed (RWD)	Output	kg	0.009239	0.0001343	0.00003797	0.0005947	0	0.02107	0.00007329	0.0000154	0.000006212	-0.000392
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.1479	0	0.8706	0	0	7.721	0.00005699	-0.002549
Materials for energy recovery (MER)	Output	kg	0	0	0.0319	0	0.06543	0	0	0.3825	0.0003082	-0.0003357
Exported electrical energy (EEE)	Output	MJ	0	0	0.04805	0	0.05354	0	0	0.5877	0.002783	-0.0008225
Exported thermal energy (EET)	Output	MJ	0	0	0.727	0	0.8099	0	0	8.892	0.04211	-0.01244

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	4283	20.47	49.66	86.66	0.2118	2353	10.76	5.966	3.493	-147.4
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.08127	0.00003716	0.00001734	0.000117	3.685E-7	0.01285	0.00001965	0.000004862	0.000001644	-0.01555
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	2.737	0.004144	0.02931	0.0946	0.0000717	1.347	0.002045	0.002544	0.001395	-0.6965
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1352	0.0005395	0.001397	0.002176	1.589	4.765	0.0002945	0.001124	0.0002534	-0.03642
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	377.5	1.385	5.61	6.137	0.01514	172.4	0.7115	1.523	0.3048	-12.23
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	377.8	1.386	5.612	6.139	1.604	177.8	0.7121	1.525	0.3071	-12.26
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.5014	0.0005065	0.0008842	0.003056	0.000005008	0.711	0.0002532	0.001429	0.001948	0.009602
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	379.3	1.386	5.3	6.139	0.01515	177.5	0.712	1.525	0.3152	-13.22
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.04611	0.000013	0.0001246	0.00003916	1.243E-7	0.0124	0.000005685	0.00001828	0.00001052	-0.003902
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.4469	0.000816	0.006053	0.02276	0.00002371	0.148	0.0004046	0.0005217	0.0003847	-0.03736
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	5.084	0.009124	0.06669	0.2534	0.0002567	1.927	0.004526	0.0058	0.003697	-0.5099
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	1.495	0.003417	0.01757	0.06849	0.0000738	0.5182	0.001734	0.001611	0.001516	-0.1472
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001916	3.013E-7	8.222E-8	0.000001352	3.196E-9	0.00001182	1.612E-7	4.027E-8	2.478E-8	-0.003756
Water (user) deprivation potential (WDP)	m3 world eqv.	9675	6.675	8.092	57.39	0.2685	4.101E+5	10.41	61.16	23.42	622.6

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	11.52	0.08507	0.04296	0.3757	0.0009063	42.69	0	0.04702	0.03068	0.01014	-0.442
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00002358	8.956E-8	3.958E-7	2.169E-7	1.058E-9	0.000009655	0	4.356E-8	1.697E-8	2.536E-8	-0.000001576
Potential Soil quality index (SQP)²	unitless	980.3	14.02	10.52	41.81	0.1421	1185	0	7.525	1.492	8.335	-113.8
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00001404	1.628E-8	6.88E-8	4.327E-8	3.55E-10	0.00001205	0	8.712E-9	6.161E-7	8.203E-9	-0.000001715
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.44E-7	0	1.578E-9	0	8E-12	5.116E-7	0	0	1.048E-8	1.053E-9	-3.315E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2.437E+4	16.59	145.6	59.04	0.2825	1.072E+4	0	7.975	12.62	1513	-5052