Process Data set: StoPox WL 200 (en)

Process Data set: StoPox WL 200 (en) en

Process information

Key Data Set Information
Location	DE
Geographical representativeness description	The market is Europe with a focus on Germany
Reference year	2025
Name	StoPox WL 200
Use advice for data set	The scope of this EPD is cradle to gate with options, modules C1-C4 and module D. No actions are necessary during User stage
Technical purpose of product or process	StoPox WL 200 is a slip-resistent epoxy and water-based coating material in accordance with EN 1504-2. The area of application is interior and exposed to weather. StoPox WL 200 can be used for cementitious substrates, magnesite and calcium sulphate screeds as well as a coloured sealing coat on industrial floor surfaces. StoPox WL 200 is delivered in two components, StoPox WL 200 Component A and StoPox WB/WL/WG Component B, which have to be mixed as stated on the technical data sheet before use. This EPD calculates the environmental impact of the correctly mixed product at the construction site. The composition of the mixed product is stated in the following table:
Classification	Class name : Hierarchy level EPDNorge: Construction / Paint
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Sto SE & Co. KGaA
Quantitative reference
Reference flow(s)	StoPox WL 200 - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-12-18 - 2030-12-18
Publication date	2025-12-18
Technological representativeness
Technology description including background system	Information on the technical data of StoPox WL 200 as well as the mixing and application process can be found in the Technical Data Sheet on www.sto.de for Germany as well as the country specific product page.

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR Part B for coatings with organic binders

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR Part B for coatings with organic binders

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14511-14998_StoPox-WL-200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-12-29T12:26:01
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	7a4c3059-7995-49ce-b532-8df0602ce36b
Date of last revision	2025-12-18T06:36:25.0244228Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-14511-14998
Owner of data set	Sto SE & Co. KGaA
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	7.881	0.01787	0.0002075	0.01088	0.3967	0.00001989	0.003627	0.001135	0.007274	-0.002176
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	7.881	0.01787	0.0002075	0.01088	0.3967	0.00001989	0.003627	0.001135	0.007274	-0.002176
Use of non renewable primary energy (PENRE)	Input	MJ	39.29	1.248	0.02487	0.7602	2.1	0.003678	0.2534	0.002206	0.2031	-0.004294
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.892	0	0	0	-1.049	0	0	-1.788	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	42.18	1.248	0.02487	0.7602	1.051	0.003678	0.2534	-1.786	0.2031	-0.004294
Use of secondary material (SM)	Input	kg	0.02796	0	0	0	0.001398	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.007699	0.0006393	0.00003225	0.0003893	0.0005813	4.894E-7	0.0001298	0	0.000151	-0.00001877
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.001403	0.002286	0.00001244	0.001392	0.0003096	0.000007201	0.000464	0	0.0003259	-0.00009429
Use of net fresh water (FW)	Input	m3	0.09888	0.0001335	0.000003726	0.0000813	0.004974	1.893E-7	0.0000271	0.000003778	0.00025	-0.0001438
Hazardous waste disposed (HWD)	Output	kg	0.25	0.00006438	0.0005365	0.00003921	0.01253	1.083E-7	0.00001307	2.203E-7	0	-9.433E-7
Non hazardous waste dispose (NHWD)	Output	kg	14.45	0.06071	0.0005416	0.03697	0.799	0.000004354	0.01232	0.000006959	0.9	-0.00003317
Radioactive waste disposed (RWD)	Output	kg	0.00008355	0.000008503	2.996E-8	0.000005178	0.000004961	2.554E-8	0.000001726	2.332E-8	0	-3.18E-8
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0	0	0.01827	0	0	0.1	0	0
Materials for energy recovery (MER)	Output	kg	0	0	0.002431	0	0.0001216	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.001445	0	0.000236	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.02186	0	0.003571	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	40.71	1.248	0.02486	0.7602	2.171	0.003678	0.2534	0.002205	0.2031	-0.004078
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0006414	0.00000228	2.577E-9	0.000001389	0.00003229	4.1E-10	4.629E-7	9.01E-10	6.65E-8	-2.047E-8
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.03984	0.0002373	0.000002922	0.0001445	0.00202	0.000002795	0.00004816	5.748E-7	0.00006567	-0.000002179
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01467	0.00003417	0.0002805	0.00002081	0.0007538	5.009E-8	0.000006936	6.134E-7	0.000008619	-0.000004597
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.869	0.08256	0.002796	0.05028	0.1537	0.0002672	0.01676	0.000071	0.007383	-0.0002433
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.884	0.08262	0.003076	0.05032	0.1545	0.0002673	0.01677	0.000072	0.007394	-0.0002485
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001035	0.00002938	1.334E-7	0.00001789	0.00005489	2.106E-8	0.000005965	9.826E-8	0.000001815	-6.497E-7
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.875	0.08262	0.003014	0.05031	0.154	0.0002673	0.01677	0.0000711	0.007385	-0.0002596
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001174	6.596E-7	1.095E-8	4.017E-7	0.00005881	9.73E-10	1.339E-7	4.487E-9	8.368E-8	-7.362E-9
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.007366	0.00004695	0.000001489	0.00002859	0.0003763	0.000001234	0.00000953	1.684E-7	0.0000244	-7.534E-7
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.03896	0.0005251	0.00001126	0.0003198	0.00202	0.00001354	0.0001066	0.00000194	0.0002692	-0.000008817
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.01194	0.0002012	0.000003318	0.0001225	0.0006227	0.000003722	0.00004083	5.195E-7	0.00007708	-0.000002332
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.0001059	1.87E-8	2.29E-10	1.139E-8	0.000005298	5.8E-11	3.796E-9	1.4E-11	2.795E-9	-0.000001047
Water (user) deprivation potential (WDP)	m3 world eqv.	11.66	1.207	0.01401	0.7353	0.8201	0.0007813	0.2451	0.2434	1.253	-0.1842

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	126.4	0.005456	0.0000205	0.003323	6.323	0.00001576	0.001108	0.000037	0.0009274	-0.00003686
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.627E-7	5.055E-9	3.4E-11	3.078E-9	1.871E-8	7.4E-11	1.026E-9	9E-12	1.401E-9	-5.1E-11
Potential Soil quality index (SQP)²	unitless	57.41	0.8731	0.001755	0.5317	3.004	0.0004667	0.1772	0.001247	0.7821	0.007417
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.697E-7	1.011E-9	1.4E-11	6.16E-10	4.359E-8	2E-12	2.05E-10	1E-12	8E-11	-6E-12
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.439E-8	0	0	0	7.2E-10	0	0	0	5E-12	0
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	83.26	0.9253	0.00897	0.5635	4.263	0.00201	0.1878	0.001563	0.1108	-0.005105